=====================  Product Identification  =====================

MSDS NAME:MORALUBE MOTOR OIL, GRADE 10
NIIN:01-040-2236
MSDS Number: BGHBK
=== Responsible Party ===
Company:MORAINE INDUSTRIES INC.
Emergency Phone Num:(414) 567-7523
CAGE:KO039
=== Contractor Identification ===
Company:MORAINE INDUSTRIES INC.
CAGE:KO039
Company:MORAINE OIL CO INC
Address:1212 W 2ND ST
Box:678
City:OCONOMOWOC
State:WI
ZIP:53066
Country:US
Phone:414-567-7523
CAGE:2K440

=============  Composition/Information on Ingredients  =============

Name:MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS:8012-95-1
RTECS #:PY8030000
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3/10 STEL;9192

Name:DETERGENTS

=====================  Hazards Identification  =====================

Effects of Overexposure:LOW TOXICITY MAY CAUSE MILD SKIN IRRIT ON
    REPEATED/PROLONGED CNTCT. MAY CAUSE EYE BURNS.

=======================  First Aid Measures  =======================

First Aid:IN CASE OF SKIN CNTCT, WASH THOROUGHLY W/SOAP & WATER. IF
    SPLASHED INTO EYES. FLUSH W/CLEAR WATER FOR AT LEAST 15 MIN OR
    UNTIL IRRIT SUBSIDES. CALL MD.

=====================  Fire Fighting Measures  =====================

Flash Point:440F COC
Lower Limits:1
Upper Limits:6
Extinguishing Media:FOAM, DRY CHEM, CO*2, WATER SPRAY, FOG
Fire Fighting Procedures:USE AIR-SUPP EQUIP IN ENCL AREA. WATER-COOL
    EXPOSED CNTNRS.
Unusual Fire/Explosion Hazard:AVOID BRTHNG VAPOR OR FUMES. DO NOT MIX
    OR STORE W/STRONG OXIDANTS LIKE LIQ CL OR CONC OXYGEN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:RECOVER FREE LIQ. ADD ABSORBENT TO SPILL AREA.
    KEEP PROD OUT OF SEWERS & WATERCOURSES BY DIKING OR IMPOUNDING.
    ADVISE AUTH IF PROD HAS OR MAY ENTER SEWERS, WATERCOURSES &
    EXTENSVE LAND AREAS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CNTNRS CLOSED WHEN NOT IN USE. DO
    NOT HANDLE OR STORE NEAR HEAT, SPARKS, FLAME OR STRONG OXIDANTS.
Other Precautions:AVOID BRTHNG OIL MIST. REMOVE OIL-SOAKED CLOTHING &
    LAUNDER BEFORE REUSE. DISCARD OIL-SOAKED SHOES. WASH THOROUGHLY
    AFTER CNTCT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORM NEEDED. IN CONFINED OR ENCLOSED AREA
    USE NIOSH/MSHA APP.
Ventilation:LOCAL EXH TO CAPTURE FUMES & VAPORS
Protective Gloves:CHEM RESIST
Eye Protection:SPLASH GOGGLES, FACE SHLD
Other Protective Equipment:USE CHEM RESIST APRON OR CLOTHING TO AVOID
    PROLONGED CNTCT
Supplemental Safety and Health
VAPOR PRESS <5MMHG. VAP DENSITY>1.PERCENT VOLATILE-NEGLIGIBLE. CONFORMS
    TO MIL-L-2104C.

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:500-900F
Spec Gravity:0.89
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK AMBER COLORED LIQ, MILD HYDROCARBON ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS, LIQ CL, CONC OXYGEN. NA OR CA HYPOCHLORITE.
Hazardous Decomposition Products:FUMES, SMOKE, CO, SOX, IN THE CASE OF
    INCOMPLETE COMBUSTION

====================  Disposal Considerations  ====================

Waste Disposal Methods:ASSURE CONFORMITY W/APPLICABLE DISPOSAL REG.
    DISPOSE OF ABSORBED MATL AT APPRVD WASTE DISPOSAL SITE OR FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***