=====================  Product Identification  =====================

MSDS NAME:DURAGUARD 100 (PART A RESIN)
NIIN:00N083238
MSDS Number: CGPXR
=== Responsible Party ===
Company:SPRAY-CURE CO
Address:300 EDWARDS ST
City:MADISON
State:OH
ZIP:44057
Country:US
Info Phone Num:216-428-2105
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:GO212
=== Contractor Identification ===
Company:SPRAY-CURE CO
Address:300 EDWARDS ST
City:MADISON
State:OH
ZIP:44057
Country:US
Phone:216-428-2105
CAGE:GO212

=============  Composition/Information on Ingredients  =============

Name:BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (BISPHENOL-A EPOXY
    RESIN). LD50:(ORAL,RAT) 2 G/KG.
CAS:25068-38-6
RTECS #:SL6475000
Fraction by Wt: <70%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:9-OCTADECENDIC ACID 12-(OXIRANYLMETHOXY)-1,2,3-
    PROPANETRIYL ESTER, HOMOPOLYMER; (ALIPHATIC GLYCIDAL ETHER)
CAS:74398-71-3
Fraction by Wt: 25%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:SEE INGREDIENT 1.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE:IRRITANT. MAY CAUSE INJURY
    THAT PERSISTS FOR SEVERAL DAYS. CORROSIVE TO EYES. SKIN:SENSITIZER
    - MAY CAUSE ALLERGIC REACTION WHICH CAN BE SEVERE IN CERTAIN
    INDIVIDUALS. MODERATELY IRRITATING.  CAUSES CHEMICAL BURNS.
    INHALATION:HEATING CAN GENERATE VAPORS THAT MAY CAUSE HEADACHES,
    NAUSEA, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:DIZZINESS, AND RESPIRATORY IRRITATION.
    INGESTION:SLIGHTLY TOXIC.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SEEK MED ATTN IF SYMPTOMS PERSIST. EYES:IMMEDIATELY FLUSH
    W/PLENTY OF WATER FOR AT LEAST 15 MINUTES. GET MEDICAL ATTENTION.
    SKIN:FLUSH IMMEDIATELY W/PLENTY OF WATER FOR AT LEAST 15 MINUTES
    WHILE REMOV ING CONTAMINATED CLOTHING. INHAL:REMOVETO FRESH AIR. IF
    NOT BREATHING, GIVE ARTF RESP. IF BREATHING IS DIFFICULT, GIVE
    OXYGEN. GET MED ATTN. INGEST:IF APPRECIABLE QTYS ARE SWALLOWED,
    SEEK MED ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:DRY CHEMICALS, CO*2, HALON, WATER SPRAY OR FOAM.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . REMOVE ALL IGNITION SOURCES.
Unusual Fire/Explosion Hazard:HAZARDOUS COMBUSTION PRODUCTS: CARBON
    DIOXIDE &/OR CARBON MONOXIDE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB W/INERT MATERIAL, THEN PLACE IN
    CHEMICAL WASTE CONTAINER FOR LATER DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE W/ADEQUATE VENTILATION. AVOID
    CONTACT W/SKIN & EYES. KEEP CONTAINERS CLOSED & STORE IN A DRY,
    WELL VENTILATED AREA. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:SHELF LIFE OF PROPERLY STORED MATL IS ONE YR FROM
    DATE OF MANUFACTURE. CORROSIVE LIQ. DO NOT TAKE INTERNALLY. ALL
    LABEL PRECS & MSDS MUST BE FULLY UNDERSTOOD BEFORE USING THIS PROD.
    THIS PROD IS FORMU LATED & LABELED FOR INDUSTRIAL &(SUPDAT)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:MECHANICAL EXHAUST SHOULD BE USED.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA . PROTECTIVE CLOTHING.
Work Hygienic Practices:ALWAYS USE GOOD INDUSTRIAL HYGIENE PRACTICES &
    SAFETY GUIDELINES WHEN DEALING W/THIS POTENTIALLY HAZARDOUS
    PRODUCT.
Supplemental Safety and Health
WASTE DISP METH:THE TOXICITY CHARACTERISTIC (TC), HOWEVER, HAS NOT BEEN
    EVALUATED BY THE TOXICITY CHARACTERISTIC LEACHING PROCEDURE (TCLP).
    OTHER PREC:COMMERCIAL APPLICATION ONLY. EYE PROT:& FULL LENG TH
    FACESHIELD .

==================  Physical/Chemical Properties  ==================

Spec Gravity:1.12 (H*2O=1)
Solubility in Water:NEGLIGIBLE (<5%)
Appearance and Odor:CLEAR LIQUID; ODORLESS.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
CONTAMINATION W/STRONG ACIDS, BASES, AMINES & MERCAPTANS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
    MONOXIDE &/OR DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISP OF I/A/W ALL FED, STATE & LOC REGS. IF
    UNCERTAIN OF LOC REGS IN YOUR AREA, CONT PROPER ENVIRON AUTHS FOR
    DISP. THIS MATL DOES NOT MEET RCRA'S CHARACT DEFINITION OF
    IGNITABILITY, CORROSIVITY/REACT IVITY & IS NOT LISTED IN 40 CFR
    261.33.(SUPDAT)

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***