=====================  Product Identification  =====================

MSDS NAME:09-D0318-00, MASTERPIECE CLEANER/SHINER (SUPDAT)
NIIN:00N073868
MSDS Number: CCPWF
=== Responsible Party ===
Company:RECKITT & COLMAN INC
Address:225 SUMMIT AVE
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Info Phone Num:201-573-5700
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:0S780
=== Contractor Identification ===
Company:RECKITT & COLMAN INC
Box:City:WAYNE
State:NJ
ZIP:07474-0943
Country:US
Phone:201-633-6700
CAGE:0S780

=============  Composition/Information on Ingredients  =============

Name:AMORPHOUS SILICA
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: 1-3%
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3

Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:LIGROINE; (ODORLESS MINERAL SPIRITS)
CAS:8032-32-4
RTECS #:OI6180000
OSHA PEL:300 PPM
ACGIH TLV:300 PPM

Name:STYRENE ACRYLIC EMULSION
CAS:68630-83-1
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:OXIDIZED POLYETHYLENE
CAS:68441-17-8
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:YES
Health Hazards Acute and Chronic:ACUTE:SKIN:PROLONGED AND/OR REPEATED
    CONTACT MAY CAUSE SKIN IRRITATION. EYES:AS IS THE CASE WITH ANY
    FOREIGN MATERIAL CONTACTING THE EYES, MILD, TEMPORARY IRRITATION
    MAY OCCUR. INGESTION:MAY BE HARMFU L IF SWALLOWED. CONTAINS
    PETROLEUM DISTILLATES. CHRONIC:NONE LISTED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
    RESP) . SKIN:WASH WITH PLENTY OF SOAP AND WATER. EYES:IMMED REMOVE
    CONTACT LENSES & RINSE EYES WITH PLENTY OF WATER FOR AT LEAST 15 MI
    NS. GET MED ATTN IF IRRIT PERSISTS. INGEST:DO NOT INDUCE VOMIT.
    THIS PROD CONTAINS PETROLEUM DISTILLATES. CALL PHYS IMMED. PROD
    VISCOSITY IS BETWEEN 10,000 & 30,000 CPS.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:130F,54C
Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON
    DIOXIDE, AS SUITABLE FOR THE SURROUNDING FIRE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:COMBUSTIBLE. CONTAINS PETROLEUM
    DISTILLATES. KEEP AWAY FROM HEAT AND OPEN FLAME.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SPILLED MATL SHOULD BE CONTAINED, COLLECTED &
    EVALUATED FOR DISPOSAL ACCORDING TO STATE AND FEDERAL HAZARDOUS
    WASTE REGULATIONS. UNDILUTED CONCENTRATED MATERIAL SHOULD NOT BE
    FLUSHED TO SEWER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:CAUTION:COMBUSTIBLE. CONTAINS
    PETROLEUM DISTILLATES. MAY BE HARMFUL IF SWALLOWED. AVOID CONTACT
    WITH SKIN.
Other Precautions:KEEP AWAY FROM HEAT, SPARK AND OPEN FLAME. KEEP OUT
    OF REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED. NIOSH APPROVED RESPIRATOR
    APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE REQUIRED.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR TRADE NAME/PART NO:FORMULA FOR WOOD FLOORS.

==================  Physical/Chemical Properties  ==================

Vapor Density:>1
Spec Gravity:0.913
pH:9.2
Evaporation Rate & Reference:<1 (BUTYL ACETATE =1)
Solubility in Water:MISCIBLE
Appearance and Odor:WHITE, CREAMY LIQUID WITH LEMON ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE, AND
    UNIDENTIFIED ORGANIC CMPDS MAY BE FORMED DURING INCOMPLETE
    COMBUSTION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***