=====================  Product Identification  =====================

MSDS NAME:DRY CLEANING SOLVENT,P-D-680
NIIN:00-285-8012
MSDS Number: BDTSM
=== Responsible Party ===
Company:OCTAGON PROCESS INC.
Address:596 RIVER ROAD
City:EDGEWATER
State:NJ
ZIP:07020-1105
Country:US
Info Phone Num:201-945-9400
Emergency Phone Num:201-945-9400
CAGE:82925
=== Contractor Identification ===
Company:OCTAGON PROCESS INC.
Address:596 RIVER ROAD
Box:City:EDGEWATER
State:NJ
ZIP:07020
Country:US
Phone:201-945-9400
CAGE:82925

=============  Composition/Information on Ingredients  =============

Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 100%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293

=====================  Hazards Identification  =====================

Effects of Overexposure:ANESTHESIA,HEADACHE,NAUSEA,DIZZINESS,ETC.
    IRRITATING TO SKIN & EYES.

=======================  First Aid Measures  =======================

First Aid:INHAL-GET TO FRESH AIR. EYES-FLOOD W/WATER;SEEK MED ASSIST.
    SKIN-WASH W/MILD SOAP & WATER. INGEST-CALL DOC. REMOVE ALL CONTAM
    CLOTHING & WASH BEFORE REUSE.

=====================  Fire Fighting Measures  =====================

Flash Point:113F/45C/TCC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:FOAM,CARBON DIOXIDE,DRY CHEM,WATER-FOG,STEAM
Fire Fighting Procedures:DO NOT USE WATER. EXCLUDE AIR. CONSULT LOCAL
    FIRE MARSHALL
Unusual Fire/Explosion Hazard:HANDLE AS A COMBUSTIBLE MATL.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLUSH W/WATER INTO RETAINING AREA OR
    CONTAINER. AVOID SPARKS,FIRE OR HOT METAL. SML QTY MAY BE ABSORBED
    ONTO APPROPRIATE ABSORBENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL PLACE AWAY FROM SOURCES
    OF IGNITION. USE ONLY W/ADEQUATE VENT. AVOID PROLONGED OR REPEATED
    BREATH OF VAPORS & CONTACT.
Other Precautions:HANDLE AS A COMBUSTIBLE MATL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:ABOVE TLV-USE CARTRIDGE RESPIRATOR OR GAS MASK.
Ventilation:LOCAL EXH OR MECHAN W/APPRVD CLASS D EXPLOS-PROOF
    MOTOR,SWIT
Protective Gloves:IMPERMEABLE
Eye Protection:CHEM GOGGLES
Other Protective Equipment:APRON,SKIN BARRIER CREAM
Supplemental Safety and Health
P-D-680,TYPE I. MSDS NOT DTD.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:323F-390F
Vapor Pres:5
Vapor Density:4.8
Spec Gravity:0.786
Evaporation Rate & Reference:0.08(N-BUT ACET=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT COLORED LIQUID W/CHARAC HYDROCARBON ODOR
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATLS.
Stability Condition to Avoid:HIGH IGNIT SOURCES,OPEN FLAME,SPARKS,ETC.
Hazardous Decomposition Products:CARBON MONOXIDE & CARBON DIOXIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
    IAW LOCAL,STATE & FED. REGS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***