=====================  Product Identification  =====================

MSDS NAME:SCOTCHWELD 2216B ADHESIVE (TRANSLUCENT)
NIIN:01-011-8624
Kit Part:Y
MSDS Number: BGDFS
=== Responsible Party ===
Company:3M COMPANY - ADHESIVES, COATINGS, SEALERS DIV
Emergency Phone Num:612-733-1110 (OP55)
CAGE:04963
=== Contractor Identification ===
Company:3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Address:3M CTR
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:800-364-3577/651-737-6501(24 HOURS)
CAGE:04963

=============  Composition/Information on Ingredients  =============

Name:BISPHENOL A-EPICHLOROHYDRIN RESIN
Fraction by Wt: 100%

=====================  Hazards Identification  =====================

Effects of Overexposure:SKN:MAY IRRT W/PROLONGED CONTACT.MAY
    SENSITIZE.INHL:MAY IRRT.INGES:POSSIBLE GI TRACT IRRT.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/WATER 10 MIN & CALL PHYS. SKN:THORO WASH SOAP &
    WATER.INHL:REMOVE TO FRESH AIR.INGES:CONSIDERED NON TOXIC.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:CO2,FOAM,DRY CHEMICAL,WATER
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:OBSERVE ALL PRECAUTIONS, VENTILATE AREA.
    COLLECT SPILLAGE, CLEANUP RESIDUE, PLACE IN METAL CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID CONTACT WITH EYE OR SKIN. AVOID
    INHL OR EYE CONTACT WITH DUST FROM GRINDING OPERATIONS. WASH
    CONTAMINATED CLOTHING BEFORE REUSE.
Other Precautions:VENT CURING OVENS TO OUTDOORS. KEEP CONTAINERS
    CLOSED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
    VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:SCBA IN FIRE. USE DUST MASK WHEN GRINDING
    CURED RESIN
Supplemental Safety and Health
PART B OF TWO-PART KIT.  BASIS:MSDS DTD 1 NOV 86 (OSHA HAZCOMSTD), 3M
    DOCUMENT 1031715. 3M GENERIC P/N IS 62-3508-XXXX-X.  KIT ALSO KNOWN
    AS 2216B/A OR 3M EC2216B/A (TRANSLUCENT, OR CLEAR AMBER).  KEY
    1:N1.

==================  Physical/Chemical Properties  ==================

HCC:N1
Spec Gravity:1.17
Viscosity:14000 CP
Solubility in Water:INSOL
Appearance and Odor:TRANSPARENT LIQUID
Percent Volatiles by Volume:0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO2,CO,N, & SMOKE PARTICULATES WHEN
    EXP EXCESS HEAT,FLAME.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CHECK ALL APPL REGS. CURED RESIN MAY BE DISPOSED
    IN SAN LANDFILL. SPILL: DISPOSE OF CLEANUP MATL BY INCINERATION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***