===================== Product Identification =====================
MSDS NAME:ENAMEL, NONFLAMING(DRY)CHLORINATED ALKYLOID RESIN, SEMIGLOSS
NIIN:01-344-5106
Status Code:A
MSDS Number: CJJJL
=== Responsible Party ===
Company:STIC-ADHESIVE PRODUCTS CO INC
Address:3950 MEDFORD ST
City:LOS ANGELES
State:CA
ZIP:90063-1675
Country:US
Info Phone Num:213-268-2956
Emergency Phone Num:(800)424-9300
Chemtrec Ind/Phone:(800)424-9300
CAGE:1BH90
=== Contractor Identification ===
Company:STIC-ADHESIVE PRODUCTS CO INC
Address:3950 MEDFORD ST
Box:City:LOS ANGELES
State:CA
ZIP:90063-1675
Country:US
CAGE:1BH90
============= Composition/Information on Ingredients =============
Name:BARIUM METABORATE MONOHYDRATE
Fraction by Wt: 15.0%
Other REC Limits:5 MG/CU.M
OSHA PEL:TOTAL DUST
ACGIH TLV:TOTAL DUST
Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 21.0%
Other REC Limits:10 MG/M3
OSHA PEL:TOTAL DUST
ACGIH TLV:TOTAL DUST
Name:ZINC PHOSPHATE
RTECS #:TD0590000
Fraction by Wt: 16.0%
Other REC Limits:NONE RECOMMENDED
Name:2-ETHYLHEXANOIC ACID COBALT(2+) SALT
CAS:136-52-7
Fraction by Wt: 3.0%
Other REC Limits:NONE RECOMMENDED
Name:CHLORENDIC ALKYLOID
Fraction by Wt: 35.0%
Name:RESIN SOLUTION TRADE SECRET REGISTRY
#41-0177680-5000381P(NJAPA)
Name:NAPHTHA, SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 9.0%
OSHA PEL:2900 MG/M3;500 PPM
ACGIH TLV:525 MG/M3;100 PPM
Name:LEVELING AGENT
Name:ANTI-SKINNING AGENT
Fraction by Wt: 1.0%
Name:THIXATROPIC AGENT
===================== Hazards Identification =====================
Health Hazards Acute and Chronic:EYES: SEVERE IRRITATION. SKIN: PRIMARY
SKIN IRRITATION. HARMFUL IF ABSORBED THRU SKIN. PROLONGED/REPEATED
CONTACT: ALLERGIC SKIN REACTION. INHAL:VAPOR/SPRAY MIST HARMFUL IF
INHALED. VAPOR IRRITATES EY ES/NOSE/THROAT/LUNGS. REPEATED EXPOSURE
TO HIGH VAPOR CONCENTRATIONS MAY IRRITATE RESPIRATORY SYSTEM &
PERMANENT BRAIN/NERVOUS SYSTEM DAMAGE. DELIBERATE MISUSE CAN BE
HARMFUL OR FATAL.
Explanation of Carcinogenicity:THIS PRODUCT CONTAINS A LOW LEVEL OF
FORMALDEHYDE. NTP, IARC, & OSHA ASSOCIATE FORMALDEHYDE W/ AN
INCREASED RISK OF CANCER.
Effects of Overexposure:EYE WATERING, HEADACHES, NAUSEA, DIZZINESS, &
LOSS OF COORDINATION INDICATE THAT SOLVENT LEVELS ARE TOO HIGH.
REDNESS, ITCHING, BURNING SENSATION, VISUAL DISTURBANCES MAY
INDICATE EXCESSIVE EYE CONTAC T. DRYNESS, ITCHING, CRACKING,
BURNING, REDNESS, SWELLING ARE CONDITIONS ASSOCIATED W/ EXCESSIVE
SKIN CONTACT.
======================= First Aid Measures =======================
First Aid:INGESTION: DO NOT INDUCE VOMITING. IF CONSCIOUS, GIVE 1 OR 2
GLASSES OF WATER TO DRINK. KEEP PERSON WARM & QUIET. GET IMMED MED
ATTENTION. EYES: FLUSH WITH WATER FOR 30 MINUTES, LIFTING LIDS TO
RINSE ENTIRE EYE. CALL DR IMMED. SKIN: FLUSH W/COPIOUS AMOUNTS OF
WATER, THEN FOLLOW W/ SOAP & WATER. CALL DR. INHALATION: REMOVE TO
FRESH AIR. APPLY CPR/OXYGEN IF NECESSARY. OTHER: IF INGESTION ANY
TYPE OF OVEREXPOSURE OR SYMPTOMS OF OVEREXPOSURE OCCUR
DURING/FOLLOWING PRODUCT USE, CONTACT POISON CONTROL CENTER,
EMERGENCY ROOM, OR PHYSICIAN IMMED. HAVE MSDS INFORMATION
AVAILABLE.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:=40.6C, 105.F
Autoignition Temp:Autoignition Temp Text:NA
Extinguishing Media:USE NATIONAL FIRE PROTECTION ASSOCIATION CLASS B
EXTINGUISHERS (CO2, DRY CHEMICAL, OR UNIVERSAL AQUEOUS FILM FORMING
FOAM) DESIGNED TO EXTINGUISH NFPA CLASS IC FLAMMABLE LIQUID FIRES
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY
MAY BE USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILD UP
& POSSIBLE AUTOIGNITION OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT.
IF WATER IS USED, FOG NOZZLES ARE PREFERRABLE. FIRE FIGHTERS
SHOULD WEAR SCBA.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
FROM HEAT, ELECTRICAL EQUIPMENT, SPARKS, & OPEN FLAMES. CLOSED
CONTRS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT. DO NOT APPLY ON
HOT SURFACES. TOXIC GASES MAY FO RM WHEN PRODUCT CONTACTS FLAME OR
HOT SURFACES.
================== Accidental Release Measures ==================
Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONEL W/
PROPER RESPIRATORY & SKIN/EYE PROTECTION SHOULD BE PERMITTED IN
AREA. REMOVE ALL IGNITION SOURCES. TAKE UP SPILLED MATERIAL W/
SAWDUST, VERMICULITE OR OTH ER ABSORBENT MATERIAL & PLACE IN
CONTAINERS FOR DISPOSAL.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE ABOVE 120 F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLASS IC FLAMMABLE LIQUIDS.
Other Precautions:IF THIS MATERIAL IS PART OF MULTIPLE COMPONENT
SYSTEM, READ MSDS(S) FOR THE OTHER COMPONENT(S) BEFORE BLENDING AS
THE RESULTING MIXTURE MAY HAVE THE HAZARDS OF ALL OF ITS PARTS.
GROUND CONTRS WHEN POU RING. AVOID FREE FALL OF LIQUIDS IN EXCESS
OF A FEW INCHES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:ENSURE VENTILATION CONTROLS, VAPOR EXHAUST, OR
FRESH AIR ENTRY. NIOSH/MESHA-APPROVED 9TC-23C AIR PURIFYING OR AIR
SUPPLIED (TC-19C) RESPIRATORS REDUCE EXPOSURES. READ RESPIRATOR
MANUFACTURER'S INSTRUC TIONS & LITERATURE CAREFULLY TO DETERMINE
THE TYPE OF AIRBORNE CONTAMINANTS AGAINST WHICH THE RESPIRATOR IS
EFFECTIVE & HOW IT IS TO BE PROPERLY FITTED.
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST IN VOLUME & PATTERN TO
KEEP CONCENTRATIONS < LOWEST EXPOSURE LIMITS, LEL < STATE LIMIT,&
REMOVE DECOMP PRODS WHEN WELDING
Protective Gloves:IMPERMIABLE GLOVES OF NITRILE OR NEOPRENE.
Eye Protection:CHEMICAL SPLASH GOGGLES, FACE SHIELD
Other Protective Equipment:CLEAN OR DISCARD CONTAMINATED CLOTHING &
SHOES. WEAR IMPERIABLE CLOTHING SUFFICIENT TO COVER EXPOSED SKIN
SURFACES (NITRILE OR NEOPRENE).
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:310 TO 390F @ 760 MM H
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:2.000 MM HG @ 68 F
Vapor Density:4.9 AIR=1
Spec Gravity:1.62 - 1.65
VOC Pounds/Gallon:340
pH:NA
VOC Grams/Liter:2.8
Corrosion Rate:NA
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ALKYLIES, STRONG MINERAL ACIDS, OR STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODUCTS WHEN
HEATED. WELDING, BRAZING, OR FLAME CUTTING MAY PRODUCE FUMES
INCLUDING CO, AND/OR HYDROGEN CHLORIDE GAS.
Conditions to Avoid Polymerization:STRONG OXIDIZING AGENTS.
=================== Toxicological Information ===================
Toxicological Information:AVOID LONG TERM & REPEATED CONTACT. THIS
PRODUCT CONTAINS TITANIUM DIOXIDE. ANIMALS INHALING MASSIVE
QUANTITIES OF TITANIUM DIOXIDE DUST DEVELOPED LUNG TUMORS. STUDIES
W/ HUMANS INDICATE NO INCREASED RISK OF CANCER. POTENTIAL FOR
INHALATION OF TITANIUM DIOXIDE DUSTS FROM COATINGS IS VERY LIMITED.
SINCE OVEREXPOSURES ARE NOT EXPECTED, THERE IS NO SIGNIFICANT HAZ
FOR MAN. THIS PRODUCT CONTAINS LOW LEVEL OF FORMALDEHYDE. BASED ON
ANIMAL STUDIES, NTP, IARC, & OSHA ASSOCIATE FORMALDEHYDE
W/INCREASED RISK OF CANCER. RECENT STUDIES W/HUMANS SHOW NO
CORRELATION BETWEEN FORMALDEHYDE & INCREASED CANCER RISK.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IN ACCORDANCE W/LOCAL, STATE, FEDERAL
REGULATIONS. RECYCLE EMPTY CONTAINERS OR DISPOSE OF THROUGH
APPROVED WASTE MANAGEMENT FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|