===================== Product Identification =====================
MSDS NAME:R-60 MILD AND LOW ALLOY STEEL WELDING WIRES
NIIN:00-246-0569
MSDS Number: CCMPS
=== Responsible Party ===
Company:INWELD MFG CORP
Address:2301 DUSS AVE
City:AMBRIDGE
State:PA
ZIP:15003-0460
Country:US
Info Phone Num:800-346-5368, FAX:201-545-3831
Emergency Phone Num:412-251-9100
CAGE:66376
=== Contractor Identification ===
Company:INWELD MFG CORP
Address:3962 PORTLAND ST
Box:40
City:COPLAY
State:PA
ZIP:18037-0040
Country:US
Phone:610-261-1900
CAGE:66376
============= Composition/Information on Ingredients =============
Name:IRON OXIDE
CAS:1309-38-2
RTECS #:OM4800000
Other REC Limits:TLV 5 MG/M3 (MFR)
Name:MANGANESE (SARA 313)
CAS:7439-96-5
RTECS #:OO9275000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:C, 5 MG/M3 (FUME)
ACGIH TLV:0.2 MG/M3; 9596
Name:SILICA GEL
CAS:112945-52-5
RTECS #:VV7310000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3
Name:MOLYBDENUM
CAS:7439-98-7
RTECS #:QA4680000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:10 PPM.
ACGIH TLV:10 PPM.
Name:ALUMINUM (SARA 313)
CAS:7429-90-5
RTECS #:BD0330000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MG/M3 DUST
ACGIH TLV:10 MG/M3 DUST; 9596
Name:COPPER (SARA 313) (CERCLA)
CAS:7440-50-8
RTECS #:GL5325000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2 MG/M3 FUME; 9596
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
===================== Hazards Identification =====================
LD50 LC50 Mixture:PRODUCT'S LD50 (ORAL RAT) WAS NOT STATED
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SHORT TERM EXPOSURE TO WELDING FUMES
MAY RESULT IN DISCOMFORT. LONG TERM EXPOSURE MAY LEAD TO SIDEROSIS
(FROM IRON DEPOSITS IN THE LUNGS) AND IS BELEVED BY SOME
INVESTIGATORS TO AFFECT PULMONARY FUNCT IONS. ARC RAYS CAN INJURE
EYES & BURN SKIN. ELECTRIC SHOCK CAN KILL.
Explanation of Carcinogenicity:CONTAINS NICKEL & CHROMIUM. SEE THE
INDIVIDUAL IARC & NTP REPORTS FOR DETAILS OF CARCINOGENICITY.
Effects of Overexposure:EXPOSURE TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS DIZZINESS, NAUSEA, FEVER, DRYNESS AND/OR
IRRITATION OF NOSE, THROAT AND EYES.
Medical Cond Aggravated by Exposure:AGGRAVATION OF PRE-EXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.
======================= First Aid Measures =======================
First Aid:CALL FOR MEDICAL AID. EMPLOY FIRST AID TECHNIQUES RECOMMENDED
BY THE AMERICAN RED CROSS.
===================== Fire Fighting Measures =====================
Flash Point:NON FLAMMABLE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:NONFLAMMABLE. USE EXTINGUISHING MEDIA SUITABLE FOR
SURROUNDING FIRE.
Fire Fighting Procedures:NONFLAMMABLE. USE STANDARD FIREFIGHTING
PROCEDURES FOR SURROUNDING MATERIALS IN THE FIRE.
Unusual Fire/Explosion Hazard:WELDING ARC AND SPARKS CAN IGNITE
COMBUSTIBLES. SEE Z-49.1
================== Accidental Release Measures ==================
Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE RESPIRABLE FUMES RESPIRATOR OR AIR SUPPLIED
RESPIRATORS WHEN WELDING IN CONFINED SPACES OR WHERE LOCAL EXHAUST
OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENTILATION WHEN CUTTING, GRINDING OR WELDING TO
KEEP THE DUST, FUMES & GASES FROM THE WORKERS BREATHING ZONE
Protective Gloves:WELDERS LEATHER GLOVES
Eye Protection:OSHA APPROVED GOGGLES/FACE SHIELD W/LENS
Other Protective Equipment:WEAR HEAD, HAND AND BODY PROTECTION WHICH
WILL HELP TO PROTECT THE WORKERS FROM INJURY, RADIATION, SPARKS, &
SHOCK.
Work Hygienic Practices:TRAIN TE WELDERS NOT TO TOUCH LIVE ELECTRICAL
PARTS AND TO INSULATE HIMSELF FROM WORK AND GROUND.
Supplemental Safety and Health
REASONABLY EXPECTED FUME CONSTITUENTS FROM THESE PRODUCTS WOULD
INCLUDE: COMPLEX OXIDES OF IRON, MANGANESE, SILICON, COPPER.
GASEOUS REACTION PRODUCTS MAY INCLUDE CARBON MONOXIDE AND CARBON
DIOXIDE. O ZONE AND NITROGEN OXIDES MAY BE FORMED BY RADIATION FROM
THE ARC.
================== Physical/Chemical Properties ==================
HCC:N1
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Decomp Temp:Decomp Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:NOT GIVEN
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:NOT GIVEN
Appearance and Odor:THESE PRODUCTS AS SHIPPED ARE NOT HAZARDOUS,
FLAMMABLE, EXPLOSIVE OR REACTIVE.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THE COMPOSITION OF WELDING FUMES
DEPEND ON THE COMPOSITION OF THE ELECTRODE, THE WELDED METAL & THE
CONDITIONS OF USE.
==================== Disposal Considerations ====================
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER, OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER IN FULL COMPLIANCE
WITH FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|