=====================  Product Identification  =====================

MSDS NAME:12478 S-3 MOTOR OIL, 10 GRADE
NIIN:01-040-2236
MSDS Number: BGHBL
=== Responsible Party ===
Company:EXXON COMPANY,U.S.A.
Emergency Phone Num:(713) 656-3424
CAGE:EO384
=== Contractor Identification ===
Company:EXXON COMPANY U.S.A.
Box:2180
City:HOUSTON
State:TX
ZIP:77252-2180
Country:US
Phone:713-656-5949 / 713-656-3424
CAGE:29700
Company:EXXON COMPANY,U.S.A.
Address:800 BELL ST
Box:2180
City:HOUSTON
State:TX
ZIP:77252-2180
Country:US
Phone:713-870-6000
CAGE:EO384

=============  Composition/Information on Ingredients  =============

Name:PETROLEUM LUBRICATING BASE OIL
Fraction by Wt: 90%

Name:DETERGENT INHIBITOR PACKAGE
Fraction by Wt: <10%

=====================  Hazards Identification  =====================

Effects of Overexposure:PROLONGED OR REPEATED SKIN CONTACT MAY CAUSE
    MILD SKIN IRRITATION

=======================  First Aid Measures  =======================

First Aid:SKIN:WASH THOROUGHLY W/SOAP & WARM WATER.EYES:IF
    SPLASHED,FLUSH W/CLEAR WATER FOR 15 MIN OR UNTIL IRRITATION
    SUBSIDES.

=====================  Fire Fighting Measures  =====================

Flash Point:450F COC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:FOAM,DRY CHEMICAL,CO*2,OR WATER FOG OR SPRAY
Fire Fighting Procedures:COOL EXPOS CANS W/WATER SPRAY.AIR-SUP EQUIP IN
    ENCL AREAS
Unusual Fire/Explosion Hazard:DO NOT MIX OR STORE W/STRONG OXIDANTS
    LIKE LIQUID CHLORINE OR CONC OXYGEN

==================  Accidental Release Measures  ==================

Spill Release Procedures:RECOVER FREE LIQUID.ADD ABSORBENT
    (SAND,EARTH,SAWDUST,ETC)TO SPILL AREA.KEEP PETROLEUM PRODUCTS OUT
    OF SEWERS & WATERCOURSES BY DIKING OR IMPOUNDING.ADVISE AUTHORITIES
    IF PRODUCT HAS ENTERED OR MAY EN TER SEWERS,WATERCOURSES,EXTENSIVE
    LAND AREA

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
    USE.DO NOT HANDLE OR STORE NEAR HEAT,SPARKS,FLAME OR STRONG
    OXIDANTS.
Other Precautions:AVOID BREATHING OIL MIST.REMOVE OIL SOAKED CLOTHING &
    LAUNDER BEFORE RE-USE.DISCARD OIL-SOAKED SHOES.WASH SKIN THOROUGHLY
    W/SOAP & WATER AFTER HANDLING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPRVD AIR-SUPPLIED RESP PROT IF
    NEEDED FOR ENCL SPACES
Ventilation:LOCAL EXHST FOR FUMES.PROVIDE >60FPM HOOD/FACE VELO IF ENCL
Protective Gloves:CHEM RESIST
Eye Protection:SPLASH GOG OR FACE SHIELD
Other Protective Equipment:USE CHEMICAL RESISTANT APRON OR OTHER
    CLOTHING TO PROT SKIN
Supplemental Safety and Health
MFR RECM TLV OF 5MG/CUM FOR OIL MIST.CONTAINER SIZE: 1 GAL.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:750F
Vapor Density:>12
Spec Gravity:0.89
Evaporation Rate & Reference:<0.01 (N-BU AC)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK AMBER LIQUID.MILD PETROLEUM ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS LIKE:LIQ CHLORINE,CONC O*2,CA HYPOCHLORITE
Hazardous Decomposition Products:FUMES,SMOKE,CO & SULFUR OXIDES IN CASE
    OF INCMPLT COMBUST

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE AT APPROVED FACILITY IAW FED,STATE &
    LOCAL CODES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***