=====================  Product Identification  =====================

MSDS NAME:LOW TEMP. MOD. POLYESTER, BEI-915A
NIIN:00-166-1681
Status Code:A
MSDS Number: CKYYB
=== Responsible Party ===
Company:RANBAR ELECTRICAL MATERIALS INC
Address:RT 993
Box:607
City:MANOR
State:PA
ZIP:15665
Country:US
Info Phone Num:724-864-8200
Emergency Phone Num:(800)424-9300
Chemtrec Ind/Phone:(800)424-9300
CAGE:1PP28
=== Contractor Identification ===
Company:RANBAR ELECTRICAL MATERIALS INC
Address:RT 993
Box:607
City:MANOR
State:PA
ZIP:15665
Country:US
Phone:724-864-8200
CAGE:1PP28

=============  Composition/Information on Ingredients  =============

Name:V.M.&P. NAPHTHA
CAS:8032-32-4
RTECS #:OI6180000
= Wt:25.
OSHA PEL:300 PPM
ACGIH TLV:300 PPM

Name:XYLENE
CAS:1330-20-7
RTECS #:ZE2100000
= Wt:15.
OSHA PEL:100 PPM
OSHA STEL:100 PPM
ACGIH TLV:100 PPM
ACGIH STEL:150 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:VARSOL
CAS:64742-88-7
Code:F
= Wt:5.
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER
Effects of Overexposure:SKIN: CAN CAUSE REDNESS, SWELLING, BLISTERS.
    PROLONGED EXPOSURE CAN CAUSE DEFATTING, FOLLICULAR DERMATITIS. MAY
    CAUSE SKIN SENSITIZATION, PHOTOSENSITIZATION. EYES: CAN CAUSE
    IRRITATION WITH REDNESS, T EARING, BLURRED VISION. INHALATION:
    INTOXICATION, BURNING SENSATION MOUTH/THROAT/STOMACH, VOMITING,
    WEAKNESS, DROWSINESS, COMA. INGESTED-LOCAL IRRITATION, BURNING
    SENSATION MOUTH/THROAT/STOMACH, VOMIT ING, DIARRHEA, DROWSINESS,AND
    OTHER INHALATION SYMPTOMS. RAPID BREATHING, CYANOSIS, TACHYCARDIA,
    INDICATES POSSIBLE ASPIRATION. THIS IS THEN FOLLOWED BY MASSIVE
    PULMONARY EDEMA, HEMORRHAGE. DEATH FROM  ASPHYXIATION POSSIBLE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN: THOROUGHLY WASH AFFECTED AREA WITH SOAP & WATER. REMOVE
    CONTAMINATED CLOTHING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
    EYES: FLUSH WITH LARGE AMOUNTS OF WATER OCCASIONALLY LIFTING LIDS.
    INHAL ATION: IF AFFECTED, REMOVE TO FRESH AIR. IF BREATHING IS
    DIFFICULT, ADMINISTER OXYGEN. IF BREATHING STOPPED, GIVE ARTIFICIAL
    RESPIRATION. KEEP PERSON WARM, QUIET AND GET MEDICAL ATTENTION.
    INGESTED: D O NOT INDUCE VOMITING! KEEP PERSON WARM, QUIET AND GET
    MEDICAL ATTENTION. ASPIRATION OF MATERIAL INTO LUNGS MAY RESULT IN
    CHEMICAL PNEUMONITIS WHICH CAN BE FATAL.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:=16.1C, 61.F
Lower Limits:0.9
Upper Limits:6.0
Extinguishing Media:DRY CHEMICAL, REGULAR FOAM, CARBON DIOXIDE.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS WITH A FULL
    FACEPIECE OPERATED IN A PRESSURE DEMAND OR POSITIVE PRESSURE MODE.
Unusual Fire/Explosion Hazard:MATERIAL IS HIGHLY VOLATILE AND READILY
    GIVES OFF VAPORS WHICH MAY TRAVEL ALONG THE GROUND OR BE MOVED BY
    VENTILATION AND CAUSE FLASH FIRES OR BE IGNITED EXPOLSIVELY BY
    PILOT LIGHTS, OTHER FLAMES SPAR KS, HEATERS, SMOKING, ELECTRIC
    MOTORS, OR OTHER SOURCES OF IGNITION AT LOCATIONS DISTANT FROM
    MATERIAL HANDLING POINT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID CONTACT WITH LIQUID OR SOLID. AVOID
    BREATHING VAPORS. SMALL SPILL: ABSORB ON ABSORBENT MATERIAL AND
    TRANSFER TO HOOD. LARGE SPILL:  STOP SPILL AT SOURCE, DIKE AREA OF
    SPILL TO PREVENT SPREADING,  PUMP LIQUID TO SALVAGE TANK.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER

======================	Handling and Storage  ======================

Handling and Storage Precautions:CONTAINERS FO THIS MATERIAL MAY BE
    HAZARDOUS WHEN EMPTIED. SINCE EMPTIED CONTAINERS RETAIN PRODUCT
    RESIDUES (VAPOR, LIQUID, AND/OR SOLID) ALL HAZARD PRECAUTIONS GIVEN
    IN THIS DATA SHEET MUST BE OBSERV ED.
Other Precautions:KEEP CONTAINERS TIGHTLY CLOSED. CHRONIC OVEREXPOSURE
    TO PRODUCT CAN PRODUCE BLOOD DISORDERS AND REVERSIBLE LIVER &
    KIDNEY DAMAGE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF TLV OF THIS PRODUCT OR ANY COMPONENT IS
    EXCEEDED, USE NIOSH APPROVED SELF-CONTAINED BREATHING APPARATUS.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL) AND/OR LOCAL
    EXHAUST VENTILATION TO MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:NEOPRENE, BUNA-N.
Eye Protection:CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING & BOOTS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:230-245F
Vapor Pres:15@38C
Vapor Density:3.8
Spec Gravity:0.893
Evaporation Rate & Reference:(NBUAC=1) 9.2
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER LIQUID
Percent Volatiles by Volume:55

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES.
Hazardous Decomposition Products:BURNING MAY PRODUCE CARBON MONOXIDE
    AND/OR CARBON DIOXIDE AND WATER. INCOMPLETE COMBUSTION MAY PRODUCE
    TOXIC VAPORS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

===================  Toxicological Information	===================

Toxicological Information:NONE SPECIFIED BY MANUFACTURER.

=====================  Ecological Information  =====================

Ecological:NONE SPECIFIED BY MANUFACTURER

====================  Disposal Considerations  ====================

Waste Disposal Methods:SMALL SPILL: ALLOW SOLVENT TO EVAPORATE IN HOOD.
    DISPOSE OF SOLIDS IN COMPLIANCE WITH LOCAL, STATE & FEDERAL
    REGULATIONS. LARGE SPILLS: DISPOSE OF IN COMPLIANCE WITH FEDERAL,
    STATE AND LOCAL REGULATIO NS.

===================  MSDS Transport Information  ===================

Transport Information:NONE SPECIFIED BY MANUFACTURER

=====================  Regulatory Information  =====================

SARA Title III Information:CONTAINS FOLLOWING TOXIC CHEMICAL SUBJECT TO
    THE REPORTING REQUIREMENTS OF SECTION 313 OF EPCRA AND 40 CFR 372:
    CAS# 1330-20-7, XYLENE, 15%.
Federal Regulatory Information:NONE SPECIFIED BY MANUFACTURER
State Regulatory Information:NONE SPECIFIED BY MANUFACTURER

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***