===================== Product Identification =====================
MSDS NAME:SCOTCHWELD 2214 ADHESIVE REGULAR
NIIN:00-926-9134
MSDS Number: BFWYN
=== Responsible Party ===
Company:3M COMPANY - ADHESIVES, COATINGS, SEALERS DIV
Emergency Phone Num:612-733-1110 OP55
CAGE:04963
=== Contractor Identification ===
Company:3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Address:3M CTR
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:800-364-3577/651-737-6501(24 HOURS)
CAGE:04963
============= Composition/Information on Ingredients =============
Name:DICYANDIAMIDE, AL POWDER, SYN RUBBER, AMORPHOUS SILICA
MIXTURE (50-52%)
ACGIH TLV:N/D
Name:EPOXY RESIN BLEND, DILUENT, POLYGLYCOL DIEPOXIDE RESIN
BLEND (45-47%)
ACGIH TLV:N/D
Name:3-(P-CHLOROPHENYL)-1-1-DIMETHYL UREA (CAS:150-68-5)(2-4%)
SEE OTHER PRECAUTIONS.
CAS:150-68-5
RTECS #:YS6300000
ACGIH TLV:N/D
===================== Hazards Identification =====================
Effects of Overexposure:EYE,SKN: IRRT,POSS SENSITIZATION.INH:NONE
EXPECTED @ ROOM TEMP.SENS/IRRT FROM CURING VAPORS OR DUST
======================= First Aid Measures =======================
First Aid:EYE: FLUSH 10 MIN W/COPIOUS WATER. CALL PHYS. SKIN: WASH
SOAP/WATER. REMOVE CONTAMINATED CLOTHING. INH: REMOVE TO FRESH AIR,
CALL PHYS IF BREATHING DIFFICULT. INGEST: NO TOXIC EFFECTS
EXPECTED.
===================== Fire Fighting Measures =====================
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:USE SCBA IN FIRES INVOLVING THIS MATERIAL
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:OBSERVE ALL LISTED PRECAUTIONS. COLLECT
SPILLAGE, CLEANUP RESIDUE, STORE/SHIP IN APPROVED CONTAINERS ONLY.
USE ABSORBENTS AS NEEDED.
====================== Handling and Storage ======================
Handling and Storage Precautions:VENT CURING OVENS TO OUTDOORS. AVOID
SKN/EYE CONTACT.
Other Precautions:3-(P-CHLOROPHENYL)-1-1 DIMETHYL UREA IS SUSPECT
CARCINOGEN. NO EXPOSURE EXPECTED IN NORMAL USE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE DUST MASK DURING GRINDING/CUTTING CURED
RESIN.AVOID INHL CUR VAP
Ventilation:MECH VENT W/ADEQUATE AIR FLOW
Protective Gloves:IMPERVIOUS GLOV
Eye Protection:USE SAFETY GLASSES
Other Protective Equipment:PREVENT SKN/EYE CONTACT
Supplemental Safety and Health
P/N FORMERLY SCOTCHWELD EC-2214 ADH REGULAR. 3M ID#: 62-2214-XXXX-X;
UPDATE PER 3M MSDS(OSHA) 14 OCT 85, DOC #1026665.
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:1.44
Solubility in Water:VERY SLIGHT
Appearance and Odor:GRAY VISCOUS PASTE
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:NO
STRONG OXIDANTS
Stability Condition to Avoid:PROLONGED STORAGE AT ELEVATED TEMP.
Hazardous Decomposition Products:CO,CO*2,N,HCN POSSIBLE WHEN EXP TO
EXCESSIVE HEAT/FLAME.
Conditions to Avoid Polymerization:ELEVATED STORAGE TEMP.
==================== Disposal Considerations ====================
Waste Disposal Methods:COMMERCIAL INCINERATION AT 99.99% EFF OR
RECLAMATION IS PREFERRED. LANDFILL OR OTHER DISPOSAL IAW
LOC/STATE/FED REGS ONLY
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|