===================== Product Identification =====================
MSDS NAME:359 CURING AGENT
NIIN:01-273-3839
MSDS Number: CDRVW
=== Responsible Party ===
Company:MAGNOLIA PLASTICS INC
Address:5547 PEACHTREE INDUSTRIAL BLVD
City:CHAMBLEE
State:GA
ZIP:30341-2234
Country:US
Info Phone Num:770-451-2777/800-457-4280
Emergency Phone Num:800-457-4280/770-451-2777
CAGE:22121
=== Contractor Identification ===
Company:MAGNOLIA PLASTICS INC
Address:5547 PEACHTREE INDUSTRIAL BLVD
Box:City:CHAMBLEE
State:GA
ZIP:30341-2234
Country:US
Phone:(770) 451-2777/(800) 457-4280
CAGE:22121
============= Composition/Information on Ingredients =============
Name:4,4,'-DIAMINODIPHENYLMETHANE, 4,4-METHYLENE DIANILINE (SUSP
HUMAN CARC BY ACGIH, IARC - GROUP 2B;SUSP CARC BY NTP)*96-4*
CAS:101-77-9
RTECS #:BY5425000
Fraction by Wt: 30-40%
Other REC Limits:0.1 PPM
ACGIH TLV:0.81 MG/CUM(SKIN) A2
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:N,N-DIETHYL-META-TOLUAMIDE, DETA, DIETHYLTOLUAMIDE, FLYPEL
*96-4*
CAS:134-62-3
RTECS #:XS3675000
Fraction by Wt: 10-15%
Name:PHENOL, HYDROXYBENZENE (IARC GROUP 3 ) *96-4*
CAS:108-95-2
RTECS #:SJ3325000
Fraction by Wt: 1-2%
Other REC Limits:5 MG/CUM
OSHA PEL:19 MG/CUM
ACGIH TLV:19 MG/CUM (SKIN)
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:AMINE
Fraction by Wt: 40-50%
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION/INGESTION: MAY CAUSE
RESPIRATORY TRACT IRRITATION; ABNORMAL LIVER & KIDNEY EFFECTS.
SKIN: IRRITATION, MAY CAUSE ALLERGIC REACTION. EYES: IRRITATION &
BURNS.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION, RASHES, STAINS, BURNS.
======================= First Aid Measures =======================
First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/WATER FOR 15 MINS.
INHALATION: REMOVE TO FRESH AIR, GIVE OXYGEN IF NEEDED. INGESTION:
INDUCE VOMITING BY GIVING 2 GLASSES OF WATER. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:>200F
Extinguishing Media:WATER SPRAY, FOAM, DRY CHEMICAL, CO2.
Fire Fighting Procedures:AVOID BREATHING SMOKE. IN CONFINED AREAS, USE
FULL FIRE FIGHTING EQUIPMENT & A NIOSH APPROVED SCBA. COOL FIRE
EXPOSED CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:CORROSIVE, CONTAINS 4'4-METHYLENE
DIANILINE.
================== Accidental Release Measures ==================
Spill Release Procedures:AVOID CONTACT W/LIQUIDS & VAPORS. WIPE W/A
CLOTH/COLLECT ON ABSORBENT MATERIAL. LARGE: DIKE & CONTAIN.
PUMP/SHOVEL INTO SALVAGE VESSELS.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL, DRY AREA IN TIGHTLY
CLOSED CONTAINERS. USE W/ADEQUATE VENTILATION. FOR INDUSTRIAL USE
ONLY.
Other Precautions:AVOID CONTACT W/SKIN & EYES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:FOR EXCESSIVE VAPORS/TO MAINTAIN BELOW TLV, USE
A NIOSH APPROVED RESPIRATOR FOR ORGANIC VAPORS.
Ventilation:LOCAL EXHAUST/MECHANICAL (GENERAL).
Protective Gloves:IMPERVIOUS RUBBER
Eye Protection:SPLASH-PROOF CHEMICAL GOGGLES
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS TO MINIMIZE
PERSONAL CONTACT. EYE WASH STATION, SAFETY SHOWER.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. USE GOOD HYGIENE PRACTICES.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:>225F
Vapor Pres:0
Vapor Density:>1
Spec Gravity:1.11
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BROWN LIQUID W/AMMONIACAL ODOR
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:ELEVATED TEMPERATURES.
Hazardous Decomposition Products:OXIDES OF CARBON & NITROGEN.
==================== Disposal Considerations ====================
Waste Disposal Methods:CURE W/EPOXY RESIN, THEN BURY/INCINERATE WHERE
PERMITTED IAW/FEDERAL, STATE & LOCAL REGULATIONS. CORROSIVE LIQUID,
UN 3267.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|