===================== Product Identification =====================
MSDS NAME:MISTACOTE 814-F
NIIN:00-926-9174
MSDS Number: BFWYZ
=== Responsible Party ===
Company:M-R PLASTICS AND COATINGS.INC
Emergency Phone Num:314-291-0525
CAGE:60021
=== Contractor Identification ===
Company:M-R PLASTICS AND COATINGS INC
Address:2494 ADIE RD
Box:City:MARYLAND HEIGHTS
State:MO
ZIP:63043-3504
Country:US
CAGE:60021
============= Composition/Information on Ingredients =============
Name:FREE TOLUENE DILSOLYANATE
CAS:76-75-5
RTECS #:CQ6300000
Fraction by Wt: 0.3%
ACGIH TLV:0.01 PPM
Name:AROMATIC HYDROCARBONS
Fraction by Wt: 7%
ACGIH TLV:100 PPM
Name:ALIPHATIC HYDROCARBONS
Fraction by Wt: 15%
ACGIH TLV:200 PPM
Name:ETHER-ESTER ACETATE
Fraction by Wt: 42%
ACGIH TLV:100 PPM
===================== Hazards Identification =====================
Effects of Overexposure:SKIN,EYE,MUCOUS,AND UPPER RESPIRATORY TRACT
IRRIATANT
======================= First Aid Measures =======================
First Aid:SKIN-WASH WITH SOAP AND WATER.EYE-FLUSH WITH WATER FOR AT
LEAST FIFTEEN MIN.INHALATION-REMOVE TO FRESH AIR.INGESTION-DO NOT
INDUCE VOMITING.CALL DOCTOR IMMEDIATELY.
===================== Fire Fighting Measures =====================
Flash Point:92F. 33C CC
Lower Limits:1.0
Upper Limits:8.0
Extinguishing Media:CO*2. FOAM,DRY MOZZLES TO COOL CONTAINERS
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION.AVOID BREATHING
VAPOR.VENTILATE AREA.FLUSH WITH WATER.REMOVE WITH
INERT,ABSORBENT,NON-SPARKING TOOLS
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE ABOVE 120F.49C AVOID
FLAMES AND SPARK SOURCES.AVOID SPLASH POURING.PROVIDE ADEQUATE
VENTILATION
Other Precautions:GROUN CONTAINERS WHEN POURING
============= Exposure Controls/Personal Protection =============
Respiratory Protection:ORGANIC CANISTER MASK OR AIR PACK
Ventilation:LOCAL EXHAUST
Protective Gloves:YES
Eye Protection:GOGGLES
Other Protective Equipment:TO PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING
Supplemental Safety and Health
VENTILATION WITH APPROVED CLASS D EXPLOSION PROOF MOTORS AND SWITHES
================== Physical/Chemical Properties ==================
HCC:F3
Boiling Pt:B.P. Text:285F.41C
Vapor Pres:8
Spec Gravity:0.978
Evaporation Rate & Reference:< BOTYL ACETATE
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR LIQUID SOLVENT
Percent Volatiles by Volume:69
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AMINES OR BASIC COMPOUNDS
Stability Condition to Avoid:HEAT,FLAME OR OXIDIZING MATERIALS
Hazardous Decomposition Products:CO AND CO*2 BY THERMAL DECOMPOSITION
Conditions to Avoid Polymerization:HEAT,FLAME OR OXIDIZING MATERIALS
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATION ACCORDING TO AIR POLLUTION
REGULATIONS.DO NOT INCINERATE IN CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|