=====================  Product Identification  =====================

MSDS NAME:ISO POLAR GASLINE ANTIFREEZE; PO010032
NIIN:00N091807
Status Code:A
MSDS Number: CJPQG
=== Responsible Party ===
Company:WARREN DISTRIBUTION, INC
Address:2850 RIVER RD
City:COUNCIL BLUFFS
State:IA
ZIP:51501
Country:US
Info Phone Num:402-977-5882
Emergency Phone Num:402-677-1331
Chemtrec Ind/Phone:(800)424-9300
CAGE:1C8Y9
=== Contractor Identification ===
Company:WARREN DISTRIBUTION, INC
Address:2849 RIVER RD
Box:City:COUNCIL BLUFFS
State:IA
ZIP:51501
Country:US
Phone:402-341-9397
CAGE:1C8Y9

=============  Composition/Information on Ingredients  =============

Name:ISOPROPYL ALCOHOL
CAS:67-63-0
RTECS #:NT8050000
= Wt:100.
OSHA PEL:980 MG/M3;400 PPM
ACGIH TLV:983 MG/M3;400 PPM
ACGIH STEL:1230 MG/M3;500 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT: MAY CAUSE MODERATE
    IRRITATION; LIQUID MAY DAMAGE EYE TISSUE IF NOT REMOVED PROPERLY.
    SKIN CONTACT: PROLONGED OR REPEATED CONTACT MAY CAUSE DRYNESS,
    IRRITATION, AND/OR DERMATITIS. INGESTIO N: IF TAKEN INTERNALLY IT
    MAY CAUSE BLINDNESS.
Effects of Overexposure:INHALATION MAY CAUSE COUGHING, SHORTNESS OF
    BREATH, DIZZINESS, INTOXICATION, AND COLLAPSE. SKIN ABSORPTION CAN
    RESULT IN BLURRED VISION, PHOTOPHOBIA, AND MAY CAUSE ACIDOSIS. 
    OTHER HEALTH INFORMATION:  METHANOLTOXICITY IS ANTAGONIZED WITH
    ETHANOL.
Medical Cond Aggravated by Exposure:DERMATITIS, ASTHMA.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH WITH RUNNING WATER FOR AT LEAST 15 MINUTES. IF
    IRRITATION DEVELOPS, SEEK MEDICAL ATTENTION. SKIN: WASH WITH SOAP
    AND WATER. IF IRRITATION DEVELOPS, SEEK MEDICAL ATTENTION.
    INHALATION: REMOV E FROM EXPOSURE, SEEK MEDICAL ATTENTION
    IMMEDIATELY. INGESTION: INDUCE VOMITING USING SYRUP OF IPECAC OR
    THE BACK OF A SPOON. CALL PHYSICIAN, HOSPITAL EMERGENCY ROOM, OR
    POISON CONTROL FOR INSTRUCTION S.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:=12.8C, 55.F
Lower Limits:2.5%
Upper Limits:12.1%
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . USE WATER SPRAY TO COOL EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:VAPOR ARE FLAMMABLE AT LESS THAN AMBIENT
    TEMPERATURES, AND ARE HEAVIER THAN AIR, AND THUS MAY TRAVEL ALONG
    GROUND TO DISTANT IGNITION SOURCE AND FLASH BACK. ALSO, CONTAINERS
    MAY RUPTURE IN INTENSE HEA T.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE AREA OF ALL UNNECESSARY PERSONNEL.
    WEAR FULL PROTECTIVE CLOTHING AND GEAR.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE ONLY IN TIGHTLY CLOSED &
    PROPERLY VENTED CONTAINERS AWAY FROM HEAT, SPARKS, OPEN FLAMES, &
    STRONG OXIDIZING AGENTS. USE ONLY NON-SPARKING TOOLS. BLANKET
    STORAGE W/DRY INERT GAS. STORE DRUMS W/BU NG IN UP POSITION.
    CAREFULLY VENT INTERNAL PRESSURE BEFORE REMOVING CLOSURE.
Other Precautions:GROUND CONTAINERS BEFORE TRANSFER. WILL ABSORB
    ATMOSPHERIC PRESSURE. ELECTRICAL EQUIPMENT SHOULD CONFORM TO
    NATIONAL ELECTRIC CODE. CARBON STEEL IS SATISFACTORY FOR MATERIAL
    OF CONSTRUCTION. DO NOT ST ORE IN ALUMINUM OR ZINC (GALVANIZED).
    HANDLE EMPTY DRUMS WITH CARE - VAPOR/RESIDUE MAY BE FLAMMABLE 
    AND/OR POISONOUS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED SELF CONTAINED BREATHING
    APPARATUS.
Ventilation:LOCAL EXHAUST IS RECOMMENDED AND GENERAL ROOM VENTILATION
    IS REQUIRED.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH AND DELUGE SHOWER MEETING ANSI
    DESIGN CRITERIA . USE APRON, BOOTS, AND FULL BODY COVERING IF SKIN
    CONTACT IS POSSIBLE.
Work Hygienic Practices:WASH HANDS BEFORE EATING, DRINKING, SMOKING, OR
    USING TOILET FACILITIES. PROMPTLY REMOVE SOILED CLOTHING AND WASH
    THOROUGHLY BEFORE RE-USE. SHOW AFTER CONTACT USING PLENTY OF SOAP
    AND WATER.
Supplemental Safety and Health
WORK PRACTICES/ENGINEERING CONTROLS: KEEP CONTAINERS CLOSED WHEN NOT IN
    USE.

==================  Physical/Chemical Properties  ==================

Boiling Pt:=82.2C, 180.F
Melt/Freeze Pt:=-88.3C, -127.F
Vapor Pres:(MM HG): 33
Vapor Density:2.1(AIR=1)
Spec Gravity:0.789 (H*2O=1)
Evaporation Rate & Reference:2.4 (N-BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR LIQUID, SLIGHT ALCOHOL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS, STRONG BASES.
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS AND OPEN FLAMES.
Hazardous Decomposition Products:OR BYPRODUCTS: INCOMPLETE COMBUSTION
    MAY YIELD CARBON MONOXIDE AND OTHER TOXIC FUMES.
Conditions to Avoid Polymerization:HIGH TEMPERATURES, SPARKS AND OPEN
    FLAMES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE OR OTHERWISE MANAGE AT RCRA PERMITTED
    WASTE MANAGEMENT FACILITY. DISPOSAL MUST BE IN ACCORDANCE WITH
    FEDERAL, STATE AND LOCAL REGULATIONS .

===================  MSDS Transport Information  ===================

Transport Information:DOT: NOT REGULATED. REPORTABLE QUANTITY: NOT
    APPLICABLE. FREIGHT CLASSIFICATION: METALLIC SOAPS OF FATTY ACIDS.
    SPECIAL TRANSPORTATION DATA: NONE.

=====================  Regulatory Information  =====================

SARA Title III Information:SECTION 313 SUPPLIER INFORMATION: THIS
    PRODUCT CONTAINS THE FOLLOWING TOXIC CHEMICAL SUBJECT TO THE
    REPORTING REQUIREMENTS OF SECTION 313 OF THE EMERGENCY PLANNING AND
    COMMUNITY RIGHT-TO-KNOW ACT OF 1 986 (40 CFR 372): COMPONENT NAME:
    ISOPROPYL ALCOHOL. %: 100. CAS NUMBER: 67-63-0. OSHA PEL: 400PPM.
    ACGHI TLV: 400 PPM.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***