=====================  Product Identification  =====================

MSDS NAME:MASTERPIECE HIGH GLOSS FLOOR FINISH, 09-D0400-000
NIIN:00N073869
MSDS Number: CCPWG
=== Responsible Party ===
Company:RECKITT & COLMAN INC
Address:225 SUMMIT AVE
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Info Phone Num:201-573-5700
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:0S780
=== Contractor Identification ===
Company:RECKITT & COLMAN INC
Box:City:WAYNE
State:NJ
ZIP:07474-0943
Country:US
Phone:201-633-6700
CAGE:0S780

=============  Composition/Information on Ingredients  =============

Name:DIETHYLENE GLYCOL MONOMETHYL ETHER
CAS:111-77-3
RTECS #:KL6125000
Fraction by Wt: 1.5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:DIPROPYLENE GLYCOL METHYL ETHER
CAS:34590-94-8
RTECS #:JM1575000
Fraction by Wt: 5.5%
OSHA PEL:S, 100 PPM
ACGIH TLV:S, 100 PPM/150 STEL

Name:ETHANOL, 2-BUTOXY-, PHOSPHATE (3:1); (TRIBUTOXYETHYL
    PHOSPHATE)
CAS:78-51-3
RTECS #:KJ9800000
Fraction by Wt: 1.38%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:ACRYLIC POLYMER EMULSION
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:STYRENE RESIN SOLUTION
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:POLYPROPYLENE MIXTURE; (POLYPROPYLENE EMULSION)
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN:WILL CAUSE IRRITATION. SOME
    OF THE INGREDIENTS IN THIS PRODUCT, IN THEIR PURE FORM, HAVE BEEN
    REPORTED TO CAUSE ADVERSE EFFECTS ON THE KIDNEY, LIVER & NERVOUS
    SYSTEM IN LABORATORY ANIMALS W HEN EXPOSED TO HIGH LEVELS. THESE
    EFFECTS ARE CONSIDERED TO HAVE NO RELEVANCE TO HUMAN EXPOSURE
    DURING (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:NORMAL USE OF THIS PRODUCT.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
    RESP) . SKIN:FLUSH THOROUGHLY WITH WATER. EYES:FLUSH THOROUGHLY
    WITH WATER FOR AT LEAST 15 MINUTES. INGEST:CONTACT PHYSICIAN. DRINK
    SE VERAL GLASSES OF WATER TO DILUTE THE INGESTED MATERIAL. DO NOT
    GIVE LIQUIDS TO AN UNCONSCIOUS PERSON.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON
    DIOXIDE, AS SUITABLE FOR THE SURROUNDING FIRE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SPILLS MAY BE FLUSHED TO SEWER WITH LARGE
    QUANTITIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:CAUTION:AVOID CONTACT WITH SKIN. KEEP
    OUT OF REACH OF CHILDREN. DO NOT POUR UNUSED PRODUCT BACK INTO
    ORIGINAL CONTAINER.
Other Precautions:KEEP FROM FREEZING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED. NIOSH APPROVED RESPIRATOR
    APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE REQUIRED.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Spec Gravity:1.032
pH:8.8
Evaporation Rate & Reference:<1 (BUTYL ACETATE =1)
Solubility in Water:MISCIBLE
Appearance and Odor:A THIN, OFF-WHITE LIQUID.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACIDS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:NONE KNOWN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***