===================== Product Identification =====================
MSDS NAME:JET-WELD TE-031 THERMOSET ADHESIVE
NIIN:00F039906
MSDS Number: BXKSC
=== Responsible Party ===
Company:MINNESOTA MINING INDUSTRIAL TAPE & SPECIALTIES DIV
Address:3M CENTER
City:ST PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1110
Emergency Phone Num:612-733-1110
CAGE:76381
=== Contractor Identification ===
Company:MINNESOTA MINING & MFG CO INDUSTRIAL TAPE & SPECIALTIES
DIV
Address:3M CENTER
Box:City:ST PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:1-800-364-3577
CAGE:52152
Company:MINNESOTA MINING AND MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381
============= Composition/Information on Ingredients =============
Name:POLYURETHANE RESIN
Fraction by Wt: 95-100%
Name:DIPHENYLMETHANEDIISOCYANATE (MDI), METHYLENE BIS
(PHENYLISOCYANATE), 4,4 DIPHENYLMETHANE DIISOCYANATE (MDI)
CAS:101-68-8
RTECS #:NQ9350000
Fraction by Wt: 1-5%
Other REC Limits:0.005 PPM
OSHA PEL:0.02 PPM
ACGIH TLV:0.051 MG/CUM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: ALLERGIC
REACTION, BURNS, IRRITATION. INHALATION: ALLERGIC REACTION,
RESPIRATORY FAILURE, IRRITATION. INGESTION: IRRITATION TO GI
TISSUES.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, REDNESS, SWELLING, BLISTERING,
ITCHING, BURNING PAIN, RED/SWELLING, DIFFICULTY BREATHING,
WHEEZING, TIGHTNESS OF CHEST, NOSE/THROAT SORENESS, COUGHING,
SNEEZING, PAIN, VOMITING, ABDOMINAL TENDERNESS, NAUSEA, BLOOD IN
VOMITUS & FECES.
======================= First Aid Measures =======================
Eyes: IMMEDIATELY FLUSH W/LARGE AMOUNTS OF WATER. SKIN:
IMMEDIATELY FLUSH W/LARGE AMOUNTS OF WATER & COVER W/CLEAN
DRESSING. DON'T ATTEMPT TO REMOVE ADHESIVE. HAVE BURN TREATED.
INHALATION: REMOVE TO FRESH AIR. GIVE CPR IF NEEDED. INGESTION:
DON'T INDUCE VOMITING. DRINK 2 GLASSES OF WATER. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point:>390F
Extinguishing Media:WATER, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING/INCLUDING
HELMET/SELF CONTAINED POSITIVE PRESSURE/PRESSURE DEMAND BREATHING
APPARATUS/BUNKER COAT & PANTS (SEE SUPP)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HEAT MAY
BUILD PRESSURE & EXPLODE.
================== Accidental Release Measures ==================
Spill Release Procedures:COVER W/WATER. COLLECT MATERIAL. PLACE IN A
U.S. DOT-APPROVED CONTAINER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AT ROOM TEMP. KEEP CONTAINER
CLOSED WHEN NOT IN USE. KEEP TIGHTLY CLOSED.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. AVOID SKIN CONTACT
W/HOT ADHESIVE & APPLICATOR TIP. DON'T INGEST. FOR
INDUSTRIAL/PROFESSIONAL USE ONLY. AVOID PROLONGED BREATHING OF
VAPORS. AVOID EYE CONTACT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH APPROVED-HALF MASK SUPPLIED AIR
RESPIRATOR.
Ventilation:CONDUCT AIR MONITORING TO DETERMINE ADEQUACY.
Protective Gloves:REQUIRED
Eye Protection:VENTED GOGGLES
Supplemental Safety and Health
SPECIAL FIRE CONT'D: BANDS AROUND ARMS, WAIST & LEGS, FACE MASK,
PROTECTIVE COVERING FOR AREAS OF THE HEAD.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:302F
Vapor Density:8.6
Spec Gravity:1.04
Appearance and Odor:WHITE/OFF-WHITE NON-TACKY SOLID W/MILD ODOR
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AMINES/ALCOHOLS/WATER.
Stability Condition to Avoid:TEMP >275F, HEAT
Hazardous Decomposition Products:CO, CO2, HYDROGEN CYANIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF COMPLETELY ABSORBED WASTE PRODUCT IN
A FACILITY PERMITTED TO ACCEPT CHEMICAL WASTES. DISPOSE OF
IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|