=====================  Product Identification  =====================

MSDS NAME:R913G, FIBREDUX913G
NIIN:01-386-7187
Status Code:A
MSDS Number: CLNCM
=== Responsible Party ===
Company:CIBA-GEIGY CORPORATION, COMPOSITE MATERIALS
Address:5115 EAST LAPALMA AVENUE
City:ANAHEIM
State:CA
ZIP:92807-2018
Country:US
Info Phone Num:714-779-9000
Emergency Phone Num:800-888-8372
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:30137
=== Contractor Identification ===
Company:CIBA-GEIGY CORPORATION, COMPOSITE MATERIALS
Address:5115 EAST LAPALMA AVENUE
Box:City:ANAHEIM
State:CA
ZIP:92807-2018
Country:US
Phone:714-779-9000
CAGE:30137

=============  Composition/Information on Ingredients  =============

Name:BISPHENOL-A EPOXY RESIN

Name:GLYCIDYL BENZENAMINE

Name:CHLORINATED SUBSTITUTED UREA
ACGIH TLV:10 MG/M3

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE
Health Hazards Acute and Chronic:ORAL LD50: (RAT) 1-10 GM/KG
    (COMPONENT) DERMAL LD50: (RABBIT) 2-GM/KG (COMPONENT) SKIN
    IRRITATION: IRRITANT. EYE IRRITATION: IRRITANT. SENSITIZATION:
    SENSITIZER.
Effects of Overexposure:OVEREXPOSURE EFFECTS: OVEREXPOSURE TO THIS
    MATERIAL CAN CAUSE SKIN, EYE, AND RESPIRATORY IRRITATION. IN ANIMAL
    STUDIES, COMPONENTS IN THIS PRODUCT HAVE RESULTED IN EFFECTS TO THE
    KIDNEY, MALE REPRODUT IVE SYSTEM AND THE BLOOD, EVIDENCED BY
    METHEMOGLOBINEMIA.
Medical Cond Aggravated by Exposure:SKIN AND EYE CONDITIONS.

=======================  First Aid Measures  =======================

Eyes:  FOR EYE CONTACT, IMMEDIATELY FLUSH EYES FOR AT LEAST
    15 MINUTES, WITH RUNNING WATER. HOLD EYELIDS APART TO ENSURE
    RINSING OF THE ENTIRE EYE SURFACE AND LIDS WITH WATER. FOR SKIN
    CONTACT, IMMEDI ATELY WIPE AWAY EXCESS MATERIAL WITH A DRY TOWEL,
    WASH AFFECTED AREAS THOROUGHLY WITH LARGE AMOUNTS OF WATER, AND
    SOAP. INGESTION: IF SWALLOWED, IMMEDIATELY GIVE AT LEAST 3-4
    GLASSES OF WATER. IF INHA LED, REMOVE FROM AREA TO FRESH AIR. IF
    NOT BREATHING, GIVE CPR. GET IMMEDIATE MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Autoignition Temp:Autoignition Temp Text:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:DECOMPOSITION  AND COMBUSTION PRODUCTS
    MAY BE TOXIC.

==================  Accidental Release Measures  ==================

Spill Release Procedures:COLLECT AND PLACE INTO A CLOSABLE CONTAINER
    FOR DISPOSAL. WEAR PROTECTIVE EQUIPMENT AS SPECIFIED BELOW.
Neutralizing Agent:NONE

======================	Handling and Storage  ======================

Handling and Storage Precautions:WARNING ! CAUSES IRRITATION AND
    HARMFUL IF INGESTED. MAY CAUSE EFFECTS TO THE KIDNEY, BLOOD OR MALE
    REPRODUCTIVE SYSTEM. DO NOT HEAT IN BULK, AS DANGEROUS
    DECOMPOSITION MAY OCCUR, WITH TOXIC FUMES LIB ERATED. AVOID CONTACT
    WASH THOROUGHLY AFTER HANDLING, AND BEFORE EATING DRINKING, OR
    SMOKING.
Other Precautions:WEAR PROTECTIVE CLOTHING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH-APPROVED ORGANIC RESPIRATOR.
Ventilation:WORK IN WELL VENTILATED AREAS.
Protective Gloves:WORK GLOVES RECOMMENDED.
Eye Protection:WEAR SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:NONE
Work Hygienic Practices:NONE
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:NONE
Melt/Freeze Pt:=80.C, 176.F
Decomp Temp:>300.C, 572.F
Spec Gravity:1.4 (WATER=1.0)
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT YELLOW RESIN ON BLACK GRAPHITE FIBER/FABRIC
Percent Volatiles by Volume:<1%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, AND BASES.
Stability Condition to Avoid:AVOID CONDITIONS OVER 300 F .
Hazardous Decomposition Products:THERMAL DECOMPOSITION AND BURNING MAY
    PRODUCE CARBON MONOXIDE, CARBON DIOXIDE, NITROGEN OXIDES, AND OTHER
    TOXIC ORGANIC SPECIES.
Conditions to Avoid Polymerization:MAY OCCUR, IF HEATED IN BULK.

====================  Disposal Considerations  ====================

Waste Disposal Methods:LANDFILL, IN ACCORDANCE WITH LOCAL, STATE, AND
    FEDRAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***