=====================  Product Identification  =====================

MSDS NAME:SCOTCHWELD 2216A ADHESIVE (TRANSLUCENT)
NIIN:01-011-8624
Kit Part:Y
MSDS Number: BGDFR
=== Responsible Party ===
Company:3M COMPANY-ADHESIVES,COATINGS & SEALERS DIV
Emergency Phone Num:612-733-1110 (OP55)
CAGE:04963
=== Contractor Identification ===
Company:3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Address:3M CTR
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:800-364-3577/651-737-6501(24 HOURS)
CAGE:04963

=============  Composition/Information on Ingredients  =============

Name:ALIPHATIC AMINE
Fraction by Wt: 61.0%

=====================  Hazards Identification  =====================

Effects of Overexposure:EYE:EXTR IRRT MAY CAUSE PERM EYE
    DAMAGE.SKN:IRRT & SENS.INHL:IRRT.INGES:IRRT GI TRACT.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH COPIOUSLY WATER 10 MIN. SKN:THOROUGH WASH SOAP &
    WATER. INH:REMOVE TO FRESH AIR. INGES: DRINK TWO GLASSES MILK OR
    WATER. CALL PHYSICIAN. INDUCE VOMITING.

=====================  Fire Fighting Measures  =====================

Flash Point:>200F CC
Extinguishing Media:CO2, FOAM, DRY CHEMICAL, WATER
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA, COLLECT SPILLED MATERIAL.
    CLEANUP RESIDUE,PLACE IN APPROVED METAL CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID CONTACT WITH EYE & SKIN. AVOID
    INHL OR EYE CONTACT WITH DUST FROM GRINDING OPERATIONS. WASH
    CONTAMINATED CLOTHING BEFORE REUSE.
Other Precautions:VENT CURING OVENS TO OUTDOORS. KEEP CONTAINERS
    CLOSED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
    VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:SCBA IN FIRE. USE DUST MASK WHEN GRINDING
    CURED RESIN.
Supplemental Safety and Health
PART A OF TWO PART KIT.  BASIS:  MSDS DTD 1 NOV 85 (OSHA HAZCOMSTD), 3M
    DOCUMENT 1031731. 3M GENERIC  P/N IS 62-3608-XXXX-X.  KIT ALSO
    KNOWN AS 2216B/A OR 3M EC2216B/A (TRANSLUCENT).  KEY1:N1.

==================  Physical/Chemical Properties  ==================

HCC:N1
Spec Gravity:0.97
Viscosity:7000 CP
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER PASTE
Percent Volatiles by Volume:0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2, N, SMOKE PARTICLES ON
    EXPOSURE EXCESS HEAT OR FLAME

====================  Disposal Considerations  ====================

Waste Disposal Methods:OBSERVE ALL APPLICABLE REGS BEFORE DISPOSAL.
    CURED RESIN (A&C):DISPOSE IN SAN LANDFILL. SPILL: DISPOSE OF
    CLEANUP MATL BY INCINERATION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***