MATERIAL SAFETY DATA SHEET
Page 1 of 5
Applied Biochemists Tile Max Plus
1. Product And Company Identification
Supplier Manufacturer
Applied Biochemists Advantis Technologies, Inc.
1400 Bluegrass Lakes Parkway 1400 Bluegrass Lakes Parkway
Alpharetta, GA 30004 United States Alpharetta, GA 30004 United States
Telephone Number: (770) 521-5999 Telephone Number: (770) 521-5999
FAX Number: (770) 521-5959 FAX Number: (770) 521-5959
Web Site: www.poolspacare.com Web Site: www.poolspacare.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC - DAY OR NIGHT: (800) 424-9300 CHEMTREC - DAY OR NIGHT: (800) 424-9300
Issue Date: 09/01/2004
Product Name: Applied Biochemists Tile Max Plus
Chemical Family: Acid Mixture
Chemical Formula: Proprietary
MSDS Number: 322
Product Code: Proprietary
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
AMINES, TALLOW ALKYL, ETHOXYLATED 61791-26-2
HYDROCHLORIC ACID 7647-01-0
OCTYLPHENOXYPOLYETHOXYETHANOL 9036-19-5
PHOSPHORICACID 7664-38-2
SULFURIC ACID 7664-93-9
Ingredients listed in this section have been determined to be hazardous as defined in 29CFR 1910.1200. Materials
determined to be health hazards are listed if they comprise 1% or more of the composition. Materials identified as
carcinogens are listed if they comprise 0.1% or more of the composition. Information on proprietary materials is available in
29CFR 1910.1200(i)(1).
Hazards Identification (Pictograms)
3. Hazards Identification
Primary Routes(s) Of Entry
Eye Contact, Skin Contact
Eye Hazards
Causes severe eye burns.
Skin Hazards
Causes severe skin burns.
Ingestion Hazards
Corrosive to living tissue.
MATERIAL SAFETY DATA SHEET Page 2 of 5
Applied Biochemists Tile Max Plus
3. Hazards Identification - Continued
Inhalation Hazards
May cause severe allergic respiratory reaction.
Signs And Symptoms
Irritation of Eyes, Skin and Respiratory Passages
First Aid (Pictograms)
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes.Call a
physician or a poison control center immediately.
Skin
Rinse the affected area with tepid water for at least 15 minutes.Get medical attention immediately if irritation
(redness, rash, blistering) develops and persists.
Ingestion
DO NOT INDUCE VOMITING. Drink large amounts of water. Contact a physician or poison control.
Inhalation
If inhaled, remove to fresh air. If breathing is difficult, give oxygen. Call a physician or a poison control center
immediately.
Fire Fighting (Pictograms)
5. Fire Fighting Measures
Flash Point: N/A 掳F
Extinguishing Media
Use the appropriate extinguishing media for the surrounding fire.
Fire Fighting Instructions
Water can be used to cool and protect exposed material. Firefighters should wear self-contained breathing apparatus
and full protective gear.
6. Accidental Release Measures
Neutralize spill area with soda ash or lime. Flood with water. Use appropriate containers to avoid environmental
contamination. Use appropriate personal protective equipment (PPE).
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Do not store with alkalis.
Handling Precautions
Avoid contact with eyes. Avoid contact with skin and clothing. Wash thoroughly after handling.
Storage Precautions
Avoid contact with Alkalis, Amines, and Metals. Keep out of reach of children.
MATERIAL SAFETY DATA SHEET Page 3 of 5
Applied Biochemists Tile Max Plus
7. Handling And Storage - Continued
Work/Hygienic Practices
Use safe chemical handling procedures suitable for the hazards presended by this material.
Protective Clothing (Pictograms)
8. Exposure Controls/Personal Protection
Engineering Controls
Local exhaust acceptable. Special exhaust not required
Eye/Face Protection
Safety glasses with side shields or goggles recommended.
Skin Protection
Chemical-resistant gloves.
Respiratory Protection
None normally required.
Ingredient(s) - Exposure Limits
HYDROCHLORIC ACID
ACGIH TLV-CEILING 5 ppm
OSHA PEL-CEILING 5 ppm
PHOSPHORIC ACID
ACGIH TLV-STEL 3 mg/m3
ACGIH TLV-TWA 1 mg/m3
OSHA PEL-TWA 1 mg/m3
SULFURIC ACID
ACGIH TLV-STEL 3 mg/m3
ACGIH TLV-TWA 1 mg/m3
OSHA PEL-TWA 1 mg/m3
9. Physical And Chemical Properties
Appearance
amber, viscous liquid
Odor
Mild
Chemical Type: Mixture
Physical State: Liquid
Melting Point: n/a 掳F
Boiling Point: 212 掳F
Specific Gravity: 1.1-1.2
Percent Volitales: NOT DETERMINED
Packing Density: NOT DETERMINED
Vapor Pressure: NOT DETERMINED
Vapor Density: >1
pH Factor: 0-2
Solubility: Soluble in Water
Viscosity: NOT DETERMINED
Evaporation Rate: <1
MATERIAL SAFETY DATA SHEET Page 4 of 5
Applied Biochemists Tile Max Plus
10. Stability And Reactivity
Sta bility: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
Avoid contact with strong Amines, Alkalis, and Metals. Heat can cause hydrogen chloride.
Incompatible Materials
Alkalis, Amines and Metals
Hazardous Decomposition Products
Hydrogen Chloride
11. Toxicological Information
Ingredient(s) - Carginogenicity
SULFURIC ACID
NTP - Listed On The National Toxicology Program
Listed In The IARC Monographs
12. Ecological Information
No Data Available...
13. Disposal Considerations
Refer to applicable federal, state, and local regulations prior to disposition of container and residual contents.
14. Transport Information
Proper Shipping Name
Corrosive, Liquid, Acidic, Inorganic, N.O.S. (Hydrochloric and Sulfuric Acids)
Hazard Class
8, PGII (<1L Consumer Commodity ORM-D)
DOT Identification Number
UN3264
DOT (Pictograms)
15. Regulatory Information
SARA Title III - Section 313 Supplier Notification
This product contains the following toxic chemicals that are subject to the reporting requirements of section 313 of
the Emergency Planning and Community Right-To-Know Act (EPCRA) of 1986 and of 40 CFR 372.
HYDROCHLORIC ACID (7647-01-0) %
SULFURIC ACID (7664-93-9) %
This information must be included on all MSDSs that are copied and distributed for this material.
Ingredient(s) - U.S. Regulatory Information
HYDROCHLORIC ACID
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
SULFURIC ACID
SARA Title III - EPA Part 355 Extremely Hazardous Substance
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
MATERIAL SAFETY DATA SHEET Page 5 of 5
Applied Biochemists Tile Max Plus
15. Regulatory Information - Continued
Ingredient(s) - State Regulations
HYDROCHLORIC ACID
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
New Jersey - Special Hazard
New Jersey - TCPA Extraordinarily Hazardous Substance
Pennsylvania - Workplace Hazard
Pennsylvania - Environmental Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
SULFURIC ACID
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Pennsylvania - Environmental Hazard
California - CalARP Table 3 Regulated Substance
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
Canadian Regulatory Information
Class D, Div 1a - Poisonous or Infectious Material: immediate and serious toxic effects
Class D, Div 2a - Poisonous or Infectious Material: other toxic effects
Class D, Div 2b - Poisonous or Infectious Material: other toxic effects
Class E - Corrosive Material
WHMIS - Canada (Pictograms)
NFPA HMIS
HEALTH 3
1
FLAMMABILITY 0
2 2
REACTIVITY 1
X
PERSONAL PROTECTION
16. Other Information
Revision/Preparer Information
MSDS Preparer: JHW
This MSDS Superceeds A Previous MSDS Dated: 07/02/2002
Disclaimer
Although reasonable care has been taken in the preparation of this document, we extend no warranties
and make no representations as to the accuracy or completeness of the information contained therein,
and assume no responsibility regarding the suitablility of this information for the user's intended purposes
or for the consequences of its use. Each individual should make a determination as to the suitability of
the information for their particular purposes(s).
Applied Biochemists
Printed Using MSDS Generator鈩? 2000
|