=====================  Product Identification  =====================

MSDS NAME:B-1616 UN-REEL 5-MINUTE EPOXY
NIIN:00D007263
MSDS Number: CHLDG
=== Responsible Party ===
Company:ITW DEVCON
Address:30 ENDICOTT ST
City:DANVERS
State:MA
ZIP:01923
Country:US
Info Phone Num:617-777-1100
Emergency Phone Num:804-463-3476/617-777-1100
CAGE:0RZG3
=== Contractor Identification ===
Company:BALKAMP INC
Address:2601 S HOLT ROAD
Box:City:INDIANAPOLIS
State:IN
ZIP:46241
Country:US
Phone:317-244-7241
CAGE:70842
Company:ITW DEVCON
Address:30 ENDICOTT ST
City:DANVERS
State:MA
ZIP:01923-3712
Country:US
Phone:978-777-1100
CAGE:0RZG3
Company:NAPA
Box:UNKNOW
CAGE:0NBN5

=============  Composition/Information on Ingredients  =============

Name:2,4,6-TRIS(DIMETHYLAMINO METHYL) PHENOL
CAS:90-72-2
RTECS #:SN3500000
Fraction by Wt: <5%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50 RAT, >1600MG/KG.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE:MILD TO MODERATE IRRIT.SKIN:NOT AN
    IRRITANT.INHAL:NO DATA.CHRONIC:PROLONGED/REPEATED OVEREXPOSURE MAY
    CAUSE ALLERGIC SENSITIZATION.
Effects of Overexposure:MILD-MODERATE EYE IRRIT, ALLERGIC
    SENSTIIZATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/CLEAR WATER FOR 15MNS.SKIN:WASH THOROUGHLY
    W/SOAP/WATER.INGEST:CONTACT PHYSICIAN.DONT INDUCE
    VOMITING.INHAL:REMOVE TO FRESH AIR.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>500F,>260C
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:CO2, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF-CONTAINED
    BREATHING APPARATUS & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB SPILLAGE ON INERT MATL & DISCARD IN
    SUITABLE CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP HANDS AWAY FRM EYES WHEN HNDLG
    MATL OR BEFORE WASHING AFT USE.WASH THROUGHLY AFT
    USING-PARTICULARLY BEFORE EATING/SMOKING.STORE IN COOL DRY PLACE
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NEEDED IN NORMAL USE W/PROPER VENTILATION.
Ventilation:GENERAL MECHANICAL IS SATISFACTORY.IF ODOR IS DISAGREEABLE,
    USE LOCAL EXHAUST.
Protective Gloves:DISPO GLOVES FOR PROLONGED USE.
Eye Protection:NOT NECESSARY IN NORMAL USE.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER USING-PARTICULARLY BEFORE
    EATING OR SMOKING.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NA
Decomp Temp:Decomp Text:NP
Vapor Pres:NIL
Vapor Density:>1
Spec Gravity:1.64
pH:9.5
Viscosity:NP
Evaporation Rate & Reference:<1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE PUTTY RUBBIN, LOW ODOR
Percent Volatiles by Volume:0
Corrosion Rate:NP

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXOSURE TO OPEN FLAME OR EXCESSIVE HEAT.
Hazardous Decomposition Products:OXIDES OF CARBON, SULFUR, AND
    NITROGEN.
Conditions to Avoid Polymerization:HEAT IS GENERATED WHEN MIXED W/EPOXY
    RESIN.USE CAUTION WHEN MIXING LARGE QUANTITIES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:REMOVE TO WASTE DISPOSAL FACILITY OPERATING IN
    COMPLIANCE WITH STATE/LOC REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***