===================== Product Identification =====================
MSDS NAME:LOCTITE GRADE A, ANAEROBIC ADHESIVE
NIIN:00-907-3961
MSDS Number: BFVYT
=== Responsible Party ===
Company:LOCTITE CORP
Emergency Phone Num:203-278-1280EXT313
CAGE:7K128
=== Contractor Identification ===
Company:LOCTITE CORP
Address:705 N MT RD
City:NEWINGTON
State:CT
ZIP:06111
Country:US
Phone:312-689-6200
CAGE:7K128
Company:LOCTITE CORPORATION
Address:1001 TROUT BROOK CROSSING
Box:City:ROCKY HILL
State:CT
ZIP:06067-3910
Country:US
Phone:860-571-5100
CAGE:05972
============= Composition/Information on Ingredients =============
Name:DIMETHACRYLATE ESTERS
Fraction by Wt: 91.0%
Name:TERTIARY AMINE
Fraction by Wt: 1.8%
Name:CATALYST
Fraction by Wt: 7.0%
===================== Hazards Identification =====================
Effects of Overexposure:MAY CAUSE DERMATITIS ON PROLONGED CNTCT IN
SENSITIVE INDIV
======================= First Aid Measures =======================
First Aid:SKIN/EYE: FLUSH W/WATER. INGEST: INDUCE VOMIT.
===================== Fire Fighting Measures =====================
Flash Point:200F CC
Extinguishing Media:CO*2, DRY CHEM, FOAM
================== Accidental Release Measures ==================
Spill Release Procedures:FLUSH W/SOLVENTS, TAKING PRECAUTIONS FOR POSS
VAPORS OR FIRE HAZ FROM SOLVENT USED. MIL-SPEC REC WIPING OFF SPILL
W/CLOTH MOISTENED W/WATER OR TRICHLOROETHYLENE.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE BELOW 110F TO RETAIN SHELF LIFE
Other Precautions:AVOID PROLONGED SKIN CNTCT
============= Exposure Controls/Personal Protection =============
Protective Gloves:REC
Eye Protection:REC
Supplemental Safety and Health
VAP PRESS <5.0 AT 80F. SOL IN WATER: LOW. PHNSY STATES GRADE A
ANAEROBIC ADHESIVE CONTAINS 90% POLYESTER & 3% ORGANIC PEROXIDE.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:>300F
Spec Gravity:1.0710
Appearance and Odor:RED LIQ, MILD ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
WILL ATTACK SOME THERMOPLASTICS
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IAW FED, STATE, LOCAL REG
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|