=====================  Product Identification  =====================

MSDS NAME:DBT(T-12, THERMOLITE-12.)
NIIN:00-910-8667
MSDS Number: BFWBQ
=== Responsible Party ===
Company:GENERAL ELECTRIC COMPANY, SILICONE PRODUCTS DIV
Emergency Phone Num:714-8642310
CAGE:01139
=== Contractor Identification ===
Company:GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT
Address:260 HUDSON RIVER RD
Box:City:WATERFORD
State:NY
ZIP:12188
Country:US
Phone:518-237-3330/800-332-3390
CAGE:01139

=============  Composition/Information on Ingredients  =============

Name:DIBUTYL TIN DILAURATE (AS TIN)
CAS:77-58-7
RTECS #:WH7000000
Fraction by Wt: 100%
OSHA PEL:S, 0.1 MG/M3
ACGIH TLV:S, 0.1 MG/M3; 8990

=====================  Hazards Identification  =====================

Effects of Overexposure:SEVERE EYE IRRITATION ON CONTACT, PROLONGED
    SKIN CONTACT IS IRRITATING.

=======================  First Aid Measures  =======================

First Aid:INHAL:RMV TO FRESH AIR. IF NOT BRTHNG GIVE CPR; IF BRTHNG
    DIFF GIVE OXYGEN. EYE:IMMED FLUSH W/PLENTY OF WATER. SKIN:WASH
    W/SOAP&WATER. RMV CONTAM CLTHG&SHOES. INGEST:INDUCE VOMIT. RPT
    UNTIL VOMIT IS C LEAR. NOTHG BY MOUTH IF UNCONSC. GET MEDICAL ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point:455 DEG F (COC)
Extinguishing Media:ALL STANDARD FIREFIGHTING AGENTS ARE SUITABLE.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB IN INERT MATERIAL. WEAR RUBBER GLOVES
    DURING CLEANUP. PLACE SPILL IN METAL CONTAINER FOR DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE
Other Precautions:DO NOT INGEST. OBSERVE GOOD PERSONAL HYDIENE NEEDS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE
Ventilation:LOCAL VENTILATION.
Protective Gloves:NEOPRENE GLOVES
Eye Protection:SAFETYGLASSES
Other Protective Equipment:SUITABLE APRON IF HANDLING FREQUENTLY.
Supplemental Safety and Health
MSDS DTD 14NOV86.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:>400F
Spec Gravity:1.05
Evaporation Rate & Reference:LOW
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS OR YELLOWISH OILY LIQ; FAT-LIKE ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:AT ELEVATED TEMP, TIN OXIDES, CO*2 &
    HYDROCARBONS

====================  Disposal Considerations  ====================

Waste Disposal Methods:DBT IS NOT HAZARDOUS WASTE PER 40CFR261.
    DISPOSAL PER APPLICABLE STATE/LOCAL ORDNANCES FOR INDUSTRIAL WASTE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***