=====================  Product Identification  =====================

MSDS NAME:TTC-1 TIP TINNER
NIIN:00N086585
MSDS Number: CHFPH
=== Responsible Party ===
Company:MULTICORE SOLDERS INC
Address:1751 JAY ELL DR
City:RICHARDSON
State:TX
ZIP:75081
Country:US
Info Phone Num:972-238-1224
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:ROBERT GILBERT
CAGE:0YP31
=== Contractor Identification ===
Company:MULTICORE SOLDERS INC
Address:1751 JAY ELL DR
Box:City:RICHARDSON
State:TX
ZIP:75081
Country:US
Phone:214-238-1224
CAGE:0YP31

=============  Composition/Information on Ingredients  =============

Name:LEAD (SARA 313) (CERCLA)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: 20-30%
OSHA PEL:SEE 1910.1025
ACGIH TLV:0.15 MG/M3 DUST
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Fraction by Wt: 30-40%
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3

Name:AMMONIUM PHOSPHATE MONOBASIC; (AMMONIUM DIHYDROGEN
    ORTHOPHOSPHATE)
CAS:7722-76-1
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:AMMONIUM PHOSPHATE MONOBASIC; (SAND)
CAS:7722-76-1
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: WEAKNESS, VOMITING, LOSS OF
    APPETITE, CONVULSIONS, STUPOR AND POSSIBLY COMA. CHRONIC: WEAKNESS,
    INSOMNIA, HYPERTENSION, SLIGHT IRRITATION OF THE EYES, HEADACHE,
    POSSIBLE PARALYSIS. CHRONIC OVER EXPOSURE TO LEAD MAY RESULT IN
    DAMAGE TO BLOOD-FORMING, NERVOUS, URINARY AND REPRODUCTIVE SYSTEMS.
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: SINGS & SYMPTOMS OF OVEREXPOSURE:
    DUST VAPOR AND/OR FUMES MAY BE IRRITATING TO SKIN, EYES &
    RESPIRATORY SYSTEM. LEAD APPEARS ON NAVY OCCUPATIONAL CHEMICAL
    REPRODUCTIVE HAZARDS LIST. CONSULT	APPROPRIATE HEALTH
    PROFESSIONALS CONCERNING LATEST HAZARD LIST INFORMATION & SAFE
    HANDLING & EXPOSURE INFO .
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH COPIOUS QUANTITIES OF WATER FOR AT LEAST 15
    MINUTES. GET MEDICAL ATTENTION. SKIN: WASH WITH SOAP AND WATER.
    INHALATION: REMOVE FROM EXPOSURE. GET MEDICAL ATTENTION IF
    EXPERIENCING EFF ECTS OF OVEREXPOSURE. INGESTION: GET IMMEDIATE
    MEDICAL ATTENTION. NOTE TO MD: LEAD AND ITS INORGANIC COMPOUNDS ARE
    NEUROTOXINS WHICH MAY PRODUCE NEUROPATHY.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:DO NOT USE WATER ON FIRES WHERE MOLTEN
    METAL IS PRESENT. HIGH TEMPERATURES MAY PRODUCE HEAVY METAL FUMES,
    DUST AND/OR VAPOR.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PARTICULATE MATTER SHOULD BE STORED IN DRY
    CONTAINERS FOR LATER DISPOSAL. DUST MATERIAL SHOULD BE VACUUMED OR
    WET-SWEPT. DO NOT USE COMPRESSED AIR OR DRY SWEEPING AS A MEANS OF
    CLEANING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN DRY AREA. AVOID SKIN CONTACT.
    AVOID BREATHING SMOKE DURING SOLDERING.
Other Precautions:NONE KNOWN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AS SPECIFIED BY 29 CFR 1910.1025 (F) IF EXPOSURE
    EXCEEDS PEL. USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE
    OF CONCERN .
Ventilation:LOCAL EXHAUST: REMOVE SMOKE FROM HEATING AREA. MECHANICAL
    (GENERAL): ADEQUATE. SPECIAL/OTHER: NONE NEEDED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYEWASH & DELUGE
    SHOWER . PERSONAL CLOTHING & SHOES SHOULD BE PROTECTED FROM
    CONTAMINATION.
Work Hygienic Practices:WASH HANDS THORO W/SOAP & WATER AFTER HNDLG
    SOLDER, & BEFORE EATING/SMOKING. DO NOT EAT, DRINK/SMOKE IN WORK
    AREAS.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:361F,183C
Spec Gravity:4 (H*2O=1)
Solubility in Water:FLUX SOLUBLE
Appearance and Odor:GRAY METALLIC PASTE WITH SWEET ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:HIGH TEMPERATURES MAY PRODUCE HEAVY
    METAL FUMES, DUST AND/OR VAPORS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS. CONSULT A LICENSED HAZARDOUS WASTE COMPANY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***