=====================  Product Identification  =====================

MSDS NAME:327361 GASKET ELIMINATOR/FLANGE SEALANT
NIIN:01-099-9384
MSDS Number: BGXBZ
=== Responsible Party ===
Company:OUTBOARD MARINE CORP
Address:100 SEA HORSE DRIVE
City:WAUKEGAN
State:IL
ZIP:60085-2141
Country:US
Info Phone Num:312-689-5599
Emergency Phone Num:312-689-5599
CAGE:80256
=== Contractor Identification ===
Company:OUTBOARD MARINE CORP
Address:100 SEA HORSE DRIVE
Box:City:WAUKEGAN
State:IL
ZIP:60085-2141
Country:US
Phone:708-689-6200
CAGE:80256

=============  Composition/Information on Ingredients  =============

Name:POLYURETHANE METHACRYLATE RESINS
Fraction by Wt: 70-75%
Other REC Limits:NONE STATED
OSHA PEL:NONE ESTABLISHED
ACGIH TLV:NONE ESTABLISHED

Name:POLYGLYCOL DIMETHACRYLATES
Fraction by Wt: 5-10%
Other REC Limits:NONE STATED
OSHA PEL:NONE ESTABLISHED
ACGIH TLV:NONE ESTABLISHED

Name:SILICA (TYPE NOT SPECIFIED)
Fraction by Wt: 5-10%
Other REC Limits:NONE STATED
OSHA PEL:NONE ESTABLISHED
ACGIH TLV:NONE ESTABLISHED

Name:ACRYLIC ACID  (SARA III)
CAS:79-10-7
RTECS #:AS4375000
Fraction by Wt: 5%
OSHA PEL:S, 10 PPM
ACGIH TLV:S, 2 PPM; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:ORGANIC HYDROPEROXIDE
Fraction by Wt: 3%
Other REC Limits:NONE STATED
OSHA PEL:NONE ESTABLISHED
ACGIH TLV:NONE ESTABLISHED

Name:ETHYLENE GLYCOL  (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 2%
OSHA PEL:C 50 PPM
ACGIH TLV:C 50 PPM,VAPOR; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:SULFIMIDE
Fraction by Wt: 1%
Other REC Limits:NONE STATED
OSHA PEL:NONE ESTABLISHED
ACGIH TLV:NONE ESTABLISHED

Name:METHYL ALCOHOL (METHANOL)  (SARA III)
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: 1%
OSHA PEL:S,200PPM/250STEL
ACGIH TLV:S,200PPM/250STEL; 93
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:HYDRAZIDE
Fraction by Wt: 1%
Other REC Limits:NONE STATED
OSHA PEL:NONE ESTABLISHED
ACGIH TLV:NONE ESTABLISHED

Name:HYDROQUINONE  (SARA III)
CAS:123-31-9
RTECS #:MX3500000
Fraction by Wt: 7% PPM
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:HIGH LEVELS OF ACRYLIC ACID CAUSE NOSE
    AND THROAT IRRITATION. SEALANT IS AN EYE IRRITANT. MAY CAUSE
    DERMATITIS ON PROLONGED CONTACT IN SENSITIVE INDIVIDUALS.
Effects of Overexposure:SEE "HEALTH HAZARDS"

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH PLENTY OF WATER FOR 15 MINUTES.SEE DOCTOR.
    SKIN:WASH WITH SOAP AND WATER; INHALATION: REMOVE VICTIM TO FRESH
    AIR; INGESTION:KEEP CALM AND OBTAIN MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:>200F/93.3C
Extinguishing Media:CARBON DIOXIDE,FOAM OR DRY CHEMICAL.
Fire Fighting Procedures:NONE STATED
Unusual Fire/Explosion Hazard:NONE STATED

==================  Accidental Release Measures  ==================

Spill Release Procedures:SCRAPE UP AS MUCH AS POSSIBLE AND SCORE IN A
    PARTIALLY-FILLED CLOSED CONTAINER UNTIL DISPOSAL. RESIDUES MAY BE
    CLEANED WITH SOLVENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
    PLACE,AWAY FROM HEAT,IGNITION SOURCES AND INCOMPATIBLE
    MATERIALS.KEEP CONTAINERS CLOSED WHEN NOT IN USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE USUALLY REQUIRED.
Ventilation:SUFFICIENT MECHANICAL (GENERAL) AND/OR LOCAL EXHAUST
    VENTILATION TO MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS.
Work Hygienic Practices:AVOID CONTACT WITH EYES & SKIN.DO NOT BREATHE
    VAPORS.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:>300F/1489C
Vapor Pres:5
Spec Gravity:1.1
Solubility in Water:LOW
Appearance and Odor:RED GEL WITH MILD ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
WILL ATTACK SOME THERMOPLASTICS.
Stability Condition to Avoid:NONE STATED
Hazardous Decomposition Products:NONE STATED

====================  Disposal Considerations  ====================

Waste Disposal Methods:LANDFILL OR INCINERATE FOLLOWING ALL APPLICABLE
    FEDERAL, STATE AND LOCAL ENVIRONMENTAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***