===================== Product Identification =====================
MSDS NAME:5356 ALUMINUM WELDING ALLOYS
NIIN:00-221-9390
MSDS Number: BXQCZ
=== Responsible Party ===
Company:ALL-STATE WELDING PRODUCTS DIVISION
Address:5112 ALLENDALE ST
Box:600
City:TANEYTOWN
State:MD
ZIP:21787
Country:US
Info Phone Num:410-756-4330 OR 800-638-1647
Emergency Phone Num:717-637-8911(CHEMTREC 800-424-9300)
CAGE:69482
=== Contractor Identification ===
Company:ALL-STATE PRODUCTS/ DIV OF ESAB GROUP,INC
Address:5112 ALLENDALE ST
Box:600
City:TANEYTOWN
State:MD
ZIP:21787
Country:US
Phone:1-410-756-4330
CAGE:69482
============= Composition/Information on Ingredients =============
Name:COPPER (SARA 313) (CERCLA)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 0.1%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2 MG/M3 FUME; 9495
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:CHROMIUM (SARA 313) (CERCLA)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: <0.2%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3; 9495
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: 0.4%
Other REC Limits:NONE RECOMMENDED
Name:MAGNESIUM
CAS:7439-95-4
RTECS #:OM2100000
Fraction by Wt: 4.5-5.5%
Other REC Limits:NONE RECOMMENDED
Name:MANGANESE (SARA 313)
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: <0.2%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:C 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9495
Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: 0.25%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9495
Name:TITANIUM
CAS:7440-32-6
RTECS #:XR1700000
Fraction by Wt: <0.2%
Other REC Limits:NONE RECOMMENDED
Name:ZINC (SARA 313) (CERCLA)
CAS:7440-66-6
RTECS #:ZG8600000
Fraction by Wt: 0.1%
Other REC Limits:NONE RECOMMENDED
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:ALUMINUM (SARA 313)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: BALANCE
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MG/M3 DUST
ACGIH TLV:10 MG/M3 DUST; 9495
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EXPOSURE TO DUSTS, FUMES, GASES
FROM WELDING MAY CAUSE LUNG, NOSE, THROAT & EYE IRRITATION;
PULMONARY EDEMA, ASPHYXIATION OR DEATH. CHRONIC: PROLONGED OR
REPEATED EXPOSURE TO WELDING FUMES, GAS ES, DUSTS MAY CAUSE REDUCED
LUNG FUNCTION OR DISEASE; MAY CAUSE RESPIRATORY IRRITATION, CANCER
(FROM CHROMIUM).
Explanation of Carcinogenicity:IARC AND NTP LIST CHROMIUM AS A
CARCINOGEN.
Effects of Overexposure:WATERY EYES, NOSE & THROAT IRRITATION,
HEADACHE, DIZZINESS, DIFFICULTY IN BREATHING, FREQUENT COUGHING,
CHEST PAIN, LANQUOR, SLEEPINESS, MUSCULAR WEAKNESS, EMOTIONAL
DISTURBANCES AND SPASTIC GAIT.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH ALLERGIES OR
IMPAIRED RESPIRATORY FUNCTION MAY HAVE SYMPTOMS WORSENED BY
EXPOSURE TO WELDING FUMES.
======================= First Aid Measures =======================
First Aid:IN CASE OF EMERGENCY, CALL FOR MEDICAL ASSISTANCE. EMPLOY
FIRST AID TECHNIQUES RECOMMENDED BY RED CROSS. GIVE OXYGEN IF
BREATHING DIFFICULT. FOR ELECTRICAL SHOCK; TURN-OFF ELECTRICAL
POWER. GIVE ARTIF ICIAL RESPIRATION IF BREATHING STOPPED.IF NO
PULSE, BEGIN CPR. IMMEDIATELY CALL FOR MEDICAL ASSISTANCE. FOR ARC
BURN; APPLY COLD, CLEAN COMPRESSES AND CALL FOR MEDICAL ASSISTANCE.
===================== Fire Fighting Measures =====================
Flash Point:NON-FLAMMABLE
Extinguishing Media:USE MEDIA APPROPRIATE FOR SURROUNDING FIRE. PRODUCT
WILL NOT BURN BUT, SPARKS FROM WELDING CAN IGNITE COMBUSTIBLES.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:DAMP ALUMINUM DUST MAY SPONTANEOOUSLY
HEAT & LIBERATE HYDROGEN GAS TO FORM EXPLOSIVE AIR MIXTURES.DO NOT
USE WATER OR HALOGEN ON DUST FIRES-USE DRY POWDER/SAND.
================== Accidental Release Measures ==================
Spill Release Procedures:SWEEP OR PICK-UP SPILLED MATERIALS AND PLACE
IN A CONTAINER FOR REUSE OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:NO SPECIAL STORAGE RECOMMENDATIONS.
WEAR PROPER PROTECTIVE CLOTHING AS RECOMMENDED IN ANSI Z-49.1.
Other Precautions:TRAIN THE WELDER TO NOT TOUCH LIVE ELECTRICAL PARTS
AND TO INSULATE HIMSELF FROM WORK AND GROUND. ACIDS AND BASES IN
CONTACT WITH ALUMINUM MAY GENERATE EXPLOSIVE MIXTURES WITH
HYDROGEN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR AN EMERGENCY OCCURS; WEAR AN MSHA/NIOSH APPROVED RESPIRATOR OR
AN AIR-SUPPLIED RESPIRATOR OR SCBA, AS REQUIRED. USE IN ACCORDANCE
WITH 29 CFR 1910.13 4 AND MANUFACTURER'S RECOMMENDATIONS.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION OR LOCAL EXHAUST AT ARC
TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:WELDER'S GLOVES.
Eye Protection:WLEDERS LENSES ON GOGGLES & FACESHIELD
Other Protective Equipment:HARD HAT, DARK SUBSTANTIAL CLOTHES, ARM
PROTECTORS, APRONS, SHOULDER PROTECTION. PROTECTIVE SCREENS TO
SHIELD OTHERS.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
AWS SPEC A5.10-88 APPLYS. PRODUCT IS 3/32 DIAMETER-12.5 POUND SPOOL.
================== Physical/Chemical Properties ==================
HCC:N1
Appearance and Odor:METALLIC SILVER SOLID; NO ODORLESS.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
ANHYDROUS BROMINE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE EASILY
CLASSIFIED.COMPOSITION & QUANTITY OF BOTH DEPENDENT ON MATERIAL
BEING WELDED.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
==================== Disposal Considerations ====================
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
RAPID ZINC COATALYTE 313,103,PART A
| 12125-02-9
7664-93-9 |
|
RAPID ACTIVATOR 3,103,PART B
| 7664-38-2
62-56-6 |
|
5356 ALUMINUM WELDING ALLOYS
| 7440-50-8
7440-47-3
7439-89-6
7439-95-4
7439-96-5
7440-21-3
7440-32-6
7440-66-6
7429-90-5 |
|
HYDROCHLORIC ACID 20 BE, NPU 588227
| 7647-01-0
7732-18-5 |
|
NITRIC ACID
| 7697-37-2
7732-18-5 |
|
A-A50493
| |
|
SHELL VALVATA (R) J OIL 460
| 64742-54-7
64742-57-0
68513-81-1 |
|
SHELL CODE:83420 CYCLO SOL(R 53 AROMATIC SOLVENT
| 64742-95-6
1330-20-7
95-63-6
98-82-8 |
|
METHANOL
| 67-56-1 |
|
SODIUM HYDROXIDE
| 1310-73-2 |
|
POTASSIUM CHLORATE, PRODUCT NO:P3300, P3340, P3388.
| 3811-04-9 |
|
110 ALLOY RODS DUAL SHIELD MILD STEEL T-1 & T-2 FLUX CORED
| 7439-96-5
14808-60-7
7440-21-3
7439-89-6
13463-67-7 |
|
TINCTURE BENZOIN COMPOUND
| |
|
ALL DARCO LIGNITE BASED CARBON
| 7440-44-0 |
|
POTASSIUM DICHROMATE,INDUSTRIAL GRADE
| 7778-50-9 |
|
DRY CLEANING SOLVENT
| 64742-89-8 |
|
SODIUM HYDROXIDE
| 1310-73-2 |
|
CITRIC ACID, MONOHYDRATE
| 5949-29-1 |
|
SODIUM BICHROMATE CRYSTAL
| 10588-01-9
7732-18-5 |
|
GRAMOXONE EXTRA
| 4685-14-7 |
|
KRYLON 1306 WORKABLE FIXATIF
| 74-98-6
75-28-5
64742-89-8
64742-47-8
108-88-3
100-41-4
1330-20-7
67-64-1 |
|
TETRAETHYLENEPENTAMINE
| 112-57-2
112-24-3
4067-16-7 |
|
KRYLON 1303/1303A CRYSTAL CLEAR
| 74-98-6
75-28-5
64742-89-8
64742-47-8
108-88-3
100-41-4
1330-20-7
67-64-1 |
|
BTR-229
| |
|
BARSOL A-2688
| 64741-52-2
141-78-6
64-17-5
67-63-0
78-93-3
108-88-3 |
|
LUPERCO ATC,021
| 94-36-0
68952-35-2
7440-38-2 |
|
KODAK VERSAMAT 641 DEVELOPER STARTER, WORKING SOLUTION
| 7732-18-5
7757-83-7
6381-77-7
497-19-8
7758-02-3
92-43-3 |
|
655-777 PRENTOX 5 LB MALATHION SPRAY
| 121-75-5
64742-95-6
95-63-6
1330-20-7
98-82-8
100-41-4 |
|
SF96-50
| 63148-62-9 |
|
POTASH NITRATE,SALTPETER
| 7757-79-1 |
|
TOLUENE
| 108-88-3 |
|
CP-66 (11-519)
| 1317-33-5 |
|
DUB1-CHEK D10 DEVELOPER & D350 DEVELOPER (SPRAY CAN PKG
| 68476-85-7
67-63-0 |
|
HALOCARBON 56S OIL
| 9002-83-9 |
|
MOLECULAR SIEVE TYPE 13X
| 1313-59-3
112945-52-5
1344-28-1
1309-48-4 |
|
EPON(R) RESIN 828
| 25068-38-6 |
|
NICKEL CADMIUM SEALED CELL BATTERY
| 7440-43-9
21041-95-2
1306-19-0
7440-02-0
12054-48-7
1313-99-1
1310-58-3
7440-48-4 |
|
ROYCO 13E
| 63148-52-7
116-14-3 |
|
KRYLON 1303/1303A CRYSTAL CLEAR
| 74-98-6
75-28-5
64742-89-8
64742-47-8
108-88-3
100-41-4
1330-20-7
67-64-1 |
|
DIETHYLENETRIAMINE
| 111-40-0 |
|
KRYLON 1303/1303A CRYSTAL CLEAR
| 74-98-6
75-28-5
64742-89-8
64742-47-8
108-88-3
100-41-4
1330-20-7
67-64-1 |
|
ETHYLENE GLYCOL ANTIFREEZE
| 107-21-1
7732-18-5 |
|
116 2510, COLOR DEVELOPER, PROCESS E-6, WORKING SOLUTION
| 7732-18-5
7778-53-2
25646-71-3
7757-83-7
1310-58-3 |
|
ROYCO 634
| 57855-77-3 |
|
LEUCOVORIN CALCIUM INJECTION USP, 50 MG/VIAL
| 1492-18-8
7647-14-5 |
|
SANDVIK
| 7440-47-3
7440-50-8
7439-89-6
7439-96-5
7439-98-7
7440-02-0
7440-03-1
7440-32-6 |
|
FICAM 2; CR 4944
| 22781-23-3
9084-06-4
112945-52-5 |
|
MERCURIC OXIDE CELL,146-0015-00
| 1310-58-3
21908-53-2
7439-97-6
7440-66-6
1313-13-9 |
|
MOLECULAR SIEVE TYPE 13X
| 112945-52-5
1344-28-1
1313-59-3
1309-48-4 |
|
TT-P-1757 ZINC CHROMATE ALKYD PRIMER, PROD CODE:F-04P16
| 64742-95-6
108-65-6
13530-65-9
78-93-3
64742-89-8
61790-14-5 |
|
|