===================== Product Identification =====================
MSDS NAME:FASTBOND 50-NF HIGH PERFORMANCE CONTACT ADHESIVE
NIIN:00F039907
MSDS Number: BXKSD
=== Responsible Party ===
Company:MINNESOTA MINING INDUSTRIAL TAPE & SPECIALTIES DIV
Address:3M CENTER
City:ST PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1110
Emergency Phone Num:612-733-1110
CAGE:76381
=== Contractor Identification ===
Company:MINNESOTA MINING & MFG CO INDUSTRIAL TAPE & SPECIALTIES
DIV
Address:3M CENTER
Box:City:ST PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:1-800-364-3577
CAGE:52152
Company:MINNESOTA MINING AND MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381
============= Composition/Information on Ingredients =============
Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 45-55%
Name:NEOPRENE, 2 CHLORO-1, 3-BUTADIENE HOMOPOLYMER, CHLOROPRENE
POLYMER
CAS:9010-98-4
RTECS #:EI9640000
Fraction by Wt: 30-40%
Name:RESIN BLENDS (NOT SPECIFIED)
Fraction by Wt: 10-20%
Name:TOLUENE (IARC CARC- GROUP 3) *95-1*
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: <2%
Other REC Limits:375 MG/CUM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:METHANOL (METHYL ALCOHOL), COLUMBIAN SPIRITS *95-1*
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: <1%
Other REC Limits:200 PPM
OSHA PEL:260 MG/CUM
ACGIH TLV:262 MG/CUM (SKIN)
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MODERATE IRRITATION. SKIN: MILD
IRRITATION. INHALATION: UPPER RESPIRATORY IRRITATION. INGESTION: GI
TISSUES IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, REDNESS, SWELLING, PAIN, TEARING,
HAZY VISION, ITCHING, NOSE/THROAT SORENESS, COUGHING, SNEEZING,
VOMITING, ABDOMINAL TENDERNESS, NAUSEA, BLOOD IN VOMITUS & FECES.
======================= First Aid Measures =======================
Eyes: IMMEDIATELY FLUSH W/LARGE AMOUNTS OF WATER. SKIN: FLUSH
W/LARGE AMOUNTS OF WATER. INHALATION: REMOVE TO FRESH AIR.
INGESTION: DON'T INDUCE VOMITING. DRINK 2 GLASSES OF WATER. OBTAIN
MEDICAL ATTE NTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point:NONE
Extinguishing Media:WATER SPRAY, CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING, INCLUDING
HELMET/SCBA IN POSITIVE PRESSURE/PRESSURE DEMAND MODE/BUNKER COAT &
PANTS/BANDS AROUND ARMS, WAIST & LEGS. (SEE SUPP)
================== Accidental Release Measures ==================
Spill Release Procedures:COVER W/ABSORBENT MATERIAL. COLLECT MATERIAL.
PLACE IN A U.S. DOT-APPROVED CONTAINER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
KEEP TIGHTLY CLOSED. USE IN A VENTILATED AREA.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. AVOID BREATHING
VAPORS/MIST/SPRAY. AVOID EYE CONTACT W/VAPOR/SPRAY MIST. AVOID
PROLONGED/REPEATED SKIN CONTACT. DON'T INGEST.
============= Exposure Controls/Personal Protection =============
Ventilation:FUNCTIONING SPRAY BOOTH/LOCAL EXHAUST.
Protective Gloves:BUTYL RUBBER, NEOPRENE, NITRILE RUBBER
Eye Protection:VENTED GOGGLES
Other Protective Equipment:SAFETY GLASSES W/SIDE SHIELDS.
Supplemental Safety and Health
SPECIAL FIRE CONT'D: FACE MASK & PROTECTIVE COVERING FOR EXPOSED AREAS
OF THE HEAD. PH: 7.5-8.5
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:212F
Vapor Density:1.1
Spec Gravity:1.09
pH:(SUPP)
Evaporation Rate & Reference:(WATER =1): 1
Solubility in Water:APPRECIABLE
Appearance and Odor:BLUE LIQUID W/SLIGHT AMMONIA ODOR
Percent Volatiles by Volume:52/WT
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2, HYDROGEN CHLORIDE, ALDEHYDES,
KETONES, TOXIC VAPORS, GASES/PARTICULATES.
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATE IN AN INDUSTRIAL/COMMERCIAL FACILITY
IN PRESENCE OF A COMBUSTIBLE MATERIAL. DISPOSE OF COMPLETELY
CURED(POLYMERIZED) MATERIAL IN A SANITARY LANDFILL IAW/FEDERAL,
STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|