=====================  Product Identification  =====================

MSDS NAME:CARRIAGE FLAT ACRYLIC HOUSE PAINT/#24 BLAC
NIIN:00F004270
MSDS Number: BBPWR
=== Responsible Party ===
Company:BRUNING PAINT/BALTIMORE, MD 21224
Emergency Phone Num:(301) 342-3641
CAGE:EO841
=== Contractor Identification ===
Company:BRUNING PAINT/BALTIMORE, MD 21224
CAGE:EO841
Company:KYANIZE PAINT
Address:601 S HAVEN ST
Box:City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-368-2076
CAGE:85520

=============  Composition/Information on Ingredients  =============

Name:SILICON DIOXIDE
RTECS #:VV7320000
Fraction by Wt: 35%
ACGIH TLV:.10 MG/CUM

Name:ETHYLENE GLYCOL  (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 1-5%
OSHA PEL:C 50 PPM
ACGIH TLV:C 50 PPM,VAPOR; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

Effects of Overexposure:CONTACT WITH EYES OR SKIN MAY CAUSE IRRITATION.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/WATER FOR AT
    LEAST 15 MINUTES. SKIN: REMOVE WITH SOAP/WATER. REMOVE CONTAMINATED
    CLOTHING. INGESTION: DRINK 1 OR 2 GLASSES OF WATER. DON'T INDUCE
    VOMITIN G, CONSULT PHYSICIAN IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Fire Fighting Procedures:WATER COOL CONTAINERS TO PREVENT PRESSURE
    BUILDUP/EXPLOSION.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE DUE TO
    PRESSURE BUILD-UP WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DIKE/ABSORB SPILL WITH INERT MATERIAL
    (SAND/VERMICULITE, ETC). AND TRANSFER TO CONTAER FOR DISPOSAL. WASH
    UP RESIDUE WITH SOAP AND WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP FROM FREEZING. DON'T STORE >120F.
Other Precautions:CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF REACH OF
    CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:APPROVED MECH FILTER RESP TO REMOVE SOLID
    AIRBORNE OF OVERSPRAY
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES/SAFETY EYEWEAR
Other Protective Equipment:USE PETROLEUM JELLY WHERE PROLONGED SKIN
    CONTACT IS LIKELY.
Supplemental Safety and Health
MSDS DATE: 20 AUG 86. WT/GAL: 10.6.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:490F
Vapor Pres:.08
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN BU AC
Percent Volatiles by Volume:62.4

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CO AND CO2 WHEN BURNED.

====================  Disposal Considerations  ====================

Waste Disposal Methods:LANDFILL ACCORDING TO FEDERAL, STATE AND LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***