MSDS NAME:POLY (ETHYLENE GLYCOL), AVERAGE MN CA. 400, 20239-8
NIIN:00N060131
MSDS Number: BXSQR
=== Responsible Party ===
Company:ALDRICH CHEMICAL CO INC
Box:355
City:MILWAUKEE
State:WI
ZIP:53201
Country:US
Info Phone Num:414-273-3850
Emergency Phone Num:414-273-3850
CAGE:60928
=== Contractor Identification ===
Company:ALDRICH CHEMICAL CO INC
Address:1001 WEST ST PAUL AVE
Box:355
City:MILWAUKEE
State:WI
ZIP:53233
Country:US
Phone:414-273-3850
CAGE:60928
============= Composition/Information on Ingredients =============
LD50 LC50 Mixture:LD50(ORAL,RAT):30200 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MAY BE HARMFUL BY INHALATION,
INGESTION OR SKIN ABSORPTION. MAY CAUSE EYE IRRITATION. MAY CAUSE
SKIN IRRITATION. MATERIAL MAY BE IRRITATING TO MUCOUS MEMBRANES AND
UPPER RESPIRATORY TRACT. TO TH E BEST OF THE MANUFACTURER'S
KNOWLEDGE,THE CHEM, PHYSICAL & TOXICOLOGICAL PROPERTIES HAVE NOT
BEEN THORO INVESTIGATED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
Eyes:FLUSH IMMEDIATELY WITH COPIOUS AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES. SKIN:IMMEDIATELY WASH WITH SOAP AND COPIOUS
AMOUNTS OF WATER. REMOVE AND WASH CONTAMINATED CLOTHING PROMPTLY.
INHALATION:R EMOVE TO FRESH AIR. IF NOT BREATHING GIVE ARTIFICIAL
RESPIRATION. IF BREATHING IS DIFFICULT, GIVE OXYGEN. INGESTION:WASH
OUT MOUTH WITH WATER PROVIDED PERSON IS CONSCIOUS. CALL A
PHYSICIAN.
===================== Fire Fighting Measures =====================
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL POWDER OR
APPROPRIATE FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
Spill Release Procedures:WEAR NIOSH/MSHA APPRVD RESPIRATOR, CHEMICAL
SAFETY GOGGLES, RUBBER BOOTS AND HEAVY RUBBER GLOVES. SPILLED
MATERIAL SHOULD BE CAREFULLY WIPED UP OR MOISTENED WITH WATER AND
REMOVED. VENTILATE AREA AND WASH SPILL SITE AFTER MATERIAL PICKUP
IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID INHALATION. AVOID CONTACT WITH
EYES, SKIN AND CLOTHING. AVOID PROLONGED OR REPEATED EXPOSURE.
Other Precautions:KEEP TIGHTLY CLOSED. STORE IN A COOL, DRY PLACE.
STORE UNDER NITROGEN.
Waste Disposal Methods:DISSOLVE OR MIX THE MATERIAL WITH A COMBUSTIBLE
SOLVENT AND BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN
AFTERBURNER AND SCRUBBER. OBSERVE ALL FEDERAL, STATE AND LOCAL
ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.