=====================  Product Identification  =====================

MSDS NAME:ENAMEL ALKYD GLOSS BLUE 15045, #742506
NIIN:00F004245
MSDS Number: BBPVK
=== Responsible Party ===
Company:PRATT & LAMBERT/WICHITA, KS 67201
Emergency Phone Num:(316) 733-1361
CAGE:EO743
=== Contractor Identification ===
Company:PRATT & LAMBERT/ANDOVER, KANSAS 67002
Box:2153
CAGE:EO743
Company:PRATT AND LAMBERT INC
Address:945 BURLINGTON
Box:206
City:KANSAS CITY
State:MO
ZIP:64141
Country:US
CAGE:92216

=============  Composition/Information on Ingredients  =============

Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
OSHA PEL:100 PPM

Name:XYLENES (O-,M-,P- ISOMERS)	(SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:LEAD CHROMATE (OSHA PEL FOR LEAD FROM 29CFR
    1910.1025),(CRO3 CEILING 0.1 MG/M3)
CAS:7758-97-6
RTECS #:GB2975000
OSHA PEL:0.05 MG/M3 (PB)
ACGIH TLV:0.05MG/M3(CR)A2;8990

=====================  Hazards Identification  =====================

Effects of
    Overexposure:HEADACHE/DIZZINESS/CONFUSION/NAUSEA/UNCONSCIOUSNESS/EV
    EN ASPHYXIATION. SKIN/EYE: IRRITATION.

=======================  First Aid Measures  =======================

First Aid:IF SWALLOWED: CALL PHYS. INHALATION: REMOVE TO FRESH AIR. IF
    BREATHING HAS STOPPED, GIVE ARTIFICIAL RESP. EYE: FLUSH W/WATER FOR
    AT LEAST 15 MINUTES. SKIN: REMOVE CONTAMINATED CLOTHING. WASH
    AFFECTED  AREA WITH SOAP/WATER. OBTAIN MED ATT.

=====================  Fire Fighting Measures  =====================

Flash Point:80F
Extinguishing Media:CO2, DRY CHEMICAL OR ALCOHOL FOAM
Fire Fighting Procedures:WEAR SCBA. WATER TO COOL CONTAINERS TO PREVENT
    PRESS BUILDUP
Unusual Fire/Explosion Hazard:KEEP CONTAINERS CLOSED. CLOSED CONTAINERS
    MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES (FLAMES/HOT
    SURFACES/SOURCES OF ELECTRICAL/STATIC/FRIIONAL SPARKS).
    DIKE/CONTAIN SPILL W/INERT MATERIAL (E.G./SAND/EARTH). PLE
    ABSORBENT DIKING MATERIALS IN COVERED META L CONTAINERS FOR
    DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE >95F. DON'T TAKE
    INTERNALLY. CLOSE CONTAINER AFTER EACH USE. DON'T BREATHE
    SANDINGUST. WASH HANDS/FACE BEFORE EATING OR SMOKING.
Other Precautions:EMPTY CONTAINERS SHOULD BE GROUNDED/BONDED TO THE
    RECEIVING CONTAINER. DON'T WELD, BRAZE OR CUT ON EMPTY CONTAINER.
    NEVER USPRESSURE TO EMPTY. DRUM ISN'T A PRESSURE VESSEL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN CONFINED AREAS USE A NIOSH APPROVED
    AIR-SUPPLIED RESPIRATOR
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV
Protective Gloves:IMPERMEABLE
Eye Protection:WEAR FACE SHIELD
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Supplemental Safety and Health
MSDS DATE: 17 SEPT 86. WT/GAL: 7.6.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:193F-395F
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:62%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
    IGNITION.
Hazardous Decomposition Products:SMOKE/CO/CO2/OXIDES OF LEAD
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT SPARKS AND
    FLAME.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL/STATE/LOCAL
    LAWS. CONTAMINATED ABSORBANT MAY BE DISPOSED IN EPA-PERMITTED
    HAZARDOUS WASTE LANDFILLS. DON'T INCINERATE CLOSED CONTAINERS.
    OBSERVE PRECAUTIONS FOR DISP OSAL OF FLAMMABLE MATERIALS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***