=====================  Product Identification  =====================

MSDS NAME:SCOTCH GRIP RUBBER ADHESIVE 880
NIIN:00-926-9199
MSDS Number: BFWZD
=== Responsible Party ===
Company:3MCOMPANY
Address:3M CENTER
City:ST. PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1110
Emergency Phone Num:612-733-1110
CAGE:76381
=== Contractor Identification ===
Company:3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Address:3M CTR
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:800-364-3577/651-737-6501(24 HOURS)
CAGE:04963
Company:MINNESOTA MINING AND  MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381

=============  Composition/Information on Ingredients  =============

Name:ALIPHATIC PETROLEUM DISTILLATE (MAY CONTAIN UP TO 0.5%
    BENZENE-0.1% TYPICAL)
Fraction by Wt: 45.0%
ACGIH TLV:200 PPM (MFG)

=====================  Hazards Identification  =====================

Effects of Overexposure:LIQ: IRRIT EYES, DEFAT SKIN. VAPORS: DIZ,
    NAUSEA, POSS. NARCOSIS. INGEST: ABDOM. IRRIT, NAUSEA,VOMI

=======================  First Aid Measures  =======================

Eyes: IMMED FLUSH EYES W/ PLENTY OF WATER FOR 10 MIN, CALL A
    PHYSICIAN. SKIN: WASH W/ SOAP & WATER INHALATION: PROVIDE FRESH
    AIR. INGESTION: DO NOT INDUCE VOMITING, CALL A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:-14 F CC
Lower Limits:1.0
Upper Limits:11.
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:EXTINGUISH ALL IGNITION SOURCES. COLLECT
    SPILLED MATERIAL & PLACE IN A CLOSED METAL CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & OPEN
    FLAME. USE ONLY IN AREAS ADEQUATELY VENTILATED TO PREVENT VAPOR
    BUILDUP.
Other Precautions:AVOID EYE CONTACT. AVOID PROLONGED OR REPEATED
    CONTACT W/ SKIN OR BREATHING OF VAPORS. KEEP CONTAINER CLOSED WHEN
    NOT IN USE. DOT: FLAMMABLE LIQUID.

=============  Exposure Controls/Personal Protection  =============

Ventilation:USE LOCAL EXHAUST
Protective Gloves:NEOPRENE OR PV
Eye Protection:GOGGLES
Supplemental Safety and Health
ADDITIONAL INGREDIENTS: SYNTHETIC RUBBER, RESINS AND STABILIZERS
    (APPROX. 30%). SOLUBILITY IN WATER: LOW.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:140 F
Vapor Pres:12
Vapor Density:3.0
Spec Gravity:0.830
Evaporation Rate & Reference:2+ (ETHER)
Appearance and Odor:LIGHT TAN LIQUID - SOLVENT ODOR
Percent Volatiles by Volume:70.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO*2

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONTAINS HEAVY METALS. DISPOSE IN ACCORDANCE W/
    FED., STATE & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***