===================== Product Identification =====================
MSDS NAME:ADATOSIL 5000 SILICONE OIL
NIIN:01-430-2014
MSDS Number: CDRWS
=== Responsible Party ===
Company:ESCALON OPTHALMICS INC
Address:182 TAMARACK CIRCLE
City:SKILLMAN
State:NJ
ZIP:08558-5000
Country:US
Info Phone Num:800-488-4848/609-497-9141
Emergency Phone Num:609-497-9141/800-488-4848
CAGE:06DC9
=== Contractor Identification ===
Company:ESCALON OPTHALMICS INC
Address:182 TAMARACK CIRCLE
City:SKILLMAN
State:NJ
ZIP:08558-5000
Country:US
Phone:800-488-4848/609-497-9141
CAGE:06DC9
============= Composition/Information on Ingredients =============
Name:DIMETHYL POLYSILOXANE (MONOMER: DIMETHYL SILOXANE),
SILICONE FLUID, DOW CORNING 200, POLYMETHYLSILOXANE * 96-4 *
CAS:63148-62-9
RTECS #:JT6484500
===================== Hazards Identification =====================
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: SLIGHT IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION.
======================= First Aid Measures =======================
Eyes: FLUSH W/PLENTY OF WATER. SKIN: WASH W/PLENTY OF WATER.
INHALATION: REMOVE TO FRESH AIR. INGESTION: ALLOW VICTIM TO VOMIT
NATURALLY. OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point:608F
Extinguishing Media:WATER SPRAY JET, CO2, DRY SAND, DRY CHEMICAL/FOAM
TYPE EXTINGUISHING MEDIA.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING & SCBA.
Unusual Fire/Explosion Hazard:AUTOIGNITION TEMP: 842F.
================== Accidental Release Measures ==================
Spill Release Procedures:LEAK MAY CAUSE SKID DANGER. WARN FOLLOWING
VEHICLES. ABSORB E W/INERT MATERIAL. TAKE UP BY MECHANICAL MEANS.
PLACE IN AN APPROPRIATE CHEMICAL WASTE CONTAINER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINER CLOSED. KEEP IN A COOL
PLACE. KEEP IN A WELL VENTILATED PLACE. BE AWARE THAT MATERIAL IS
SLIPPERY.
Other Precautions:AVOID ELECTROSTATIC CHARGING. AVOID CONTACT W/EYES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:MECHANICAL (GENERAL): RECOMMENDED
Ventilation:ADEQUATE
Protective Gloves:NOT RECOMMENDED
Eye Protection:CHEMICAL SAFETY GOGGLES
Other Protective Equipment:NOT RECOMMENDED
Work Hygienic Practices:FOLLOW STANDARD INDUSTRIAL HYGIENE PRACTICES
WHEN USING THE MATERIAL.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Melt/Freeze Pt:M.P/F.P Text:-56.2F
Spec Gravity:0.96 TO 0.98
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS LIQUID
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS
Stability Condition to Avoid:HEAT, AMBIENT TEMPS, TEMPS >482F.
Hazardous Decomposition Products:COMBUSTION: SILICONE DIOXIDE, CO2, CO,
INCOMPLETELY BURNED HYDROCARBONS.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE/INCINERATE IAW/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD ***