=====================  Product Identification  =====================

MSDS NAME:M-LINE 450-20S SOLDER
NIIN:00N085297
MSDS Number: CHBKC
=== Responsible Party ===
Company:MEASUREMENTS GROUP INC
Box:27777
City:RALEIGH
State:NC
ZIP:27611
Country:US
Info Phone Num:919-365-3800
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:R.L. FRIDLEY
CAGE:88952
=== Contractor Identification ===
Company:MEASUREMENTS GROUP
Address:9517 US HWY 64
Box:27777
City:RALEIGH
State:NC
ZIP:27611
Country:US
Phone:919-365-3800
CAGE:016Y7
Company:MEASUREMENTS GROUP INC
Address:9517 US 64 HWY
Box:City:WENDELL
State:NC
ZIP:27591
Country:US
Phone:919-365-3800
CAGE:88952

=============  Composition/Information on Ingredients  =============

Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Fraction by Wt: 95%
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3

Name:ANTIMONY (SARA 313) (CERCLA)
CAS:7440-36-0
RTECS #:CC4025000
Fraction by Wt: 5%
OSHA PEL:0.5 MG/M3
ACGIH TLV:0.5 MG/M3 (SB)
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE KNOWN.
Medical Cond Aggravated by Exposure:PRE-EXISTING CONDITIONS OF THE
    LUNGS, DISEASES OF THE BLOOD & BLOOD-FORMING ORGANS, KIDNEYS,
    NERVES & POSSIBLY REPRODUCTIVE SYSTEM.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. EYES:FLUSH IMMEDIATELY W/COOL
    WATER FOR AT LEAST 15 MINUTES. SKIN:FLUSH IMMEDIATELY W/COOL WATER.
    INGEST:SEEK MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:MELTED SOLDER WILL SOLIDIFY ON COOLING & CAN
    BE SCRAPED UP. USE CAUTION TO AVOID BREATHING FUMES IF A GAS TORCH
    IS USED TO CUT UP LARGE PIECES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM SOURCES OF SULFUR.
    AVOID BREATHING FUMES DURING SOLDERING.
Other Precautions:NOT USUALLY REQUIRED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USUALLY NOT REQUIRED. WHEN VENTILATION IS NOT
    SUFFICIENT TO REMOVE FUMES FROM BREATHING ZONE, A NIOSH APPROVED
    CARTRIDGE TYPE RESPIRATOR SHOULD BE WORN.
Ventilation:LOCAL EXHAUST &/OR MECHANICAL: KEEP BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE.
Supplemental Safety and Health
EYE PROT:& FULL LENGTH FACESHIELD .

==================  Physical/Chemical Properties  ==================

Spec Gravity:>1 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-GRAY METAL IN WIRE SHAPE.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACID OXIDIZERS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:NONE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:SOLDER IS RECLAIMABLE. DISPOSAL SHOULD BE I/A/W
    LOCAL, STATE & FEDERAL REGULATIONS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***