===================== Product Identification =====================
MSDS NAME:ROLLER PEN, BLACK, INK NO: 5061-5038
NIIN:00F004247
MSDS Number: BBPVN
=== Responsible Party ===
Company:HEWLETT PACKARD/PALO, CA 94307
Emergency Phone Num:(415) 857-2767
CAGE:EO832
=== Contractor Identification ===
Company:HEWLETT PACKARD/PALO, CA 94307
CAGE:EO832
Company:HEWLETT-PACKARD CO, CORPORATE HQ
Address:3000 MINUTEMAN RD
Box:City:ANDOVER
State:MA
ZIP:01810-1032
Country:US
Phone:404-648-8754/FAX: 800-947-3299
CAGE:28480
============= Composition/Information on Ingredients =============
Name:FORMAMIDE
CAS:75-12-7
RTECS #:LQ0525000
Fraction by Wt: 55%
OSHA PEL:20 PPM/30 STEL
ACGIH TLV:S, 10 PPM; 9192
Name:ISOOCTYLPHENOXYPOLYETHOXYETHANOL
Fraction by Wt: <0.1%
Name:DYES
Fraction by Wt: 10%
===================== Hazards Identification =====================
Effects of Overexposure:CONTACT WITH SKIN OR EYES MAY CAUSE MINOR
IRRITATION.
======================= First Aid Measures =======================
First Aid:SKIN: WASH AFFECTED AREA WITH SOAP AND WATER. EYES: FLUSH
WITH COPIOUS AMOUNTS OF WATER FOR 15 MINUTES.
===================== Fire Fighting Measures =====================
Flash Point:>250FC (COC)
Extinguishing Media:DRY CHEMICAL OR CO2
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:WIPE UP MATERIAL WITH ABSORBENT TOWEL, FLUSH
AREA WITH WATER.
_
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID CONTACT W/EYE/SKIN/CLOTHING.
RAPID REMOVAL OF INK W/SOAP/WATER FROM CLOTHING/SKIN PREVEN
STAINING/IRRITATION.
Other Precautions:FORMAMIDE, IF REPEATEDLY INGESTED, INHALED, OR
ABSORBED THROUGH SKIN MAY CAUSE FETAL MALFORMATIONS. LARGE AMOUNTS
CAUSING ILESS OF THE MOTHER MAY CAUSE FETAL DEATH.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE FOR NORMAL USE.
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Supplemental Safety and Health
MSDS DATE: 09 SEPT 82.
================== Physical/Chemical Properties ==================
Spec Gravity:1.12
Solubility in Water:COMPLETE
Appearance and Odor:BLACK LIQUID, SLIGHT AMMONIA ODOR.
Percent Volatiles by Volume:<1%
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:AMMONIA AND CO
==================== Disposal Considerations ====================
Waste Disposal Methods:TREAT AS AN ORGANIC SOLVENT. ALL DISPOSAL MUST
BE IN ACCORDANCE WITH APPLICABLE FEDERAL, STATE AND LOCAL AIR AND
WATER POLUTION REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|