===================== Product Identification =====================
MSDS NAME:AS9195018 HYSOL EA 901NA/B-1 PART B
NIIN:00-831-3403
Kit Part:Y
MSDS Number: CCGGL
=== Responsible Party ===
Company:DEXTER HYSOL AEROSPACE INC DIV OF DEXTER CORP THE
Address:2850 WILLOW PASS RD
Box:312
City:PITTSBURGH
State:CA
ZIP:94565-3299
Country:US
Info Phone Num:510-458-8000/202-483-7616
Emergency Phone Num:510-458-8000/202-483-7616
CAGE:33564
=== Contractor Identification ===
Company:DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Address:2850 WILLOW PASS ROAD
Box:312
City:BAY POINT
State:CA
ZIP:94565-3299
Country:US
Phone:202-483-7616
CAGE:33564
============= Composition/Information on Ingredients =============
Name:POLYAMIDE
Fraction by Wt: 60-100%
Name:DIETHYLENETRIAMINE, ETHYLENEDIAMINE, N-(2-AMINOETHYL);
BIS(2-AMINOETHYL)AMINE *96-3*
CAS:111-40-0
RTECS #:IE1225000
Fraction by Wt: 10-30%
Other REC Limits:4 MG/CUM
OSHA PEL:1 PPM
ACGIH TLV:1 PPM (SKIN)
Name:TRIETHYLENETETRAMINE, EPOXY HARDNER
CAS:112-24-3
RTECS #:YE6650000
Fraction by Wt: 3-7%
Name:ETHYLENE GLYCOL, GLYCOL *96-3*
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 3-7%
Other REC Limits:10 MG/CUM
OSHA PEL:50 PPM
ACGIH TLV:50 PPM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:VOLATILE ORGANIC CONTENT: <10 G/L (ESTIMATE)
RTECS #:9999999VO
===================== Hazards Identification =====================
LD50 LC50 Mixture:ORAL LD50(RAT): 4700 MG/KG (SEE SUPP)
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: CORROSIVE, IRRITATION, MAY CAUSE
CHEMICAL BURNS & POSSIBLE ALLERGIC SENSITIZATION. EYES: CORROSIVE,
IRRITATION & CHEMICAL BURNS. INHALATION: NOSE & THROAT IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, DISCOMFORT, BURNS.
Medical Cond Aggravated by Exposure:SKIN SENSITIZATION.
======================= First Aid Measures =======================
Eyes: FLUSH W/WATER FOR 15 MINS. SKIN: WASH THOROUGHLY W/SOAP
& WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: DRINK PLENTY
OF WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Extinguishing Media:DRY CHEMICAL/HALON FIRE EXTINGUISHER, WATER SPRAY,
FOAM/FOG.
Fire Fighting Procedures:WEAR SCBA & FULL PROTECTIVE CLOTHING SUCH AS
TURN-OUT GEAR. CARTRIDGE RESPIRATORS DON'T PROVIDE ADEQUATE
PROTECTION FOR FIRE FIGHTERS/EXOTHERM MITIGATION.
Unusual Fire/Explosion Hazard:MAY LIBERATE LARGE QUANTITIES OF DENSE
FOUL-SMELLING SMOKE WHICH MAY CONTAIN UNIDENTIFIED TOXIC GASES.
================== Accidental Release Measures ==================
Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES & SAFETY
GLASSES. SCRAPE UP/SHOVEL INTO DOT APPROVED WASTE CONTAINERS.
====================== Handling and Storage ======================
Handling and Storage Precautions:REFRIGERATED STORAGE IS RECOMMENDED TO
MAINTAIN PRODUCT QUALITY. STORE AT 0F FOR UP TO 12 MONTHS. FOLLOW
CURING SCHEDULE AS RECOMMENDED.
Other Precautions:DON'T CUT, GRIND, WELD/DRILL ON/NEAR CONTAINER. AVOID
BREATHING VAPORS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:UNNECESSARY W/ADEQUATE EXHAUST VENTILATION.
Ventilation:LOCAL EXHAUST AT POINT OF USE.
Protective Gloves:BUTYL RUBBER/POLY VINYL CHLORIDE
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:NITRILE RUBBER, CHEMICAL GOGGLES, EYEWASH &
SAFETY SHOWER.
Work Hygienic Practices:WASH AFTER HANDLING.
Supplemental Safety and Health
AVOID MIXING RESIN(PART A)& CURING AGENT(PART B)IN BATCHES GREATER THAN
1 POUND. DON'T HEAT MIXED ADHESIVE >125F UNLESS CURING SURFACES TO
BE BONDED. FAILURE TO OBSERVE MAY RESULT IN EXCESSIVE HEAT BU ILD
UP CAUSING AN EXOTHERM. EXOTHERM RELEASES TOXIC GASES. THE ORAL
LD50 INFORMATION IS FOR ETHYLENE GLYCOL.
================== Physical/Chemical Properties ==================
Spec Gravity:0.96
Solubility in Water:SLIGHT
Appearance and Odor:AMBER LIQUID W/AMMONIACAL ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS/MINERAL ACIDS.
Stability Condition to Avoid:(SEE SUPP)
Hazardous Decomposition Products:CO, NITROGEN OXIDES, ALDEHYDES, ACIDS
& UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:(SEE SUPP)
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE/INCINERATE IN AN EPA APPROVED WASTE
INCINERATOR IAW/FEDERAL, STATE & LOCAL REGULATIONS. AMINES, LIQUID,
CORROSIVE UN2735.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|