=====================  Product Identification  =====================

MSDS NAME:CORROSION XAEROSOL
NIIN:01-437-5222
Status Code:A
MSDS Number: CLLPG
=== Responsible Party ===
Company:CORROSION TECHNOLOGIES CORP.
Box:551625
City:DALLAS
State:TX
ZIP:75355-1625
Country:US
Info Phone Num:972-271-7361  FAX 972-278-9721
Emergency Phone Num:800-638-7361
Preparer's Name:ERNEST CARTER
CAGE:0VJ14
=== Contractor Identification ===
Company:CORROSION TECHNOLOGIES CORP.
Box:551625
City:DALLAS
State:TX
ZIP:75355-1625
Country:US
Phone:972-271-7361  FAX 972-278-9721
CAGE:0VJ14

=============  Composition/Information on Ingredients  =============

Name:BASE STOCK
CAS:72623-85-9
Code:F
= Wt:64.

Name:HYDROCARBON SOLVENT
CAS:8052-41-3
Code:F
RTECS #:WJ8925000
= Wt:8.
OSHA PEL:2900 MG/M3;500 PPM
ACGIH TLV:525 MG/M3;100 PPM

Name:ZINC DINONYTNAPHTHALENE SULFONATE
= Wt:1.

Name:PROPRIETARY INGREDIENTS
= Wt:15.

Name:PROPELIENT (HYDROCARBON A108)
= Wt:12.

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:>1400 MG/KG LD50/LC50 5000 PPM
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Health Hazards Acute and Chronic:NONE
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYE CONTACT: ESSENTIALLY NON-IRRITATING,
    HOWEVER VAPORS AND/OR MISTS CAN CAUSE MILD TO MODERATE IRRITATION.
    PROLONGED OR REPEATED CONTACT WITH THE SKIN HAS NOT BEEN A CAUSE OF
    DEFATTING OR DERMATITIS  IN NORMAL DAY TO DAY HANDLING OF MATERIAL.
    INHALATION: CAN CAUSE IRRITATION TO NOSE AND THROAT AND UPPER
    RESPIRATORY TRACT DURING PROLONGED EXPOSURE BUT NOT NORMALLY.
    INGESTION: SLIGHTLY TOXIC MAY BE  HARMFUL OR FATAL IF SWALLOWED.
    CAN CAUSE SEVERE IRRITATION OF MOUTH, THROAT AND ESOPHAGUS.
Medical Cond Aggravated by Exposure:NONE

=======================  First Aid Measures  =======================

First Aid:SKIN:REMOVE EXCESS BY WIPING AND FOLLOW BY WASHING WITH SOAP
    AND WATER UNTIL THERE IS NO ODOR.  EYES: FLUSH WITH COPIOUS
    QUANTITIES OF WATER (15 MINUTES). LIFT EYELIDS AND FLUSH INSIDE.
    SEEK PHYSICIAN  IF EYES BECOME INFLAMED. INHALATION: EVACUATE TO
    FRESH AIR. APPLY CPR IF REQUIRED. INGESTION: DO NOT INDUCE
    VOMITING. IF VOMITITNG OCCURS. TAKE CARE TO PREVENT ASPIRATION.
    GIVE 1/2 PINT OF MILK TO DR INK. SEEK AID OF A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:=132.2C, 270.F
Autoignition Temp:Autoignition Temp Text:NONE
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER SPRAY.
Fire Fighting Procedures:USE FULL PROTECTIVE AND SELF CONTAINED
    BREATHING APPARATUS. COVER WITH AN EXTINGUISHING AGENT. DO NOT
    SPRAY WITH WATER USING A DIRECT STREAM INTO THE BURNING LIQUID AS
    THIS MAY SPREAD THE FIRE.
Unusual Fire/Explosion Hazard:AEROSOL CONTAINERS MAY EXPLODE WHEN
    HEATED ABOVE 120 F.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB SMALL SPILLS USING DRY CLAY OR A
    COMMERCIAL ABSORBENT. COLLECT RESIDUE INTO SUFFABLE CONTAINER FOR
    PROPER DISPOSAL. MATERIAL MAY BE WASHED INTO FLOOR DRAINS EQUIPPED
    WITH AN OIL INTERCEPTOR.
Neutralizing Agent:NONE

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE APPROVED ORGANIC MIST VAPOR RESPIRATOR.
Ventilation:PROVIDE SUFFICIENT VENTILATION BY GENERAL OR MECHANICAL
    MEANS TO ENSURE THAT EXPOSURE LEVELS ARE KEPT BELOW COMBUSTIBLE
    LIMITS.
Protective Gloves:NONE
Eye Protection:USE APPROVED FACE MASK OR GOGGLES.
Other Protective Equipment:NONE
Work Hygienic Practices:WASH FACE AND HANDS WITH SOAP AND WATER AFTER
    USE.
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>212 DEGREES F.
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NONE
Vapor Pres:(MM HG @ 25 DEG. C)
Vapor Density:>1
Spec Gravity:(WATER=1): 0.878
Evaporation Rate & Reference:(BUTYL ACETATE=1): <1
Solubility in Water:SLIGHTLY EMULSIFIABLE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS SUCH AS LIQUID OR COMPRESSED OXYGEN OR PEROXIDES OR
    CHLORINES.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:BURNING PRODUCES NORMAL BY-PRODUCTS OF
    COMBUSTION INCLUDING: CARBON MONOXIDE, PHENOIS, OR PETROLEUM
    PRODUCTS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN AN APPROVED LANDFILL SITE OR
    INCINERATE AT A LICENSED WASTE RECLAIMING FACILITY. LIQUID WASTE
    MAY BE REMOVED BY MEANS OF A LICENSED RECLAIMER UNDER USED OIL
    CLASSIFICATION. BE SURE TO FO OLW ALL LOCAL, STATE, & FEDERAL
    REQUIREMENTS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***