=====================  Product Identification  =====================

MSDS NAME:VARNISH, MOISTURE AND FUNGUS RESISTANCE
NIIN:00-180-6343
MSDS Number: BHDBL
=== Responsible Party ===
Company:RANBAR TECHNOLOGY INC. D/B/A
Address:1114 WM. FLINN HIGHWAY
City:GLENSHAW
ZIP:15116
Country:US
Info Phone Num:412-486-1111
Emergency Phone Num:412-486-1111
Preparer's Name:PAUL R. YINGST
CAGE:DO583
=== Contractor Identification ===
Company:BALL CHEMICAL CO
Address:1114 WILLIAM FLINN HIGHWAY
Box:City:GLENSHAW
State:PA
ZIP:15116-2316
Country:US
Phone:412-486-1111
CAGE:51747
Company:RANBAR TECHNOLOGY
Address:1114 WM. FLINN HIGHWAY
Box:City:GLENSHAW
Phone:412-486-1111
CAGE:DO583

=============  Composition/Information on Ingredients  =============

Name:MINERAL SPIRITS
CAS:64742-88-7
Fraction by Wt: 28%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

Name:TUNG OIL
CAS:67746-14-9
Fraction by Wt: 42%
Other REC Limits:NONE SPECIFIED

Name:SALICYLANILIDE
CAS:87-17-2
RTECS #:VN7850000
Fraction by Wt: 3-4%
Other REC Limits:NONE SPECIFIED

Name:2-BUTOXYETHANOL
CAS:111-76-2
RTECS #:KJ8575000
Fraction by Wt: 25%
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:VAPORS MAY IRRITATE THE EYES AND
    RESPIRATORY TRACT; IN HIGH CONCENTRATION,	   DEPRESSION OF
    CENTRAL NERVOUS SYSTEM. PROLONGED OR REPEATED CONTACT WITH SKIN  
    MAY RESULT IN SKIN IRRITATION AND DERMAT ITIS.
Effects of Overexposure:EYE IRRITATION, IRRITATION OF MUCOUS MEMBRANES,
    HEADACHE, DIZZINESS, NAUSEA, OR LOSS OF CONSCIOUSNESS.
Medical Cond Aggravated by Exposure:DRY SKIN, DERMATITIS, CHEMICAL
    PENUMONITTA,       PULMONARY EDEMA/HEMORRHAGE, AND DEPRESSION OF   
     CENTRAL NERVOUS SYSTEM.

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT: FLUSH WITH WATER.  SKIN CONTACT: REMOVE
    CONTAMINATED CLOTHING AND  WASH WITH SOAP AND WATER. INGESTION: DO
    NOT INDUCE VOMITING. GET MEDICAL HELP.

=====================  Fire Fighting Measures  =====================

Flash Point:110F  43C
Lower Limits:1.0
Upper Limits:11.0
Extinguishing Media:USE FOAM, WATER FOG, CARBON DIOXIDE OR DRY CHEMICAL
Fire Fighting Procedures:FIGHT FIRE IN CONFINED SPACE BY WEARING NIOSH
    APPROVED S.C.B.A., BUNKER COATS,  RUBBER GLOVES, &HELMET W/FACE
    SHIELD.COOL FIRE EXPOSED DRUMS WITH WATER.
Unusual Fire/Explosion Hazard:STORAGE CONTAINERS EXPOSED TO INTENSE
    HEAT FROM FIRE SHOULD BE COOLED WITH WATERTO PREVENT VAPOR PRESSURE
    BUILD-UP WHICH COULD RESULT IN RUPTURING THE CONTAINER

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. WEAR
    APPROPRIATE  RESPIRATOR AND PROTECTIVE CLOTHING. STOP SPILL AT
    SOURCE. DIKE AND CONTAIN SPILL. SOAK UP SPILL WITHA SUITABLE
    ABSORBENT. REPORT ALL SPILLS GREATER    THAN 5 GALLONS. CLEAN.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL PLACE. REMOVE WASTE FROM
    WORKPLACE  WITHIN 3 MONTHS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN POORLY VENTILATED AREAS, WEAR A NIOSH/MSA
    CHEMICAL CARTRIDGE RESPIRATOR.
Ventilation:LOCAL EXHAUST: OPEN WINDOWS, DOORS. 		       
    MECHANICAL: EXHAUST FAN
Protective Gloves:SOLVENT RESISTANT MATERIAL
Eye Protection:SAFETY GLASSES, FACE SHIELD
Other Protective Equipment:SAFETY SHOES
Work Hygienic Practices:WASH HANDS BEFORE EATING AND GOING TO THE REST
    ROOM; DO NOT SMOKE.
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:315 - 390F
Vapor Pres:< 10
Vapor Density:4.6
Spec Gravity:.9
Evaporation Rate & Reference:< 1 (BUTYL ACETATE = 1)
Solubility in Water:SLIGHT
Appearance and Odor:DARK AMBER LIQUID, MILD ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:KEEP PRODUCT AWAY FROM INTENSE HEAT
    SOURCES AND OPEN FLAMES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PLACE THE "USED" ABSORBENT IN A NON-LEAKING     
     CONTAINER, SEAL TIGHTLY, & MARK FOR WASTE DISPOSALTHE HAZARDOUS
    WASTE NO. IS D001

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***