=====================  Product Identification  =====================

MSDS NAME:ROYCO 770 TYPE 1 AND TYPE 2
NIIN:00-111-6255
Status Code:A
MSDS Number: CJMKF
=== Responsible Party ===
Company:ROYAL LUBRICANTS COMPANY INC.
Box:518
City:EAST HANOVER
State:NJ
ZIP:07936-0518
Country:US
Info Phone Num:973-887-7411 / 7410  973-887-8404
Emergency Phone Num:973-887-7410
Chemtrec Ind/Phone:(800)424-9300
CAGE:07950
=== Contractor Identification ===
Company:ROYAL LUBRICANTS COMPANY INC.
Address:215 MERRY LN
Box:518
City:EAST HANOVER
State:NJ
ZIP:07936
Country:US
Phone:973-887-7411/7410
Contract Num:SP0450-99-M-B228
CAGE:07950

=============  Composition/Information on Ingredients  =============

Name:SYNTHETIC HYDROCARBON
CAS:68649-12-7
Minumum % Wt:60.
Maxumum % Wt:65.

Name:SYNTHETIC ESTER
Minumum % Wt:25.
Maxumum % Wt:30.
Other REC Limits:NONE SPECIFIED

Name:BARIUM DINONYLNAPHTHALENESULFONATE
CAS:25619-56-1
Minumum % Wt:2.
Maxumum % Wt:3.
Other REC Limits:0.5 MG/M3 SOLUBLE BA

Name:BUTYLATED TRIPHENYL PHOSPHATE
CAS:56803-37-3
Minumum % Wt:1.
Maxumum % Wt:2.

Name:MINOR ADDITIVES
< Wt:2.

=====================  Hazards Identification  =====================

Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:TARGET ORGANS: N/P. ACUTE - EYE
    CONTACT: BASED ON PRESENCE OF COMPONENT 3, PRODUCT IS IRRITATING TO
    EYES. SKIN CONTACT: PROLONGED OR REPEATED CONTACT MAY CAUSE VARIOUS
    SKIN DISORDERS SUCH AS DERMATITI S, FOLLICULITIS, OIL ACNE. RELEASE
    DURING HIGH PRESSURE USAGE MAY RESULT IN INJECTION OF OIL INTO SKIN
    CAUSING LOCAL NECROSIS. INHALATION: VAPORS (GENERATED AT HIGH
    TEMPERATURES ONLY) OR OIL MISTS MAY  BE MILDLY IRRITATING TO NOSE,
    THROAT, AND RESPIRATORY TRACT. INGESTION: THIS MATERIAL MAY BE
    HARMFUL/FATAL IF SWALLOWED. MAY RESULT IN VOMITING; ASPIRATION OF
    VOMITUS INTO LUNGS, EVEN SMALL QUANTITIE S MAY CAUSE PNEUMONITIS.
    CHRONIC - N/P.
Explanation of Carcinogenicity:THIS PRODUCT DOES NOT CONTAIN ANY
    CARCINOGEN AS IDENTIFIED BY IARC, NTP, OR OSHA.
Effects of Overexposure:IRRITATING TO EYES. PROLONGED OR REPEATED SKIN
    CONTACT MAY CAUSE VARIOUS SKIN DISORDERS SUCH AS DERMATITIS,
    FOLLICULITIS, OIL ACNE. RELEASE DURING HIGH PRESSURE USAGE MAY
    RESULT IN INJECTION OF OIL IN TO SKIN CAUSING LOCAL NECROSIS.
    INHALATION OF VAPORS (GENERATED AT HIGH TEMPERATURES ONLY) OR OIL
    MISTS MAY BE MILDLY IRRITATING TO NOSE, THROAT, AND RESPIRATORY
    TRACT. THIS MATERIAL MAY BE HARMFUL OR  FATAL IF SWALLOWED. MAY
    RESULT IN VOMITING.
Medical Cond Aggravated by Exposure:PRE-EXISTING EYE, SKIN AND
    RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS
    PRODUCT.

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT: IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR
    AT LEAST 15 MINUTES WHILE HOLDING EYELIDS OPEN. GET MEDICAL
    ATTENTION. SKIN CONTACT: REMOVE CONTAMINATED CLOTHING/SHOES AND
    WIPE EXCESS FRO M SKIN. FLUSH SKIN WITH WATER, FOLLOW BY WASHING
    WITH SOAP AND WATER. IF IRRITATION OCCURS, GET MEDICAL ATTENTION.
    DO NOT REUSE CLOTHING UNTIL CLEANED. INHALATION: REMOVE VICTIM TO
    FRESH AIR AND PROVI DE OXYGEN IF BREATHING IS DIFFICULT. GET
    MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING. IN GENERAL,
    NO TREATMENT IS NECESSARY UNLESS LARGE QUANTITIES OF PRODUCT ARE
    INGESTED. GET MEDICAL ADVICE .

=====================  Fire Fighting Measures  =====================

Flash Point:=221.1C, 430.F
Lower Limits:N/AV
Upper Limits:N/AV
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
    CHEMICAL DO NOT USE A DIRECT STREAM OF WATER. PRODUCT WILL FLOAT
    AND CAN BE REIGNITED ON SURFACE OF WATER.
Fire Fighting Procedures:MATERIAL WILL NOT BURN UNLESS PREHEATED. DO
    NOT ENTER CONFINED FIRE SPACE WITHOUT FULL BUNKER GEAR (HELMET WITH
    FACE SHIELD, BUNKER COAT, GLOVES, RUBBER BOOTS) INCLUDING POSITIVE
    PRESSURE NIOSH APPROV ED SELF-CONTAINED BREATHING APPARATUS. COOL
    FIRE EXPOSED CONTAINERS WITH WATER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:LARGE SPILLS: WEAR RESPIRATORY AND PROTECTIVE
    CLOTHING AS APPROPRIATE. SHUT OFF SOURCE OF LEAK IF SAFE TO DO SO.
    DIKE AND CONTAIN SPILLS. REMOVE WITH VACUUM TRUCK OR PUMP  TO
    STORAGE/SALVAGE VESSELS.  SOAK UP RESIDUE OR SMALL SPILLS WITH
    INERT MATERIAL SUCH AS SAND, CLAY, EARTH. SHOVEL INTO CONTAINERS
    FOR DISPOSAL. PREVENT RUN-OFF FROM ENTERING SEWERS. FLUSH AREA WITH
    WATER TO REMOVE TRACE RESIDUE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN  A COOL, DRY, ADEQUATELY
    VENTILATED PLACE. KEEP AWAY FROM OPEN FLAMES, AND HIGH
    TEMPERATURES.
Other Precautions:WASH WITH SOAP AND WATER BEFORE EATING, DRINKING,
    SMOKING OR USING TOILET FACILITIES. LAUNDER CONTAMINATED CLOTHING
    BEFORE REUSE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH-APPROVED RESPIRATOR AS REQUIRED TO
    PREVENT OVEREXPOSURE. IN ACCORD WITH 29CFR1910.134.USE EITHER AN
    ATMOSPHERE-SUPPLYING RESPIRATOR OR AN AIR-PURIFYING RESPIRATOR FOR
    ORGANIC VAPORS AND PART ICULATES.
Protective Gloves:WEAR GLOVES
Eye Protection:CHEMICAL SAFETY GOGGLES IF CONTACT IS POSSIBLE OR IN
    HIGH PRESSURE APPLICATIONS
Other Protective Equipment:WEAR OTHER CLOTHING AS REQUIRED TO MINIMIZE
    CONTACT.
Work Hygienic Practices:WASH WITH SOAP AND WATER BEFORE
    EATING,DRINKING, SMOKING OR USING TOILET FACILITIES. LAUNDER
    CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:V6
Spec Gravity:0.86
Evaporation Rate & Reference:N/A N-BUTYL ACETATE=1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER OIL (TYPE 1)/RED OIL (TYPE 2), SLIGHT ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
CONTACT WITH STRONG OXIDIZING AGENTS
Stability Condition to Avoid:AVOID HEAT, FLAME
Hazardous Decomposition Products:A COMPLEX MIXTURE OF AIRBORNE SOLID,
    LIQUID, PARTICULATES AND GASES WILL EVOLVE. CARBON MONOXIDE AND
    OTHER UNIDENTIFIED ORGANIC COMPOUNDS MAY BE FORMED.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF HAZARDOUS WASTE D005 BASED ON BARIUM
    CONTENT, UNLESS EXTRACTION RESULTS ARE LESS THAN EPA LIMITS.

=====================  Regulatory Information  =====================

Federal Regulatory Information:THE COMPONENTS OF THIS PRODUCT ARE
    LISTED ON THE EPA/TOXIC SUBSTANCE CONTROL ACT (TSCA)  INVENTORY OF
    CHEMICAL SUBSTANCES.
State Regulatory Information:

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***