===================== Product Identification =====================
MSDS NAME:EC-801B FUEL TANK SEALER (A-2)
NIIN:00-559-6131
MSDS Number: BFFLK
=== Responsible Party ===
Company:3M COMPANY
Address:3M CENTER
City:ST. PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1110
Emergency Phone Num:612-733-1110
CAGE:76381
=== Contractor Identification ===
Company:3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Address:3M CTR
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:800-364-3577/651-737-6501(24 HOURS)
CAGE:04963
Company:MINNESOTA MINING AND MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381
============= Composition/Information on Ingredients =============
Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 10%
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3; 9192
Name:POLYSULFIDE RUBBER
Name:CALCIUM CARBONATE (MARBLE) (LIMESTONE)
CAS:1317-65-3
RTECS #:EV9580000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9192
Name:PHENOLIC RESIN
===================== Hazards Identification =====================
Effects of Overexposure:EYE: IRRIT. SKIN: DEFATTING/DERMATITIS. VAPORS:
HEADACHE,NAUSEA, DIZINESS.
======================= First Aid Measures =======================
First Aid:EYE: FLUSH WITH WATER 15 MIN,CALL A PHYSICIAN.SKIN: WASH WITH
SOAP AND WATER. INHALATION: PROVIDE FRESH AIR.
===================== Fire Fighting Measures =====================
Flash Point:102F/38C (CC)
Lower Limits:1.8
Upper Limits:11.5
Extinguishing Media:CO2,FOAM DRY CHEM
================== Accidental Release Measures ==================
Spill Release Procedures:EXTINGUISH ALL IGNITION SOURCES. COLLECT
SPILLED MATERIAL. CLEAN UP RESIDUE AND PLACE IN METAL CONTAINER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM HEAT,SPARKS AND OPEN
FLAME. USE ONLY IWTH ADEQUATE VENTILATION TO REMOVE AND PREVENT
VAPOR BUILD UP. KEEP CONTAINER CLOSED.
Other Precautions:AVOID PROLONG BREATHING OF VAPORS AND PROLONGED OR
REPEATED SKIN CONTACT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL EXHAUST.
Protective Gloves:RECOMMENDED
Eye Protection:CHEMICAL GOGGLES
Supplemental Safety and Health
ADD INGRED: LITHOPONE & WATER. MFR ID CODE: 62-1287-9572-1.PKG SIZE: 1
QT. PART A OF TWO PART KIT.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:175F/79C
Vapor Pres:80
Vapor Density:2.5
Spec Gravity:1.4
Evaporation Rate & Reference:2.7 (ETHER)
Solubility in Water:SLIGHT
Appearance and Odor:BLACK LIQUID - SOLVENT ODOR
Percent Volatiles by Volume:10
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO,CO2,SULFUR COMPOUND
==================== Disposal Considerations ====================
Waste Disposal Methods:SEND TO HAZARDOUS WASTE MANAGEMENT FACILITY.
DISPOSE IN A SECURE LANDFILL. EPA HAZARDOUS WASTE NUMBER D-001.
LOCAL,STATE AND FEDERAL REGULATIONS COMPLY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|