===================== Product Identification =====================
MSDS NAME:ROYCO 601A
NIIN:00-559-3071
MSDS Number: BFFKV
=== Responsible Party ===
Company:ROYAL LUBRICANTS COMPANY,INC.
Emergency Phone Num:201-887-7410
CAGE:07950
=== Contractor Identification ===
Company:ROYAL LUBRICANTS COMPANY INC.
Address:215 MERRY LN
Box:518
City:EAST HANOVER
State:NJ
ZIP:07936
Country:US
Phone:973-887-7411/7410
CAGE:07950
============= Composition/Information on Ingredients =============
Name:ISODECYL PELARGONATE
Fraction by Wt: <30%
Name:DIMETHYL SILICONE
CAS:9016-00-6
RTECS #:TQ2690000
Fraction by Wt: <45%
Name:METHYL PHENYL SILICONE
Fraction by Wt: <20%
Name:DI-2-ETHYL HEXYL SEBACATE
CAS:122-62-3
RTECS #:VS1000000
Fraction by Wt: <10%
Name:LITHIUM STEARATE
CAS:4485-12-5
RTECS #:WI4370000
Fraction by Wt: <10%
===================== Hazards Identification =====================
Effects of Overexposure:EYE,SKN:IRRT. INHL:MEMBRANE IRRT. INGEST: GI
IRRT, DIARR, POSSASPIRATION PNEUMONIA.
======================= First Aid Measures =======================
First Aid:EYE:FLUSH 15 MIN W/AMPLE WATER.SKN:WASH
SOAP&WATER.INHL:REMOVE TO FRESH/AIR,GIVE O*2 IF REQD.INGEST:DO NOT
INDUCE VOMIT.IF CONSC, GIVE 1/2 PINT MILK OR WATER.IF VOMIT,PLACE
HEAD BELOW HIPS. GET MEDIC AL ATTENTIONALL CASES. REMOVE ALL CONTAM
CLOTHING.
===================== Fire Fighting Measures =====================
Flash Point:440F
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEM
Fire Fighting Procedures:USE AIR-SUPP BRTHNG EQUIP FOR ENCLOSED AREA
Unusual Fire/Explosion Hazard:COOL EXPOSED CNTNRS W/WATER SPRAY. AVOID
BRTHNG VAPOR OR FUMES. DO NOT MIX OR STORE W/OXIDANTS.
================== Accidental Release Measures ==================
Spill Release Procedures:RECOVER FREE LIQ. ADD ABSORBENT: SAND, EARTH,
FLOOR DRY, ETC, TO SPILL AREA. KEEP PROD OUT OF SEWERS &
WATERCOURSES. ADVISE AUTH IF PROD HAS ENTERED SEWERS OR
WATERCOURSES.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CNTNRS CLOSED WHEN NOT IN USE. DO
NOT STORE NEAR HEAT, SPARKS, FUMES, STRONG OXIDANTS.
Other Precautions:REMOVE OIL-SOAKED CLOTHING & LAUNDER BEFORE REUSE.
DISCARD OIL-SOAKED SHOES. WASH THOROUGHLY SKIN W/SOAP & WATER
BEFORE HANDLING FOOD.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NORM NOT NEEDED
Ventilation:SUFFICIENT LOCAL EXHST
Protective Gloves:CHEM RESIST
Eye Protection:SPLASH GOGGLES/FACE SHLD
Other Protective Equipment:CHEM RESIST APRON IF PROLONG SKIN CNTCT
EXPECTED
Supplemental Safety and Health
UPDATE PER OSHA HCS MSDS DTD INOV85
================== Physical/Chemical Properties ==================
HCC:V6
Boiling Pt:B.P. Text:>700F
Spec Gravity:0.9135
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:LIGHT TAN, SEMI-FLUID, SLIGHT ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS: LIQ CHLORINE, CONC OXYGEN, HYPOCHLORITES
Hazardous Decomposition Products:FUMES, SMOKE, CARBON MONOXIDE, SULFUR
OXIDES
==================== Disposal Considerations ====================
Waste Disposal Methods:ASSURE CONFORMITY W/APPLICABLE DISPOSAL REG.
DISPOSE OF ABSORBED MATL AT APPRVD WASTE DISPOSAL SITE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|