=====================  Product Identification  =====================

MSDS NAME:D-70 DEVELOPER
NIIN:01-265-2743
MSDS Number: BGTBG
=== Responsible Party ===
Company:MET-L-CHEK COMPANY
Address:1639 EUCLID STREET
City:SANTA MONICA
State:CA
ZIP:90404-3770
Country:US
Info Phone Num:213-450-1111
Emergency Phone Num:213-450-1111
CAGE:98733
=== Contractor Identification ===
Company:MET-L-CHEK COMPANY
Address:1639 EUCLID ST
Box:00000
City:SANTA MONICA
State:CA
ZIP:90404
Country:US
Phone:310-450-1111/FAX 310452-4046
CAGE:98733

=============  Composition/Information on Ingredients  =============

Name:ISOPROPYL ALCOHOL  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192

Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192

Name:SILICA, CRYSTALLINE - FUSED
CAS:60676-86-0
RTECS #:VV7328000
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293

Name:ALPHA-ALUMINA (ALUMINUM OXIDE)  (EPA LISTS ONLY FIBROUS
    FORMS)  (SARA III)
CAS:1344-28-1
RTECS #:BD1200000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:PER MANUFACTURER,MAY CAUSE SLIGHT
    IRRITATION TO SKIN ON CONTACT AND RESPIRATORY TRACT SYSTEM.
Explanation of Carcinogenicity:CARCINOGENICITY OF THE PRODUCT FOR OSHA
    REQUIREMENTS IS SPECIFIED "YES" BY THE MFR,BUT DID NOT SPECIFIED
    THE COMPONENT.
Effects of Overexposure:EYES:PRESUMED NON-IRRITATING;SKIN:SLIGHT
    IRRITATION ON LIQUID CONTACT;INHALATION:VAPORS OR OIL MIST MAY
    CAUSE MILD IRRITATION OF UPPER RESPIRATORY TRACT;INGESTION:NOT
    KNOWN TO MANUFACTURER.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN AND RESPIRATORY
    DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT.

=======================  First Aid Measures  =======================

Eyes:FLUSH WITH WATER.GET MEDICAL HELP IF IRRITATION OCCURS
    OR PERSISTS; SKIN:FLUSH WITH WATER.WASH WITH WATER & SOAP.GET MED
    ATTN FOR PERSISTING IRRITATION; INHALATION:REMOVE TO FRESH
    AIR.PROVIDE OXY GEN IF BREATHING IS DIFFICULT,GET MED ATTN IF
    NEEDED; INGESTION:INDUCE VOMITING. GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:53F (11.6C)
Lower Limits:2
Upper Limits:12
Extinguishing Media:WATER FOG,DRY CHEMICAL,CARBON DIOXIDE OR FOAM; DO
    NOT USE DIRECT STREAM OF WATER.
Fire Fighting Procedures:IN CONFINED AREA,DO NOT ENTER WITHOUT A FULL
    BUNKER GEAR INCLUDING A POSITIVE PRESSURE NIOSH APPROVED
    SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:EXPOSED CONTAINERS MAY RUPTURE OR EXPLODE
    IN HEAT OF FIRE DUE TO BUILDUP IN VAPOR PRESSURE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIM IGNITION SOURCES.WEAR APPROPRIATE
    PROTECTIVE CLOTHING & RESPIRATOR.DIKE & TRANSFER LIQ TO A SALVAGE
    TANK.SOAK UP RESIDUE WITH ABSORBENT CLAY,SAND OR OTHR MATL.PLACE
    RAGS & ABSORBED WASTE MATERL I N COVERED NON-LEAKING CONTAINERS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT/IGNITION
    SOURCES.STORE IN DRY,COOL & VENTILATED LOCATION.DO NOT STORE NEAR
    OXIDIZING MATERIAL.AVOID PHYSICAL DAMAGE TO CANS.
Other Precautions:MINIMIZE SKIN CONTACT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR IF EXPOSURE
    EXCEEDS TLV LIMITS.
Ventilation:PER MFR,EXPLOSION PROOF TO MAINTAIN TLV.
Protective Gloves:CHEMICAL RESISTANT.
Eye Protection:GOGGLES.
Other Protective Equipment:EYE WASH FOUNTAINS AND SAFETY SHOWERS.
Work Hygienic Practices:WASH WITH SOAP & WATER BEFORE
    EATING,DRINKING,SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
NSN FOR TYPE II,FORM D DEVELOPER OF MIL-I-25135D;QPL-25135-15 SPECIFIED
    THAT 3 DEVELOPERS ARE QUALIFIED DEVELOPER UNDER TYPE II,FORM D OF
    MET-L-CHEK COMPANY;THE MFR MAY SUPPLY ONE OF THE FOLLOWING:(1) 
    D-70, (2) D-701, OR (3) D-703 DEVELOPER.THIS ENTRY IS OF D-70
    DEVELOPER.THIS PRODUCT IS NOT ALLOWED IN AEROSOL CANS.

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:=82.2C, 180.F
Vapor Pres:33@68F
Vapor Density:2.1
Spec Gravity:0.8
Evaporation Rate & Reference:1.4(BUTYL ACETATE)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE,MILKY SUSPENSION,MILD ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL.
Stability Condition to Avoid:HEAT & IGNITION SOURCES.
Hazardous Decomposition Products:CARBON MONOXIDE & OTHER UNIDENTIFIED
    ORGANIC COMPOUNDS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF AS EPA HAZARDOUS WASTE
    #D001,IGNITABLE WASTE.PLACE WASTE MATERIAL IN AN APPROPRIATE
    DISPOSAL FACILITY, OR DISPOSE OF IN COMPLIANCE WITH FEDERAL,STATE &
    LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***