=====================  Product Identification  =====================

MSDS NAME:LO-SHEEN ENAMEL WHITE AND PASTEL
NIIN:00B160005
MSDS Number: BBBST
=== Responsible Party ===
Company:PPG INDUSTRIES INC.
Address:260 KAPPA DRIVE
City:PITTSBURG
State:PA
ZIP:15238
Country:US
Info Phone Num:412963-5822
Emergency Phone Num:304843-1300
CAGE:92022
=== Contractor Identification ===
Company:PPG INDUSTRIES INC.
Address:260 KAPPA DRIVE
Box:City:PITTSBURG
State:PA
ZIP:15238
Country:US
Phone:412963-5822
CAGE:92022

=============  Composition/Information on Ingredients  =============

Name:FILM FORMERS,RESINS,AND ADDITIVES(PROPRIETARY)
Fraction by Wt: 20%

Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 25%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Name:CALCIUM CARBONATE
CAS:471-34-1
RTECS #:FF9335000
Fraction by Wt: 20%
ACGIH TLV:10.00 MG/M3

Name:HYDROTREATED HEAVY NAPHTHA
CAS:64742-48-9
Fraction by Wt: 30%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:INGESTION:HARMFUL OR FATAL IF
    SWALLOWED.EYE CONTACT:CAUSES EYE IRRITATION.SKIN:MAY CAUSE MODERATE
    SKIN IRRITATION.VAPOR AND SPRAY MIST MAY BE HARMFUL IF INHALED.
Effects of Overexposure:REDNESS,ITCHING,BURNING SENSATION AND VISUAL
    DISTURBANCES MAY INDICATE EXCESSIVE EYE
    CONTACT.DRYNESS,ITCHING,CRACKING,BURNING,REDNESS,AND SWELLING ARE
    CONDITIONS ASSOCIATED WITH EXCESSIVE SKIN CONTACT .

=======================  First Aid Measures  =======================

First Aid:IF SWALLOWED DO NOT INDUCE VOMITING.IN CASE OF EYE
    CONTACT,FLUSH EYES IMMEDIATELY WITH PLENTY OF WATER FOR AT LEAST 15
    MINUTES.IN CASE OF SKIN CONTACT,REMOVE PROMPTLY BY WIPING,FOLLOWED
    BY WATERLESS H AND CLEANER AND SOAP AND WATER.IF INHALED REMOVE TO
    FRESH AIR.APPLY ARTIFICIAL RESPIRATION AND OTHER SUPPORT MEASURES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:120 DEG. F
Lower Limits:0.7
Upper Limits:U/I
Extinguishing Media:USE NATIONAL FIRE PROTECTION ASSOC.CLASS B
    EXTINGUISHERS(CARBON DIOXIDE,DRY CHEMICAL,OR AQUEOUS FILM FORMING
    FOAM).
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE.WATER SPRAY MAY
    BE USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILD-UP AND
    POSSIBLE AUTOIGNITION OR EXPLOSION.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED.ISOLATE
    FROM HEAT,ELECTRICAL EQUIPMENT,SPARKS AND OPEN FLAMES.CLOSED
    CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION.ONLY PERSONNEL
    EQUIPPED WITH PROPER RESPIRATORY AND SKIN AND EYE PROTECTION SHOULD
    BE ALLOWED IN AREA.REMOVE ALL SOURCES OF IGNITION.TAKE UP SPILLED
    MATERIAL WITH SAWDUST,V ERMICULITE,OR OTHER ABSORBENT MATERIAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120 DEGREES F.STORE
    LARGE QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF
    NFPA CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
    COATING SYSTEM,READ THE MATERIAL SAFETY DATA SHEET(S) FOR THE OTHER
    COMPONENT OR COMPONENTS BEFORE BLENDING AS THE RESULTING MIXTURE
    MAY HAVE THE HAZAR DS OF ALL OF ITS PARTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED (TC-23C-) PAINT SPRAY OR AIR
    SUPPLIED (TC-19C-) RESPIRATORS MAY ALSO REDUCE EXPOSURE.
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION.
Protective Gloves:IMPERMEABLE GLOVES
Eye Protection:SPLASH GOGGLES OR FULL FACE SHIELD
Other Protective Equipment:WEAR PROTECTIVE CLOTHING,INCLUDING
    IMPERMEABLE APRON&GLOVES CONSTRUCTED OF:NITRILE RUBBER,NEOPRENE
    RUBBER/POLYVINYL ALCO
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
    SHOES.
Supplemental Safety and Health
AVOID LONG-TERM AND REPEATED CONTACT.THIS PRODUCT CONTAINS TITANIUM
    DIOXIDE.IN A LONG TERM STUDY,ANIMALS INHALING TITANIUM DIOXIDE DUST
    DEVELOPED LUNG TUMORS.STUDIES WITH HUMANS INVOLVED IN MANUFACTUR E
    OF THIS PIGMENT INDICATE NO INCREASEDRISK OF CANCER FROM EXPOSURE.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:100-242C
Vapor Pres:0.8 MMHG
Vapor Density:>THAN AIR
Spec Gravity:1.29
pH:U/I
Evaporation Rate & Reference:12
Solubility in Water:0.0%
Percent Volatiles by Volume:56.70

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES,STRONG MINERAL ACIDS,OR STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:HAZ.DECOMP.OCCURS WHEN
    HEATED.WELDING,BRAZING,OR FLAME CUTTING SURFACES W/THIS PRODUCT MAY
    PRODUCE FUMES-CARBON MONOXID

====================  Disposal Considerations  ====================

Waste Disposal Methods:EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED
    OF THROUGH AN APPROVED WASTE MANAGEMENT FACILITY.DISPOSE OF IN
    ACCORDANCE WITH LOCAL,STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***