=====================  Product Identification  =====================

MSDS NAME:RHODORSIL FLUID 47V100 THROUGH 2500000
NIIN:00-292-9608
MSDS Number: CGDXL
=== Responsible Party ===
Company:RHONE-POULENC INC
Address:NORTH AMERICAN CHEMICALS ZONE,SILICONES
City:CRANBURRY
State:NJ
ZIP:08512-7500
Country:US
Info Phone Num:609-860-4000
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:0A5D1
=== Contractor Identification ===
Company:RHONE-POULENC INC
Address:125 BLACK HORSE LN
Box:125
City:MONMOUTH JUNCTION
State:NJ
ZIP:08852
Country:US
Phone:201-821-3586
CAGE:0A5D1
Company:SDB CONSULTANTS LTD
Address:401 WHITNEY AVE SUITE 120
Box:City:GRETNA
State:LA
ZIP:70056
Country:US
Phone:504-366-9105
CAGE:0PGK2

=============  Composition/Information on Ingredients  =============

Name:POLY (DIMETHYLSILOXANE)
CAS:63148-62-9
RTECS #:JJ6484500
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE:NON-IRRIT.MAY CAUSE FOREIGN BODY
    IRRIT ONLY.SKIN:NON-IRRIT.LOW ACUTE DERM TOXICITY.INHAL:NOT
    LIKELY.INGEST:LOW ACUTE ORAL TOXICITY.UNDER CERTAIN CONDITIONS THIS
    PROD MAY GENERATE FORMALDEHYDE AS B YPRODUCT OF OXIDATIVE THERMAL
    DECOMPOSTION.FORMALDEHYDE LISTED AS POT HUMAN CARC BY
    IARC/OSHA/ACGIH.
Explanation of Carcinogenicity:PER MSDS:PROD DOESNT CONTAIN ANY INGRED
    DESIGNATED BY IARC,NTP/ACGIH/OSHA AS PROBABLE OR SUSPECTED HUMAN
    CARCINOGENS.
Effects of Overexposure:CAUSES FOREIGN BODY IRRIT ONLT.
Medical Cond Aggravated by Exposure:NON SPECIFIC INFORMATION FOUND.

=======================  First Aid Measures  =======================

First Aid:EYE:IMMED ABSORB EXCESS W/CLEAN ABSORB CLOTH/COTTON.HOLD
    EYELIDS OPN,FLUSH W/STEADY GENTLY STREAM OF H2O FOR @LEAST
    15MINS.IRRIT DEVLP/PERSIST/VISUAL CHANGES OCCUR SEEK MED
    ATTN.SKIN:IMEMD WIPE EXCESS  OFF W/DRY CLOTH.WASH W/PLENTY OF
    SOAP/H2O.IRRIT DEVLP/PERSIST GET MED ATTN.INAHL:RESP IRRIT/DISTRESS
    OCCURS REMOVE TO FRESH AIR.IRRIT/DISTRESS CONTS SEEK MED
    ATTN.INGEST:CONSC/ALERT GIVE 1-2 (SUPPLE)

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>572F,>300C
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NO DATA
Upper Limits:NO DATA
Extinguishing Media:RECOMMENDED:DRY CHEMICAL, FOAM, CARBON DIOXIDE.
Fire Fighting Procedures:FIREFIGHTER SHOULD WEAR NIOSH/MSHA APPROV SCBA
    & FULL PROTECTIVE CLOTH.COOL CNTNR EXPO TO FIRE W/WATER.
Unusual Fire/Explosion Hazard:FLAMM CLASS:WILL BURN.PRODUCT WILL BURN
    UNDER FIRE CONDITIONS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR APPROP PROT GEAR FOR SITUATION.SEE PPE
    INFO.CAUT:MATL MAY MAKE FLOOR SLIPPERY.DONT LEAVE TRACES OF PROD ON
    FLOORS/LADDERS,ETC-SLIPPING HAZ.ABSORB W/INERT
    ABSORBT.SCRAPEUP/PLACE IN APPRO CLSD CNTN R.CLEANUP RESIDUE
    W/APPROP SOLVT-PAINT THINNER,
Neutralizing Agent:SPILL:MINERAL SPIRITS;PROVIDE GOOD VENTI/NO IGN
    SOURCES.DONT FLUSH TO DRAIN.

======================	Handling and Storage  ======================

Handling and Storage Precautions:MIN/MAX STORAGE
    TEMP:5-25C/41-77F.AVOID DIRECT/PROL SKIN/EYE CONTACT.STORE IN
    TIGHTLY CLSD CNTNR-MATL EPOXY COAT STEEL,ORD STEEL,POLYETHYLENE.
Other Precautions:PRODUCT CONTAINS DIMETHYLPOLYSILOXANE WHICH CAN
    GENERATE FORMALDEHYDE AS BYPRODUCT OF OXIDATION THERMAL DECOMPO
    BEGINNING @APPROX150C/300F.EXPO TO FORMALDEHYDE CAN CAUSE ADVERSE
    EFFECTS(SKIN/RESP SENS ,EYE/THROAT IRRIT)& POT CANC HAZ.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WHEN RESP REQUIRED SELECT NIOSH/MSHA APPROV
    EQPMT BASED ON ACTUAL/POT AIRBONRE CONE & IAW LATEST OSHA STD
    (29CFR1910.134) &/OR ANSI Z88.2 RECOMMENDATIONS.FOR REASONABLY
    FORESEEABLE INDUSTRIAL END USES  OF MATL RESP PROT SHOULDNT BE
    NECESSARY
Ventilation:WHERE ENGINEER CNTRL INDICATED BY USE CONDITIONS/POT FOR
    EXCESSIVE EXPO EXIST:GEN AREA DILUTION/EXHAUST VENTILATION.
Protective Gloves:GLOVES
Eye Protection:ANSI Z87 APPROV EQPMT FOR PARTICULAR USE
Other Protective Equipment:SUITABLE LONG-SLEEVED
    CLOTH(SHIRTS,PANTS).SKIN PROTECTION:CONSIDERATION MSUT BE GIVEN TO
    DURABILITY & PERM RESIST.
Work Hygienic Practices:ITS GEN REGARDED AS GOOD PRAC TO WEAR MIN SAF
    GLASSES W/SIDE SHIELDS WHEN WORK IN INDUSTR ENVIRO.WASH HAND/FC AFT
    HNDLG.
Supplemental Safety and Health
1STAID:GLASSES OF H2O TO DRINK.DONT GIVE ANYTHING BY MOUTH IF
    UNCONSC.SEEK MED ATTN.DONT LEAVE UNATTENDED.DR:ALL TREAT SHOULD BE
    BASED ON OBSERVED SIGNS/SYMPT OF DISTRESS IN VICTIM.CONSIDERATION
    SHOUL D BE GIVEN TO PROSSIBLITY THAT OVEREXPOTO MATLS OTHER THAN
    THIS PROD MAY HAVE OCCURED.TREAT SYMPT.NO SPEC ANTIDOTE AVAI

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:N/DATA AVAI
Melt/Freeze Pt:M.P/F.P Text:N/DATA AVAI
Decomp Temp:Decomp Text:NP
Vapor Pres:<0.01@200C
Vapor Density:N/DATA AVA
Spec Gravity:>0.96
pH:NA
Viscosity:NP
Evaporation Rate & Reference:NP
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR VISCOUS LIQUID, ODORLESS
Percent Volatiles by Volume:NP
Corrosion Rate:NP

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG BASES,STRONG ACIDS,STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, OPEN FLAME, SPARK.
Hazardous Decomposition Products:OXIDA/THERM:FORMALDEHYDE.OXIDES OF
    CARBON,SILICA-(CRYSTALLINE).THERMAL:DIEMTHYLCYCLOSILOXANES,METHYLPH
    ENYLCYCLOSILOXANES

====================  Disposal Considerations  ====================

Waste Disposal Methods:CHEM ADDN/PROCESS/ALTER MATL MAY MAKE WASTE
    MANAGEMENT INFO IN MSDS INCOMPLETE/INACCURATE/INAPPROPR.STATE/LOC
    REQMTS MAY BE MORE RESTRICTIVE/DIFF FRM FED LAW/REG.CONSULT
    STATE/LOC REGS FOR PROPER DISP O OF MATL.CNTNR/EQPMT SHOULD BE
    DECONTAM IMMED.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***