===================== Product Identification =====================
MSDS NAME:ADIPRENE M-400/-415/-467/-483/AP-R5333
NIIN:00F004984
MSDS Number: BBRMC
=== Responsible Party ===
Company:UNIROYAL CHEMICAL CO/NAUGATUCK, CONN 06770
Emergency Phone Num:(203) 723-3670
CAGE:21312
=== Contractor Identification ===
Company:UNIROYAL CHEMICAL CO/NAUGATUCK, CONN 06770
CAGE:21312
============= Composition/Information on Ingredients =============
Name:REACTION PRODUCT OF A POLYETHER
Name:METHYLENE BISPHENYL ISOCYANATE (MDI) (SARA III)
CAS:101-68-8
RTECS #:NQ9350000
OSHA PEL:C, 0.02 PPM
ACGIH TLV:0.005 PPM; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
===================== Hazards Identification =====================
Effects of Overexposure:POTENTIAL SKIN, EYE & RESPIRATORY IRRITANT.
======================= First Aid Measures =======================
First Aid:EYE CONTACT, FLUSH W/WATER FOR 15 MINS, GET MED ATT. SKIN
EXPOSURE, WIPE OFF EXCESS MATERIAL, WASH W/RUBBING
ALCOHOL/SOAP/WATER. IF REDNESS OR IRRITATION PERSIST, GET MED ATT.
INHALATION MOVE TO FRESH AIR, GET MED ATT. WASH CLOTHING
BEFOREREUSE.
===================== Fire Fighting Measures =====================
Flash Point:350F CC
Extinguishing Media:WATER SPRAY, CO2, DRY CHEMICAL
Fire Fighting Procedures:PROTECT AGAINST CYANATE
VAPORS/DECOMP/COMBUSTION PRODUCTS.
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:ABSORB ON INERT MATERIAL. TRANSFER TO OPEN
CONTAINERS OUTSIDE OR IN WELL-VENTILATED EA. SOAK WITH DILUTE
AMMONIA HYDROXIDE OR WATER-ALCOHOL MIXTURE. ALLOW TE FOR REACTION
TO BE COMPLETE BEFORE DISPOSA L.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AWAY FROM SOURCES OF DIRECT
HEAT/MOISTURE. SEAL CONTAINERS W/A DRY NITROGEN BLANKET/KEEPLOSED
WHEN NOT IN USE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IN THE ABSENCE OF GOOD VENT OR FOR HIGH
CONCENTRATIONS
Ventilation:LOCAL EXHAUST VENTILATION RECOMMENDED.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:AVOID ALL CONTACT WITH EYES, SKIN &
CLOTHING.
Supplemental Safety and Health
MSDS DATE: 01/05/84.
================== Physical/Chemical Properties ==================
Spec Gravity:1.09
Solubility in Water:SOLUBLE
Appearance and Odor:CLEAR TO SLIGHTLY CLOUDLY LIQUID; SLIGHT ODOR
Percent Volatiles by Volume:LOW
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID CONTAMINATION W/WATER/STRONG OXIDIZERS/ALCOHOLS/AMINES
Stability Condition to Avoid:HIGH TEMP
_
Hazardous Decomposition Products:HIGH TEMPS WILL RELEASE
CYANATES/HYDROCARBONS.
Conditions to Avoid Polymerization:UNDER BURNING CONDITIONS-OXIDES OF
CARBON/NITROGEN/HCN.
==================== Disposal Considerations ====================
Waste Disposal Methods:IN ACCORDANCE WITH ANY LOCAL, STATE AND FEDERAL
REGULATIONS REGARDING POLYMERIC WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|