=====================  Product Identification  =====================

MSDS NAME:EPON (R) RESIN 826
NIIN:00-144-9658
MSDS Number: CCMNX
=== Responsible Party ===
Company:SHELL OIL COMPANY
Address:1 SHELL PLAZA
Box:2463
City:HOUSTON
State:TX
ZIP:77001
Country:US
Info Phone Num:713-241-4819
Emergency Phone Num:713-473-9461 (24 HOUR EMERGENCY)
CAGE:54527
=== Contractor Identification ===
Company:PTI TECHNOLOGIES INC SUB OF HR TEXTRON INC
Box:UNKNOW
City:NEWBURY PARK
State:CA
ZIP:91319
Country:US
CAGE:1FD29
Company:SHELL OIL COMPANY
Address:Box:2463
City:HOUSTON
State:TX
ZIP:77210
Country:US
Phone:800-231-6950
CAGE:54527

=============  Composition/Information on Ingredients  =============

Name:BISPHENOL A/EPICHLOROHYDRIN BASED EPOXY RESIN NOTE:
    RESIDUAL LEVELS OF EPICHLOROHYDRIN CONTROLED TO 1 PPM MAX IN PROD.
CAS:25068-38-6
RTECS #:SL6475000
Fraction by Wt: 100.0%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50:11.4 G/KG-RAT;15.6 G/KG-MOUSE*
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE: MODERATELY IRRITATING TO THE
    EYES. CONTACT W/PRODUCT AT ELEVATED TEMPERATURES CAN RESULT IN
    THERMAL BURNS. SKIN: MODERATELY IRRITATING TO THE SKIN. PRODUCT MAY
    CAUSE SKIN SENSITIZATION. CONTACT W /PRODUCT AT ELEVATED
    TEMPERATURES CAN RESULT IN THERMAL BURNS. INHAL: BECAUSE OF ITS LOW
    VOLATILITY THIS PROD **
Explanation of Carcinogenicity:NK *DERMAL LD50: >20 ML/KG-RABBIT.
Effects of Overexposure:IS NOT LIKELY TO BE AN INHALATION HAZARD.
    INGESTION: BASED ON PRODUCT TESTING, PRODUCT IS CONSIDERED TO HAVE
    A LOW ORDER OF ACUTE ORAL TOXICITY. SKIN: SENSITIZATION (ALLERGY)
    MAY BE EVIDENCED BY RASHE S, ESPECIALLY HIVES.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN AND EYE DISORDERS
    MAY BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT. PRE-EXISTING SKIN OR
    LUNG ALLERGIES MAY INCREASE THE CHANCE OF DEVELOPING INCREASED
    ALLERGY SYMPTOMS FROM EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH W/WATER-15 MIN, HOLD EYELIDS OPEN. SKIN: REMOVE
    CONTAM CLOTH/SHOES & WIPE EXCESS FROM SKIN. FLUSH W/WATER. WASH
    W/SOAP/WATER. CAREFULLY REMOVE CLOTH; IF CLOTH IS STUCK TO BURN
    AREA, DO NOT  PULL OFF/CUT AROUND IT. COVER AREA W/CLEAN MAT'L. GET
    MED AID IMMED. INHAL:GET FRESH AIR. GIVE OXYGEN IF BREATHING IS
    DIFFICULT. GETMED AID. INGEST: DO NOT INDUCE VOMITING. IN GEN NO
    TREATMENT IS ***

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:480F,249C
Lower Limits:NOT AVAIL
Upper Limits:NOT AVAIL
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL OR CO2.
Fire Fighting Procedures:WILL NOT BURN UNLESS PREHEATED. DO NOT ENTER
    CONFINED FIRE SPACE W/O FULL BUNKER GEAR, INCLUDING POS PRESS NIOSH
    APPR'D SCBA. COOL FIRE EXPOSED CNTNRS W/WATER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:LG SPILL: WEAR RESPIRATOR & APPROP PROTECT
    CLOTH. SHUT OFF LEAK SOURCE IF SAFE TO DO. DIKE/CONTAIN. REMOVE
    W/VACUUM TRUCKS OR PUMP TO STORAGE/SALVAGE VESSELS. SOAK UP
    W/ABSORB. FLUSH AREA W/WATER. SM  SPILL: TAKE UP W/ABSORB MAT'L &
    PROPERLY DISPOSE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY PLACE. KEEP FROM
    OPEN FLAME/HIGH TEMPS. CONTAINERS (EVEN EMPTY) CONTAIN RESIDUE.
    HANDLE PER HAZARD POTENTIAL OF CURING AGENT USED.
Other Precautions:HEATING THIS RESIN ABOVE 300F IN THE PRESENCE OF AIR
    MAY CAUSE SLOW OXIDATIVE DECOMPOSITION ABOVE 500F, POLYMERIZATION
    MAY OCCUR. DO NOT BREATH FUMES. AVOID CONTACT W/EYES & PROLONGED OR
    REPEATED CONT ACT W/SKIN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE A NIOSH-APPROVED RESPIRATOR AS REQUIRED TO
    PREVENT OVEREXPOSURE. NOT ORDINARILY REQUIRED.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:WEAR SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:AS REQUIRED TO MINIMIZE CONTACT.
Work Hygienic Practices:WASH WITH SOAP AND WATER BEFORE EATING,
    DRINKING, SMOKING, APPLYING COSMETICS OR USING TOILET FACILITIES.
Supplemental Safety and Health
LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. CONTAMINATED LEATHER
    ARTICLES, EVEN SHOES, CANNOT BE DECONTAMINATED & SHOULD BE
    DESTROYED TO PREVENT REUSE. MAY CAUSE IRRITATION. IN GENERAL, NO
    TREATMENT N ECESSARY UNLESS LARGE AMOUNTS OF PRODUCT ARE INGESTED.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>500F,>260C
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:0.03 @ 77C
Vapor Density:NA
Spec Gravity:1.17
Evaporation Rate & Reference:NA
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VERY LIGHT YELLOW, VERY VISCOUS LIQUID.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXID AGENTS, STRONG LEWIS/MNRL ACIDS & STRONG MNRL & ORGANIC
    BASES/ESPECIALLY PRIMARY/SECONDARY ALIPHATIC AMINES.
Stability Condition to Avoid:REACTS W/SOME CURING AGENTS. RUN-A-WAY
    CURE REACTIONS MAY CHAR/DECOMPOSE RESIN SYSTEM, GENERATING TOXIC
    FUMES/VAPORS.
Hazardous Decomposition Products:CARBON MONOXIDE, ALDEHYDES, ACIDS &
    OTHER ORGANIC SUBSTANCES MAY BE FORMED DURING COMBUST OR ELEVATED
    TEMP DEGRADATION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***