===================== Product Identification =====================
MSDS NAME:POLYOUT PURGING COMPOUND
NIIN:00N072307
MSDS Number: CBXXZ
=== Responsible Party ===
Company:POLYMERLAND INC
Address:501 AVERY ST
City:PARKERSBURG
State:WV
ZIP:26101
Country:US
Info Phone Num:304-424-5402
Emergency Phone Num:800-447-4545
CAGE:0ZU21
=== Contractor Identification ===
Company:POLYMERLAND INC
Address:501 AVERY ST
Box:City:PARKERSBURG
State:WV
ZIP:26101
Country:US
Phone:304-424-5402
CAGE:0ZU21
============= Composition/Information on Ingredients =============
Name:TALC (POWDER), CONTAINING NO ASBESTOS FIBERS
CAS:14807-96-6
RTECS #:WW2710000
OSHA PEL:20 MPPCF
ACGIH TLV:2 MG/M3 RDUST
Name:SODIUM BORATE, DECAHYDRATE; (SODIUM BORATE, PENTAHYDRATE)
CAS:1303-96-4
RTECS #:VZ2275000
OSHA PEL:10 MG/M3
ACGIH TLV:5 MG/M3
Name:EFTS OF OVEREXP:INGEST. INHAL:SEV MUC MEMB IRRIT.
PRLNG/RPTD EXPOS TO TALC IN THIS PROD HAS BEEN SHOWN TO PRODUCE(ING
4)
RTECS #:9999999ZZ
Name:ING 3:TALC PNEUMOCONIOSIS.
RTECS #:9999999ZZ
Name:MED CNDTNS:PROCESSING FUMES OF RESINS BEING PURGED.
RTECS #:9999999ZZ
Name:FIRST AID PROC:CONDENSATE, IMMED WASH THORO W/SOAP & WATER.
IF IRRIT DEVELOPS, SEEK MED ATTN. INHAL:MOVE VICTIM (ING 7)
RTECS #:9999999ZZ
Name:ING 6:TO FRESH AIR. IF BRTHG BECOMES IMPAIRED, IMMED SEEK
MED ATTN. FOR PROCESSING FUME INHAL IRRIT FROM RESIN (ING 8)
RTECS #:9999999ZZ
Name:ING 7:BEING PURGED, LEAVE CONTAM AREA & BREATHE FRESH AIR.
IF COUGH, DFCLTY BRTHG/ANY OTHER SYMPS DEVELOP, SEEK (ING 9)
RTECS #:9999999ZZ
Name:ING 8:MEDICAL ATTENTION AT ONCE, EVEN IF SYMPTOMS DEVELOP
AT A LATER TIME.
RTECS #:9999999ZZ
Name:OTHER PREC:WHEN PURGING. DUST NOT EXPECTED TO CREATE EXPLO
HAZ. PROD IS NOT FLAMM. FUMES PRDCD WHEN PURGING (ING 11)
RTECS #:9999999ZZ
Name:ING 10:RESIN PROCESSING EQUIPMENT W/THIS MATERIAL MAY CAUSE
EYE, SKIN & RESPIRATORY TRACT IRRITATION.
RTECS #:9999999ZZ
Name:VENT:PROCESSING FUME CONDENSATE MAY BE FIRE HAZ & TOX;
REMOVE PERIODICALLY FROM EXHST HOODS, DUCT WORK & OTHER (ING 13)
RTECS #:9999999ZZ
Name:ING 12:SURFS USING APPROP PERSONAL PROT. FOR PWDRS &
RESIDUAL DUSTS, REFER TO HNDLG & STOR SECTION. VENT (ING 14)
RTECS #:9999999ZZ
Name:ING 13:REQUIREMENTS MUST BE LOCALLY DETERMINED TO LIM EXPOS
TO PROCESSING FUMES IN WORKPLACE. DESIGN TECHNIQUES (ING 15)
RTECS #:9999999ZZ
Name:ING 14:& GUIDELINESS MAY BE FOUND IN PUBLICATIONS SUCH
AS:INDUS VENT; AVAIL FROM ACGIH, COMMITTEE ON INDUS VENT,(ING 16)
RTECS #:9999999ZZ
Name:ING 15:P.O. BOX 16153, LANSING, MI 48901.
RTECS #:9999999ZZ
Name:EYE PROT:& FULL LENGTH FACESHIELD .
RTECS #:9999999ZZ
Name:OTHER PROT EQUIP:LONG SLEEVES. USE APPROPRIATE CLOTHING TO
PREVENT ANY CONTACT W/PROCESSING FUME CONDENSATES.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:LD50:(ORAL,RAT) 1153 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE:PROD MAY CAUSE SEV IRRIT.
SKIN:PROD MAY CAUSE IRRIT. INGEST:NOT ACUTELY TOX. INHAL:MAY BE
IRRIT TO RESP TRACT. MELT PROCESSING HLTH EFTS:AT TEMPS OF
300F(149C) & ABOVE, THIS PROD GENERATES S TEAM (WATER VAP) WHICH
CAN CAUSE SEV BURNS. PROCESSING FUMES FROM RESIN BEING PURGED MAY
CAUSE IRRIT TO(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:EYES, SKIN & RESP TRACT & IN CASE OF
SEV OVEREXP, NAUS & HDCH. SEE MSDS RELATING TO RESIN BEING PURGED
FROM DETAILS. GREASE-LIKE PROCESSING FUME CONDENSATES ON
VERMICULITE DUCT WORK, MOLDS & OTHER SURFS CAN CAUSE IRRIT &
INJURY TOSKIN. TOX INFO:EYE/SKIN:SEV IRRIT. ORAL:SODIUM SILICATE IS
POIS BY (ING 3)
Medical Cond Aggravated by Exposure:THERE ARE NO KNOWN HUMAN HLTH EFTS
AGGRAVATED BY EXPOS TO THIS PROD. HOWEVER, CERTAIN SENSITIVE
INDIVIDUALS & INDIVIDUALS W/RESP IMPAIRMENTS MAY BE AFFECTED BY
EXPOS TO DUST/COMPONENTS IN (ING 5)
======================= First Aid Measures =======================
First Aid:INGEST:CALL MD IMMED . EYES:REMOVE CONT LENSES AT ONCE. IMMED
FLUSH WELL W/COPIOUS QTYS OF WATER/NORM SALINE FOR AT LST 20-30
MINS. SEEK MED ATTN. SKIN:WASH THORO W/SOAP & WATER. SEEK MED ATTN
I F RASH/BURN OCCURS. FOR MOLTEN PLASTIC CONT, COOL RAPIDLY W/WATER
& IMMED SEEK MED ATTN. DO NOT ATTEMPT REMOVAL OF PLASTIC W/OUT MED
ASSISTANCE. DO NOT USE SOLV FOR REMOVAL. FOR CONT W/FUME (ING 6)
===================== Fire Fighting Measures =====================
Extinguishing Media:THIS MATL IS NOT FLAMMABLE & WILL NOT SUPPORT
COMBUSTION. USE EXTINGUISHING MEDIA WHICH IS APPROP FOR SURROUNDING
FIRE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . THIS MATERIAL IS NOT FLAMMABLE & WILL NOT SUPPORT
COMBUSTION.
Unusual Fire/Explosion Hazard:THIS MATERIAL IS NOT FLAMMABLE. NOT
SENSITIVE TO MECHANICAL CONTACT. NOT EXPECTED TO BE SENSITIVE TO
STATIC DISCHARGE.
================== Accidental Release Measures ==================
Spill Release Procedures:SWEEP UP MATERIAL & PLACE IN PROPER CONTAINER
FOR DISPOSAL OR RECOVERY. NOT EXPECTED TO PRESENT ANY SIGNIFICANT
ECOLOGICAL PROBLEMS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:FOLLOW RECS ON LBL & IN TECHNICAL
LITERATURE. AVOID INHAL OF DUST & CONT W/SKIN & EYES. PROVIDE ADEQ
VENT. AVOID STOR NEAR FOODS TO PVNT FOOD CONTAM.
Other Precautions:NOT REACTIVE UNDER REC CNDTNS OF HNDLG, STOR,
PROCESSING & USE. CAUT! PLUGGED DIE/NOZZ HOLES IN MELT PROCESSING
EQUIP CAN CAUSE HIGH BACK PRESS WHICH COULD CAUSE HOT RESIN TO
SQUIRT OUT OF DIE/NOZZ. D O NOT STAND IN FRONT OF DIE/NOZZ(ING 10)
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WHEN PROCESSING FUMES ARE NOT ADQUATELY
CONTROLLED, USE NIOSH APPROVED RESPIRATOR FOR PROTECTION FROM
ORGANIC VAPORS & ACID GASES. WHEN DUST IS NOT ADEQUATELY
CONTROLLED, USE NIOSH APPROVED RESPIRATOR FOR PROTECTION FROM
DUST.
Ventilation:CONTINUOUS SUPPLY OF FRESH AIR TO WORKPLACE TOGETHER
W/REMOVAL OF PROCESSING FUMES THRU EXHST SYS IS REC. (ING 12)
Protective Gloves:WELL-INSULATED, CHEM RESIST GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(ING 17)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . WHEN PROCESSING PROD, WEAR LONG PANTS,(ING
18)
Work Hygienic Practices:USE GOOD INDUSTRIAL HYGIENE PRACTICES.
Supplemental Safety and Health
PH:10.4-11.3(1% IN WATER). % VOLAT:15-25(WATER). CNDTNS(STAB):PROD
LITERATURE. IN ORDER TO AVOID AUTO IGNIT/HAZ DECOMP OF HOT THICK
MASSES OF PLASTIC, PURGINGS SHOULD BE COLLECTED IN SM, FLAT
SHAPES/T HIN STRANDS TO ALLOW FOR RAPID COOLING & QUENCH IN WATER.
HAZ DECOMP PROD:IN PROCESSING FUMES OF RESIN BEING PURGED.
================== Physical/Chemical Properties ==================
Melt/Freeze Pt:M.P/F.P Text:1200F,649C
Spec Gravity:0.8-1 (H*2O=1)
pH:SUPDAT
Solubility in Water:PARTIAL
Appearance and Odor:SOLID, GRANULAR POWDER W/NO ODOR.
Percent Volatiles by Volume:SUPDAT
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:EXPOS TO TEMPS IN EXCESS OF 300F(149C)
WILL CAUSE RELS OF HOT WATER VAP. DO NOT EXCEED MELT TEMP RECS IN
RESIN (SUPDAT)
Hazardous Decomposition Products:PROCESSING FUMES EVOLVED AT REC
PROCESSING CNDTNS WILL CNTN WATER FROM THIS MATL & OTHER CMPDS
WHICH ARE PRESENT(SUPDAT)
==================== Disposal Considerations ====================
Waste Disposal Methods:PRODUCT IS NOT A RCRA HAZARDOUS WASTE. RECYCLING
IS RECOMMENDED. LANDFILL OR INCINERATE I/A/W FEDERAL, STATE & LOCAL
REQUIREMENTS. COLLECTED PROCESSING FUME CONDENSATES & INCINERATOR
ASH SHOULD BE TES TED TO DETERMINE WASTE CLASSIFICATION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|