===================== Product Identification =====================
MSDS NAME:JET-WELD TE-030 THERMOSET ADHESIVE
NIIN:00F040023
MSDS Number: BXKVN
=== Responsible Party ===
Company:MINNESOTA MINING INDUSTRIAL TAPE & SPECIALTIES DIV
Address:3M CENTER
City:ST PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1110
Emergency Phone Num:612-733-1110
CAGE:76381
=== Contractor Identification ===
Company:MINNESOTA MINING & MFG CO INDUSTRIAL TAPE & SPECIALTIES
DIV
Address:3M CENTER
Box:City:ST PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:1-800-364-3577
CAGE:52152
Company:MINNESOTA MINING AND MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381
============= Composition/Information on Ingredients =============
Name:POLYURETHANE RESIN
CAS:31075-20-4
Fraction by Wt: 95-100%
Name:DIPHENYLMETHANEDIISOCYANATE (MDI), METHYLENE BIS
(PHENYLISOCYANATE), 4,4 DIPHENYLMETHANE DIISOCYANATE (MDI)
CAS:101-68-8
RTECS #:NQ9350000
Fraction by Wt: 1-5%
Other REC Limits:0.005 PPM
OSHA PEL:0.02 PPM
ACGIH TLV:0.051 MG/CUM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: ALLERGIC
REACTION, BURNS, MILD IRRITATION. INHALATION: ALLERGIC REACTION,
RESPIRATORY FAILURE, UPPER RESPIRATORY, IRRITATION. INGESTION: GI
TISSUE IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, REDNESS, SWELLING, BLISTERING,
ITCHING, BURNING PAIN, RED & SWOLLEN SKIN, WHEEZING, NOSE/THROAT
SORENESS, COUGHING, SNEEZING, PAIN, VOMITING, ABDOMINAL TENDERNESS,
NAUSEA, BLOOD IN VOMITUS , BLOOD IN FECES. DIFFICULTY
BREATHING,TIGHTNESS OF CHEST.
======================= First Aid Measures =======================
Eyes: IMMEDIATELY FLUSH W/LARGE AMOUNTS OF WATER. SKIN:
IMMEDIATELY FLUSH W/LARGE AMOUNTS OF WATER & COVER W/CLEAN
DRESSING. DON'T ATTEMPT TO REMOVE ADHESIVE. HAVE BURN TREATED.
INHALATION: REMOVE TO FRESH AIR. GIVE CPR IF NEEDED. INGESTION:
DON'T INDUCE VOMITING. DRINK 2 GLASSES OF WATER. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point:>390F
Extinguishing Media:WATER, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING, INCLUDING
HELMET/SELF CONTAINED POSITIVE PRESSURE/PRESSURE DEMAND BREATHING
APPARATUS/BUNKER COAT & PANTS. (SEE SUPP)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HEAT FROM
FIRE MAY BUILD PRESSURE & EXPLODE.
================== Accidental Release Measures ==================
Spill Release Procedures:COVER W/WATER. COLLECT MATERIAL. PLACE IN A U
S DOT-APPROVED CONTAINER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AT ROOM TEMP. KEEP CONTAINER
CLOSED WHEN NOT IN USE. KEEP CONTAINER TIGHTLY CLOSED. FOR
INDUSTRIAL/PROFESSIONAL USE ONLY.
Other Precautions:DON'T EXPOSE TO TEMP >275F. KEEP OUT THE REACH OF
CHILDREN. AVOID EYE CONTACT. AVOID SKIN CONTACT W/HOT ADHESIVE &
APPLICATOR TIP. AVOID PROLONGED BREATHING VAPORS. DON'T INGEST.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH APPROVED HALF-MASK SUPPLIED AIR
RESPIRATOR.
Ventilation:CONDUCT AIR MONITORING TO DETERMINE ADEQUACY.
Protective Gloves:REQUIRED.
Eye Protection:VENTED GOGGLES
Supplemental Safety and Health
SPECIAL FIRE CONT'D: BANDS AROUND ARMS/WAIST & LEGS/FACE MASK &
PROTECTIVE COVERING FOR EXPOSED AREAS OF THE HEAD.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:302F
Vapor Pres:0.0003
Vapor Density:8.6
Spec Gravity:1.04
Solubility in Water:REACTS
Appearance and Odor:WHITE/OFF-WHITE SOLID W/MILD ODOR.
Percent Volatiles by Volume:0/WT
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AMINES/ALCOHOLS/WATER.
Stability Condition to Avoid:TEMP >275F.
Hazardous Decomposition Products:CO, CO2, HYDROGEN CYANIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF COMPLETELY ABSORBED WASTE PRODUCT IN
A FACILITY PERMITTED TO ACCEPT CHEMICAL WASTES IAW/FEDERAL, STATE &
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|