===================== Product Identification =====================
MSDS NAME:SATINGLIDE II MEDIUM BASE, 1280401
NIIN:00N085286
MSDS Number: CHBJW
=== Responsible Party ===
Company:FRAZEE INDUSTRIES INC
Address:6625 MIRAMAR RD
City:SAN DIEGO
State:CA
ZIP:92121
Country:US
Info Phone Num:619-275-9500
Emergency Phone Num:619-543-6000
Preparer's Name:ZEKE
CAGE:1GK99
=== Contractor Identification ===
Company:FRAZEE INDUSTRIES INC
Address:6625 MIRAMAR RD
City:SAN DIEGO
State:CA
ZIP:92121
Country:US
Phone:858-626-3600
CAGE:1GK99
============= Composition/Information on Ingredients =============
Name:PROPIONIC ACID,2-METHYL-,MONOESTER W/2,2,4-
TRIMETHYL-1,3-PENTANEDIOL;(2,2,4-3METHYL-1,3
PENTANED.1-ISOBUT.)VP:0.004@68F
CAS:25265-77-4
RTECS #:UF6000000
Fraction by Wt: 2%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:ETHYLENE GLYCOL (SARA 313) (CERCLA) VP: 0.06 @ 68F
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 2%
OSHA PEL:50 PPM (MFR)
ACGIH TLV:C 50 PPM, VAPOR
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: VAPOR OR MIST CAN
CAUSE HEADACHE, NAUSEA AND IRRITATION OF NOSE, THROAT AND LUNGS.
SKIN ABSORPTION: NONE EXPECTED. INGESTION: MAY BE HARMFUL OR FATAL
IF SWALLOWED. INGESTION MAY CAU SE NAUSEA, VOMITING, DIARRHEA, AND
GASTROINTESTINAL IRRITATION. CHRONIC: NONE SPECIFIED BY
MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:OVEREXPOSURE TO VAPORS CAN CAUSE
HEADACHES, DIZZINESS AND NAUSEA.
======================= First Aid Measures =======================
First Aid:SKIN: CLEAN WITH SOAP AND WATER. INGESTION: CONSULT MD.
INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. CONSULT MD.
===================== Fire Fighting Measures =====================
Extinguishing Media:FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL,
WATER FOG.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIP . WATER MAY BE USED TO COOL CLOSED CONTAINERS TO PREVENT
PRESSURE BUILD UP WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:POLYMER FILM CAN BURN. MATERIAL CAN
SPLATTER ABOVE 212F.
================== Accidental Release Measures ==================
Spill Release Procedures:WIPE UP IMMEDIATELY AND SAFELY DISCARD
ABSORBENT. IN THE EVENT OF LARGE SPILLS, DIKE THE AREA AND PUMP THE
MATERIAL TO AN EPA PERMITTED WASTE TANK.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:USE WITH ADEQUATE VENTILATION. AVOID
PROLONGED BREATHING OF VAPOR. AVOID PROLONGED OR REPEATED SKIN
CONTACT. KEEP AWAY FROM EXCESSIVE HEAT.
Other Precautions:AVOID ALL SOURCES OF HEAT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE REQUIRED IF AIRBORNE CONCS ARE MAINTAINED
BELOW OCCUP EXPOS LIMS LISTED IN INGS SECTION. FOR AIRBORNE CONCS
HIGHER THAN SUCH LIMS, WEAR NIOSH APPRVD MASK FOR ORG VAP, DUST,
MIST & FUMES. WHEN USI NG IN POORLY VENTILATED & (SUP DAT)
Ventilation:MAINTAIN GOOD VENTILATION TO KEEP PRODUCT VAPOR
CONCENTRATIONS BELOW SPECIFIED TLV.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA . WEAR PROTECTIVE CLOTHING AND BOOTS.
Work Hygienic Practices:USE GOOD PERS HYGIENE PRACTICES. DRY CONTAM
CLOTHING BEFORE REUSE. BARRIER CREAMS, DAILY SHOWERS & CHANGE OF
CLOTHES.
Supplemental Safety and Health
RESP PROT: CONFINED SPACES, USE NIOSH APPRVD FRESH-AIR SUPPLYING/SCBA.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
VOC Pounds/Gallon:121
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:VISCOUS LIQUID WITH MILD ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID MATERIALS THAT ARE WATER-REACTIVE. ALSO AVOID STRONG ALKALINE AND
ACIDIC SUBSTANCES.
Stability Condition to Avoid:EXCESS HEAT MAY CAUSE CONTAINERS TO
RUPTURE. AVOID TEMPERATURES BELOW 40F. AVOID FREEZING CONDITIONS.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
VARIOUS HYDROCARBONS, ETC, BY COMBUSTION.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS CURRENTLY IN FORCE FOR THIS PRODUCT HAZARD
CLASS.
======================= Other Information =======================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|