=====================  Product Identification  =====================

MSDS NAME:AIRWEAVE N10
NIIN:01-337-2890
MSDS Number: CGDTS
=== Responsible Party ===
Company:AIRTECH INTERNATIONAL INC
Address:2542 E DEL AMO BLVD
City:CARSON
State:CA
ZIP:90749
Country:US
Info Phone Num:301-603-9683
Emergency Phone Num:301-603-9683
CAGE:53912
=== Contractor Identification ===
Company:AIRTECH INTERNATIONAL INC
Address:2542 E. DEL AMO BLVD
Box:City:CARSON
State:CA
ZIP:90749
Country:US
Phone:213-603-9683
CAGE:53912

=============  Composition/Information on Ingredients  =============

Name:POLY(OXYETHYLENEOXYTEREPHTHALOYL); (POLYETHYLENE
    TEREPHTHALATE POLYMER).  MP: 500F,260C.
CAS:25038-59-9
RTECS #:TR2725000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:SURFACE FINISHES
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:SUPDAT: EXPOSURE TO CHEMICAL SUBSTANCES MAY OCCUR AS A
    RESULT OF PROCESSING THESE FIBERS. PROCESSING MAY RELEASE (ING 4)
RTECS #:9999999ZZ

Name:ING 3: & AEROSOLIZE THE RESIDUAL MOISTURE & SURFACE
    FINISHES. HEATING THE FIBERS MAY VOLATILIZE THE RESIDUAL (ING 5)
RTECS #:9999999ZZ

Name:ING 4: MOISTURE & SURFACE FINISHES. HEATING THE FIBERS MAY
    VOLATILIZE THE FINISHES OR PRODUCE A CHEMICAL CHANGE. (ING 6)
RTECS #:9999999ZZ

Name:ING 5: THE MANUFACTURER RECOMMENDS A 3 MG/M3 8-HOUR TWA
    EXPOSURE LIMIT ON FINISH MISTS.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:RESULTS FROM TOXICITY STUDIES SUGGEST
    THAT THESE FIBERS WOULD POSE NO SIGNIFICANT HEALTH PROBLEMS UNDER
    NORMAL CONDITIONS OF HANDLING AND USE. IN SKIN TESTS ON HUMAN
    SUBJECTS, THE FIBERS PRODUCED NO I RRITATION OR SENSITIZATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR.
    SUPPORT BREATHING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) . EYES:
    IMMEDIATELY FLUSH W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK
     ASSISTANCE FROM MD . SKIN: FLUSHW/COPIOUS AMOUNTS OF WATER. CALL
    MD .

=====================  Fire Fighting Measures  =====================

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:PRODUCT WILL BURN IF EXPOSED TO FLAME.
    DECOMPOSITION PRODUCTS GENERATED FROM MOLTEN POLYMER MAY BE SUBJECT
    TO AUTOIGNITION. COMBUSTION PRODUCTS WILL BE (SUPDAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:THERE ARE NO KNOWN PHYSICAL OR HEALTH HAZS ASSOCIATED
    W/THIS PROD. THE POLYMER IMMOBILIZES THE CONSTITUENTS OF THE
    POLYMER SYSTEM (DELUSTERANTS, CATALYST RESIDUES, ETC) WHICH,
    THEREFORE, PRESENTS NO L IKELIHOOD OF EXPOSURE UNDER (SUPDAT)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:ADEQUATE VENTILATION IS RECOMMENDED TO MAINTAIN FINISH MIST
    LEVELS BELOW 3 MG/M3 8-HOUR TWA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:CUSTOMARY PERSONAL HYGIENE MEASURES, SUCH AS
    WASHING HANDS AFTER WORKING WITH SUCH FIBERS, ARE RECOMMENDED.
Supplemental Safety and Health
EXPLO HAZ: COMPRISED OF CARBON, HYDROGEN AND OXYGEN. THE EXACT
    COMPOSITION WILL DEPEND ON THE CONDITIONS OF COMBUSTION. WASTE DISP
    METH: BIOLOGICAL WASTEWATER TREATMENT SYSTEMS. THESE FIBERS ARE NOT
    C LASSIFIED BY DOT AS A HAZARDOUS MATERIAL. OTHER PRECS: NORMAL
    CONDITIONS OF PROCESSING & HANDLING. HOWEVER, (ING 3)

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:SEE ING 1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:POLYETHYLENE TEREPHTHALATE IS CHEMICALLY
    STABLE AND RESISTANT TO ATTACK BY OILS, SOLVENTS, WEAK ACIDS AND
    WEAK ALKALIS.
Hazardous Decomposition Products:COMBUSTION PRODS WILL BE COMPRISED OF
    CARBON, HYDROGEN & OXYGEN. EXACT COMPOSITION WILL DEPEND ON CNDTNS
    OF COMBUSTION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:THESE PRODUCTS ARE NOT CLASSIFIED AS HAZARDOUS
    WASTES UNDER RCRA & UNLESS PROHIBITED BY FEDERAL, STATE & LOCAL
    REGULATION, CAN BE DISPOSED OF IN A MUNICIPAL LANDFILL OR
    INCINERATED. ANY FINISH OILS CO NTAINED IN PLANT WASTE WATER SHOULD
    BE (SUPDAT)

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***