=====================  Product Identification  =====================

MSDS NAME:ZEP CLEAN N SHINE #1954 FLOOR FINISH
NIIN:01-412-0972
Status Code:A
MSDS Number: CLBSR
=== Responsible Party ===
Company:ZEP MFG CO DIV OF NATIONAL SERVICE INDUSTRIES
Address:1310 SEABOARD INDUSTRIAL BLVD NW
Box:2015
City:ATLANTA
State:GA
ZIP:30301
Country:US
Emergency Phone Num:(800)424-9300
Chemtrec Ind/Phone:(800)424-9300
CAGE:27674
=== Contractor Identification ===
Company:ZEP MANUFACTURING COMPANY
Address:1310 SEABOARD INDUSTRIAL BLVD NW
Box:2015
City:ATLANTA
State:GA
ZIP:30318
Country:US
Phone:877-428-9937
CAGE:27674

=============  Composition/Information on Ingredients  =============

Name:THIS PRODUCT CONTAINS NO INGREDIANTS THAT ARE INHERENTLY
    HAZARDOUS.

=====================  Hazards Identification  =====================

Health Hazards Acute and Chronic:THERE ARE NO KNOWN EFFECTS FROM ACCUTE
    OR CHRONIC EXPOSURE TO THIS PRODUCT. HOWEVER, IN LIGHT OF GOOD
    INDUSTRIAL HYGENE, EXPOSURE TO ANY CHEMICAL SHOULD BE KEPT TO A
    MINIMUM. MSDS DATA PERTAINS TO THE	PRODUCT AS DISPENSED FROM THE
    CONTAINER. ADVERSE HEALTH EFFECTS WOULD NOT BE EXPECTED UNDER
    RECOMMENDED CONDITIONS OF USE (DILUTED) SO LONG AS PRESCRIBED
    SAFETY PRECAUTIONS ARE PRACTICED.

=======================  First Aid Measures  =======================

First Aid:SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER.  IF IRRITATION
    PERSISTS, SEE DR. EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR 15
    MINUTES, OCCASIONALLY LIFTING UPPER AND LOWER LIDS. GET MEDUCAL
    ATTENTION.	I NHALATION: REMOVE TO FRESH AIR. IF IRRITATION
    PERSISTS, GET DR.  INGESTION: IF VICTIM IS CONSCIOUS, DRINK WATER. 
    DO NOT INDUCE VOMITING.  CALL DR IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:NONE
Extinguishing Media:NONCOMBUSTALBE.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:OBSERVE SAFETY JPROCEDURES AS GIVEN IN THIS
    MSDS. ABSORB SPILL ON INERT, ABSORBANT MATERIAL (EG. ZEP-O-ZORB).
    PICK UP AND PLACE RESIDUE IN A SUITABLE WASTE CONTAINER OR, IF
    PERMITTED, FLUSH TO SEWER.	THOROUGHLY RINSE SPILL AREA WITH WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE TIGHTLY CLOSED CONTAINER IN A
    DRY AREA AT TEMPERATURES BETWEEN 40-120 DEGREES F. KEEP AWAY FROM
    SKIN AND EYES. KEEP OUT OF THE REACH OF CHILDREN.
Other Precautions:CONSULT LOCAL, STATE AND FEDERAL AGENCIES FOR PROPER
    DISPOSAL IN YOUR AREA.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NO SPECIAL METHODS ARE REQUIRED
Ventilation:NO SPECIAL METHODS ARE REQUIRED
Protective Gloves:NEOPRENE, NITRILE OR NATURAL RUBBER GLOVES
Eye Protection:TIGHT FITTING SAFETY GLASSES OR GOGGLES, ESPECIALLY WHEN
    WEARING CONTACT LENSES
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:=100.C, 212.F
B.P. Text:APPROX 212F
Spec Gravity:1.03
pH:8.6 CONCENTRATE
Evaporation Rate & Reference:1.0 WATER=1
Solubility in Water:COMPLETE
Appearance and Odor:THIN, TRANSLUSCENT MILKY WHITE LIQUID WITH MILD
    ODOR.
Percent Volatiles by Volume:80

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE, AND
    OXIDES OF NITROGEN

====================  Disposal Considerations  ====================

Waste Disposal Methods:LIQUID WASTE NOT PERMITTED IN LANDFILLS. THIS
    PRODUCT IS NOT CONSIDERED A HAZARDOUS WASTE UNDER RCRA. UNUSABLE
    LIQUID MIGHT BE ABSORBED ON AN INERT, ABSORBANT MATERIAL (EG.
    ZEP-O-ZORB), DRUMMED, AND B E TAKEN TO A CHEMICAL OR INDUSTRIAL
    LANDFILL. IN SOME AREAS, DISPOSAL BY FLUSHING INTO A SANITARY SE
    WER WITH PLENTY OF WATER MAY BE PERMISSABLE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***