===================== Product Identification =====================
MSDS NAME:COATING, POLYURETHANE BLACK 37030 ID 754201
NIIN:01-131-6254
Kit Part:Y
MSDS Number: BHCKV
=== Responsible Party ===
Company:PRATT & LAMBERT, INC.
Address:16116 E 13TH ST
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
Preparer's Name:W.A. ELLISON
CAGE:FO127
=== Contractor Identification ===
Company:PRATT & LAMBERT, INC/BUFFALO, NY 14240
Box:22
CAGE:FO127
Company:PRATT AND LAMBERT INC
Address:Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196
============= Composition/Information on Ingredients =============
Name:N-BUTYL ACETATE (SARA III)
CAS:123-86-4
RTECS #:AF7350000
OSHA PEL:150 PPM/200 STEL
ACGIH TLV:150 PPM/200STEL;9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:1,6-DIISOCYANATOHEXANE (HEXAMETHYLENE DIISOCYANATE)
CAS:822-06-0
RTECS #:MO1740000
ACGIH TLV:0.005 PPM; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:VOL ORGANIC CMPD 2.2 LB/GL LESS WATER & NPRS* 264 G/L LESS
WATER VOC 3.1 LB/GAL SOLIDS 372 G/L SOLIDS CALCULATED
RTECS #:9999999VO
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:SWALLOWING:MAY BE FATAL IF SWALLOWED.
CAN CAUSE GASTROINTESTINAL/NAUSEA/VOMITING.ASPIRATION OF MATERIAL
INTO LUNG MAY CAUSE PNEUMONITIS.INHALATION:WARNING VAPOR OR SPRAY
MIST HARMFUL. MAY CAUSE LUNG D AMAGE EYE & SKIN IRRITATION, MAY
CAUSE SKIN SENSITIZATION.
Effects of Overexposure:EXPOSURE TO DIISOCYANATES MAY RESULT IN
RESPIRATORY SENSITIZATION. OVEREXPOSURE TO SOLVENTS WITH PERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE. RESPIRATORY SENSITIVITY RESULTS IN
ASTHMA-LIKE SYMPTOMS ON S UBSEQUENT EXPOSURE AT CONCENTRATIONS EVEN
BELOW THE TLV.
Medical Cond Aggravated by Exposure:SEE ABOVE.
======================= First Aid Measures =======================
First Aid:SWALLOWING: DO NOT INDUCE VOMITING. GET MEDICAL ATTN
IMMEDIATELY. INHALATION:REMOVE TO FRESH AIR.KEEP WARM AND QUIET.GET
MED ATTN. EYE:WASH WITH WATER GET MED ATTN. SKIN:WASH AFFECTED
AREA.OBTAIN MED ATTN IF IRRITATION PERSISTS. NOTE TO PHYSICIAN:
ANY TREATMENT THAT MIGHT BE REQUIRED FOR OVEREXPOSURE SHOULD BE
DIRECTED AT THE CONTROL OF SYMPTOMS AND THE CLINICAL CONDITIONS.
===================== Fire Fighting Measures =====================
Flash Point:72F/22.22C
Extinguishing Media:CLASS B FIRE EXTINGUISHERS. POLYMER FOAM IS
PREFERRED FOR LARGE FIRES.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS. WATER
MAY BE USED TO COOL EXPOSED CONTAINERS TO PREVENT AUTO-IGNITION OR
EXPLOSION. FOG NOZZLES PREFERRED IF WATER USED
Unusual Fire/Explosion Hazard:OVEREXPOSURE TO DECOMPOSITION PRODUCTS
MAY CAUSE A HEALTH HAZARD. SYMPTOMS MAY NOT BE IMMEDIATELY
APPARENT. OBTAIN MEDICAL ATTENTION. WARNING: FLAMMABLE.
================== Accidental Release Measures ==================
Spill Release Procedures:USE NIOSH/MSHA APPROVED TC19C. ELIMINATE ALL
IGNITION SOURCES. DIKE WITH INERT MATERIAL. FOR RECOVERY OR
DISPOSAL USE METAL CONTAINERS. USE ONLY NON-SPARKING TOOLS. PREVENT
CONTAMINATION OF SEWERS, ST REAMS, GROUNDWATER.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE ABOVE 95F. STORE LARGE
QUANTITIES IN COMPLIANCE WITH OSHA 29CFR1910.106.
Other Precautions:THIS PRODUCT SHOULD BE USED BY PERSONS WHO HAVE HAD
CHRONIC BREATHING PROBLEMS OR REACTIONS TO ISOCYANATES. DO NOT
BREATH VAPOR SPRAY OR MIST. DO NOT GET ON SKIN, IN EYES OR ON
CLOTHING. WASH THOROUGH LY AFTER HANDLING.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WEAR POSITIVE PRESSURE AIR SUPPLIED RESPIRATOR
(TC 19C NIOSH/MSHA) WHILE EXPOSED IF NOT AVAILABLE USE A VAPOR
PARTICULATE RESPIRATOR. WEAR FOR THE WHOLE TIME WHILE MIXING,
SPRAYING AND UNTIL VAPORS AN D MISTS ARE GONE.
Ventilation:GENERAL DILUTION AND LOCAL EXHAUST VENTILATION IN
SUFFICIENT VOLUME AND PATTERN TO MAINTAIN CONCENTRATIONS.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:SAFETY SPECTACLES & CHEM SPLASH GOGGLES.
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
HAZARDOUS DECOMPOSITION PRODUCTS: THE REACTION OF ISOCYANATES WITH
WATER MAY PRODUCE HYDROGEN GAS WHICH MAY FORM FLAMMABLE OR
EXPLOSIVE MIXTURES WITH AIR.DO NOT WELD/BRAZE/CUT ON CONTAINER. DO
NOT REU SE.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:260F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:30
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS, OXIDIZING MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
IGNITION.
Hazardous Decomposition Products:BURNING/WELDING/CUTTING WILL PRODUCE
SMOKE, CARBON MONOXIDE AND CARBON DIOXIDE. OXIDES OF NITROGEN MAY
BE GENERATED.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT,SPARKS AND
FLAME.
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATE ONLY IN EPA FACILITY. CONTAMINATED
ABSORBANT DISPOSED IN A HAZARDOUS WASTE LANDFILL. DISPOSE ONLY IAW
FEDERAL/STATE/LOCAL REGULATIONS. RCRA CLASSIFICATION WOULD BE D001.
ENVIRONMENTAL HAZAR DS NONE KNOWN.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|