=====================  Product Identification  =====================

MSDS NAME:EA 9313 EPOXY, PART A
NIIN:01-107-4000
Kit Part:Y
MSDS Number: BHGFL
=== Responsible Party ===
Company:DEXTER ADHESIVES AND STRUCTURAL MATERIALS DIVISION
Address:2850 WILLOW PASS ROAD
Box:312
City:PITTSBURG
State:CA
ZIP:94565-3237
Country:US
Info Phone Num:415-687-4201
Emergency Phone Num:415-687-4201
Preparer's Name:SUZANNE FRANZ
CAGE:33564
=== Contractor Identification ===
Company:DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Address:2850 WILLOW PASS ROAD
Box:312
City:BAY POINT
State:CA
ZIP:94565-3299
Country:US
Phone:202-483-7616
CAGE:33564
Company:PNEU DEVICES INC
Address:72 SANTA FELICIA DR
Box:City:GOLETA
State:CA
ZIP:93117-2804
Country:US
CAGE:33654

=============  Composition/Information on Ingredients  =============

Name:EPOXY RESIN SYSTEM

Name:PIGMENT  (WHITE PER TIR)

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE IRRITATION AND POSSIBLE
    ALLERGIC REACTIONS. MAY SENSITIZE ALLERGIC REACTIONS.
Explanation of Carcinogenicity:NONE OF THE COMPOUNDS IN THIS PRODUCT IS
    LISTED BY IARC, NTP, OR OSHA AS A CARCINOGEN.
Effects of Overexposure:POSSIBLE SKIN IRRITATION OR SENSITIZATION, EYE
    IRRITATION
Medical Cond Aggravated by Exposure:ANY RESPIRATORY OR SKIN CONDITION.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/ WATER 15 MIN HOLD LIDS OPEN. SEE A DOCTOR.
    SKIN:REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE  REUSE.  WASH
    WITH SOAP & WATER, ALCOHOL, OR HAND CLEANER. INHALATION:PRODUCT IS
    NOT VOLATI LE AND THUS NO PROBLEM AT NORMAL TEMPERATURE.
    INGESTED:UNLIKELY, BUT IF OCCURRING, GET IMMEDIATE MEDICAL CARE. 
    IF IRRITATION PERSISTS,OR IS SEVERE,SEE A DOCTOR.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:>300F,>149C
Extinguishing Media:USE CARBON DIOXIDE, FOAM, DRY CHEMICAL, OR WATER
    FOG.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
    FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
    SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
    PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS AND/OR DENSE SMOKE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE UP OR ABSORB ON SUITABLE MATERIAL AND
    SHOVEL UP. AVOID ALL PERSONAL CONTACT. CLEAN AREA WITH SOLVENT
    OBSERVING ANY FLAMMABILITY OF THE SOLVENT.
Neutralizing Agent:NONE. SOLVENT; ALCOHOL

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL AREA PER LABEL. KEEP
    AWAY FROM HEAT, SPARKS AND OPEN FLAMES. KEEP CONTAINER CLOSED WHEN
    NOT IN USE.
Other Precautions:OBSERVE ALL LABEL WARNINGS UNTIL THE CONTAINER HAS
    BEEN CLEANED OR RECONDITIONED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY REQUIRED. WEAR APPROPRIATE,
    PROPERLY FITTED RESPIRATOR (NIOSH/MSHA APPROVED FOR ORGANIC
    VAPORS/MISTS) IF EXPOSED ABOVE PEL/TLV.
Ventilation:USE LOCAL EXHAUST RECOMMENDED BY MFR.
Protective Gloves:BUTYL, PVA OR VITON RUBBER GLOVES
Eye Protection:SAFETY GLASSES OR SPLASH GOGGLES
Other Protective Equipment:AS NECESSARY TO AVOID PROLONGED AND/OR
    REPEATED CONTACT.
Work Hygienic Practices:USE GOOD CHEMICAL HYGIENE PRACTICE. AVOID ANY
    UNNECESSARY CONTACT.
Supplemental Safety and Health
KEY1:V5. THIS PRODUCT IS A KIT CONSISTING OF TWO PARTS. PART ONE, HAS
    PNI A; PART TWO HAS PNI B, SAME NSN.

==================  Physical/Chemical Properties  ==================

HCC:V5
Boiling Pt:B.P. Text:DECOMPOSES
Vapor Pres:<0.01 MM
Vapor Density:NIL
Spec Gravity:>1
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:MILKY WHITE PASTE, (NO ODOR GIVEN)

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, OR STRONG ACIDS
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, AND OPEN FLAMES
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE,
    NITROGEN OXIDES,ALDEHYDES, ACIDS, OTHER MISCELLANEOUS ORGANIC
    COMPOUNDS
Conditions to Avoid Polymerization:AVOID MIXING IN BATCHES GREATER THAN
    ONE POUND.	DO NOT HEAT ABOVE 75F UNLESS CURING SURFACES TO BE
    BONDED.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE I/A/W FEDERAL,STATE,LOCAL REGULATIONS.
    DO NOT INCINERATE CLOSED CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***